From mboxrd@z Thu Jan 1 00:00:00 1970 From: vz@mleia.com (Vladimir Zapolskiy) Date: Sun, 6 Dec 2015 13:31:57 +0200 Subject: [PATCH v2 1/6] dt: lpc32xx: pwm: correct LPC32xx PWM device node example In-Reply-To: <1449401522-22590-1-git-send-email-vz@mleia.com> References: <1449401522-22590-1-git-send-email-vz@mleia.com> Message-ID: <1449401522-22590-2-git-send-email-vz@mleia.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The change removes '0x' from a device node address and uses lower case hex chars. Signed-off-by: Vladimir Zapolskiy --- Changes from v1 to v2: - new change Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt index cfe1db3..1ab1abc 100644 --- a/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt @@ -6,7 +6,7 @@ Required properties: Examples: -pwm at 0x4005C000 { +pwm at 4005c000 { compatible = "nxp,lpc3220-pwm"; - reg = <0x4005C000 0x8>; + reg = <0x4005c000 0x8>; }; -- 2.1.4