From: soren.brinkmann@xilinx.com (Soren Brinkmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH LINUX v4 09/13] tty: xuartps: Move RX path into helper function
Date: Sat, 5 Dec 2015 20:39:25 -0800 [thread overview]
Message-ID: <1449376769-13369-10-git-send-email-soren.brinkmann@xilinx.com> (raw)
In-Reply-To: <1449376769-13369-1-git-send-email-soren.brinkmann@xilinx.com>
Move RX-related IRQ handling into a helper function.
Fixes a problem where every char received after a parity or frame error
in the current isr will also be tagged as a parity or frame error.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
---
v4:
- added Peter's additional information to the commit message (thx)
---
drivers/tty/serial/xilinx_uartps.c | 50 +++++++++++++++++++++-----------------
1 file changed, 28 insertions(+), 22 deletions(-)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 80248cb46bf6..3780d1cf207e 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -172,28 +172,8 @@ struct cdns_uart {
#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \
clk_rate_change_nb);
-/**
- * cdns_uart_isr - Interrupt handler
- * @irq: Irq number
- * @dev_id: Id of the port
- *
- * Return: IRQHANDLED
- */
-static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
+static void cdns_uart_handle_rx(struct uart_port *port, unsigned int isrstatus)
{
- struct uart_port *port = (struct uart_port *)dev_id;
- unsigned long flags;
- unsigned int isrstatus, numbytes;
- unsigned int data;
- char status = TTY_NORMAL;
-
- spin_lock_irqsave(&port->lock, flags);
-
- /* Read the interrupt status register to determine which
- * interrupt(s) is/are active.
- */
- isrstatus = readl(port->membase + CDNS_UART_ISR_OFFSET);
-
/*
* There is no hardware break detection, so we interpret framing
* error with all-zeros data as a break sequence. Most of the time,
@@ -223,6 +203,9 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
/* Receive Timeout Interrupt */
while (!(readl(port->membase + CDNS_UART_SR_OFFSET) &
CDNS_UART_SR_RXEMPTY)) {
+ u32 data;
+ char status = TTY_NORMAL;
+
data = readl(port->membase + CDNS_UART_FIFO_OFFSET);
/* Non-NULL byte after BREAK is garbage (99%) */
@@ -263,10 +246,33 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
}
uart_insert_char(port, isrstatus, CDNS_UART_IXR_OVERRUN,
- data, status);
+ data, status);
}
tty_flip_buffer_push(&port->state->port);
}
+}
+
+/**
+ * cdns_uart_isr - Interrupt handler
+ * @irq: Irq number
+ * @dev_id: Id of the port
+ *
+ * Return: IRQHANDLED
+ */
+static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
+{
+ struct uart_port *port = (struct uart_port *)dev_id;
+ unsigned long flags;
+ unsigned int isrstatus, numbytes;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Read the interrupt status register to determine which
+ * interrupt(s) is/are active.
+ */
+ isrstatus = readl(port->membase + CDNS_UART_ISR_OFFSET);
+
+ cdns_uart_handle_rx(port, isrstatus);
/* Dispatch an appropriate handler */
if ((isrstatus & CDNS_UART_IXR_TXEMPTY) == CDNS_UART_IXR_TXEMPTY) {
--
2.6.3.3.g9bb996a
next prev parent reply other threads:[~2015-12-06 4:39 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-06 4:39 [PATCH LINUX v4 00/13] tty: xuartps: Fix lock ups Soren Brinkmann
2015-12-06 4:39 ` [PATCH LINUX v4 01/13] tty: xuartps: Beautify read-modify writes Soren Brinkmann
2015-12-06 4:39 ` [PATCH LINUX v4 02/13] tty: xuartps: Use spinlock to serialize HW access Soren Brinkmann
2015-12-06 4:39 ` [PATCH LINUX v4 03/13] tty: xuartps: Don't consider circular buffer when enabling transmitter Soren Brinkmann
2015-12-06 4:39 ` [PATCH LINUX v4 04/13] tty: xuartps: Clear interrupt status register in shutdown Soren Brinkmann
2015-12-06 4:39 ` [PATCH LINUX v4 05/13] tty: xuartps: Improve startup function Soren Brinkmann
2015-12-06 4:39 ` [PATCH LINUX v4 06/13] tty: xuartps: Move request_irq to after setting up the HW Soren Brinkmann
2015-12-10 21:41 ` Peter Hurley
2015-12-15 15:41 ` Sören Brinkmann
2015-12-15 23:26 ` Peter Hurley
2015-12-16 9:03 ` Sören Brinkmann
2015-12-16 14:37 ` Peter Hurley
2015-12-17 10:00 ` Sören Brinkmann
2015-12-06 4:39 ` [PATCH LINUX v4 07/13] tty: xuartps: Keep lock for whole ISR Soren Brinkmann
2015-12-06 4:39 ` [PATCH LINUX v4 08/13] tty: xuartps: Acquire port lock for shutdown Soren Brinkmann
2015-12-06 4:39 ` Soren Brinkmann [this message]
2015-12-06 4:39 ` [PATCH LINUX v4 10/13] tty: xuartps: Refactor IRQ handling Soren Brinkmann
2015-12-06 4:39 ` [PATCH LINUX v4 11/13] tty: xuartps: Cleanup: Reformat if-else Soren Brinkmann
2015-12-06 4:39 ` [PATCH LINUX v4 12/13] tty: xuartps: Improve sysrq handling Soren Brinkmann
2015-12-06 4:39 ` [PATCH LINUX v4 13/13] tty: xuartps: Remove '_OFFSET' suffix from #defines Soren Brinkmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449376769-13369-10-git-send-email-soren.brinkmann@xilinx.com \
--to=soren.brinkmann@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).