From: jeffy.chen@rock-chips.com (Jeffy Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 2/8] clk: rockchip: add dt-binding header for rk3228
Date: Wed, 9 Dec 2015 17:04:07 +0800 [thread overview]
Message-ID: <1449651853-1667-3-git-send-email-jeffy.chen@rock-chips.com> (raw)
In-Reply-To: <1449651853-1667-1-git-send-email-jeffy.chen@rock-chips.com>
Add the dt-bindings header for the rk3228, that gets shared between
the clock controller and the clock references in the dts.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
---
include/dt-bindings/clock/rk3228-cru.h | 220 +++++++++++++++++++++++++++++++++
1 file changed, 220 insertions(+)
create mode 100644 include/dt-bindings/clock/rk3228-cru.h
diff --git a/include/dt-bindings/clock/rk3228-cru.h b/include/dt-bindings/clock/rk3228-cru.h
new file mode 100644
index 0000000..a78dd89
--- /dev/null
+++ b/include/dt-bindings/clock/rk3228-cru.h
@@ -0,0 +1,220 @@
+/*
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Jeffy Chen <jeffy.chen@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3228_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3228_H
+
+/* core clocks */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_CPLL 3
+#define PLL_GPLL 4
+#define ARMCLK 5
+
+/* sclk gates (special clocks) */
+#define SCLK_SPI0 65
+#define SCLK_NANDC 67
+#define SCLK_SDMMC 68
+#define SCLK_SDIO 69
+#define SCLK_EMMC 71
+#define SCLK_UART0 77
+#define SCLK_UART1 78
+#define SCLK_UART2 79
+#define SCLK_I2S0 80
+#define SCLK_I2S1 81
+#define SCLK_I2S2 82
+#define SCLK_SPDIF 83
+#define SCLK_TIMER0 85
+#define SCLK_TIMER1 86
+#define SCLK_TIMER2 87
+#define SCLK_TIMER3 88
+#define SCLK_TIMER4 89
+#define SCLK_TIMER5 90
+#define SCLK_I2S_OUT 113
+#define SCLK_SDMMC_DRV 114
+#define SCLK_SDIO_DRV 115
+#define SCLK_EMMC_DRV 117
+#define SCLK_SDMMC_SAMPLE 118
+#define SCLK_SDIO_SAMPLE 119
+#define SCLK_EMMC_SAMPLE 121
+
+/* aclk gates */
+#define ACLK_DMAC 194
+#define ACLK_PERI 210
+
+/* pclk gates */
+#define PCLK_GPIO0 320
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GPIO3 323
+#define PCLK_GRF 329
+#define PCLK_I2C0 332
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_I2C3 335
+#define PCLK_SPI0 338
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_PWM 350
+#define PCLK_TIMER 353
+#define PCLK_PERI 363
+
+/* hclk gates */
+#define HCLK_NANDC 453
+#define HCLK_SDMMC 456
+#define HCLK_SDIO 457
+#define HCLK_EMMC 459
+#define HCLK_PERI 478
+
+#define CLK_NR_CLKS (HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0_PO 0
+#define SRST_CORE1_PO 1
+#define SRST_CORE2_PO 2
+#define SRST_CORE3_PO 3
+#define SRST_CORE0 4
+#define SRST_CORE1 5
+#define SRST_CORE2 6
+#define SRST_CORE3 7
+#define SRST_CORE0_DBG 8
+#define SRST_CORE1_DBG 9
+#define SRST_CORE2_DBG 10
+#define SRST_CORE3_DBG 11
+#define SRST_TOPDBG 12
+#define SRST_ACLK_CORE 13
+#define SRST_NOC 14
+#define SRST_L2C 15
+
+#define SRST_CPUSYS_H 18
+#define SRST_BUSSYS_H 19
+#define SRST_SPDIF 20
+#define SRST_INTMEM 21
+#define SRST_ROM 22
+#define SRST_OTG_ADP 23
+#define SRST_I2S0 24
+#define SRST_I2S1 25
+#define SRST_I2S2 26
+#define SRST_ACODEC_P 27
+#define SRST_DFIMON 28
+#define SRST_MSCH 29
+#define SRST_EFUSE1024 30
+#define SRST_EFUSE256 31
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_GPIO3 35
+#define SRST_PERIPH_NOC_A 36
+#define SRST_PERIPH_NOC_BUS_H 37
+#define SRST_PERIPH_NOC_P 38
+#define SRST_UART0 39
+#define SRST_UART1 40
+#define SRST_UART2 41
+#define SRST_PHYNOC 42
+#define SRST_I2C0 43
+#define SRST_I2C1 44
+#define SRST_I2C2 45
+#define SRST_I2C3 46
+
+#define SRST_PWM 48
+#define SRST_A53_GIC 49
+#define SRST_DAP 51
+#define SRST_DAP_NOC 52
+#define SRST_CRYPTO 53
+#define SRST_SGRF 54
+#define SRST_GRF 55
+#define SRST_GMAC 56
+#define SRST_PERIPH_NOC_H 58
+#define SRST_MACPHY 63
+
+#define SRST_DMA 64
+#define SRST_NANDC 68
+#define SRST_USBOTG 69
+#define SRST_OTGC 70
+#define SRST_USBHOST0 71
+#define SRST_HOST_CTRL0 72
+#define SRST_USBHOST1 73
+#define SRST_HOST_CTRL1 74
+#define SRST_USBHOST2 75
+#define SRST_HOST_CTRL2 76
+#define SRST_USBPOR0 77
+#define SRST_USBPOR1 78
+#define SRST_DDRMSCH 79
+
+#define SRST_SMART_CARD 80
+#define SRST_SDMMC 81
+#define SRST_SDIO 82
+#define SRST_EMMC 83
+#define SRST_SPI 84
+#define SRST_TSP_H 85
+#define SRST_TSP 86
+#define SRST_TSADC 87
+#define SRST_DDRPHY 88
+#define SRST_DDRPHY_P 89
+#define SRST_DDRCTRL 90
+#define SRST_DDRCTRL_P 91
+#define SRST_HOST0_ECHI 92
+#define SRST_HOST1_ECHI 93
+#define SRST_HOST2_ECHI 94
+#define SRST_VOP_NOC_A 95
+
+#define SRST_HDMI_P 96
+#define SRST_VIO_ARBI_H 97
+#define SRST_IEP_NOC_A 98
+#define SRST_VIO_NOC_H 99
+#define SRST_VOP_A 100
+#define SRST_VOP_H 101
+#define SRST_VOP_D 102
+#define SRST_UTMI0 103
+#define SRST_UTMI1 104
+#define SRST_UTMI2 105
+#define SRST_UTMI3 106
+#define SRST_RGA 107
+#define SRST_RGA_NOC_A 108
+#define SRST_RGA_A 109
+#define SRST_RGA_H 110
+#define SRST_HDCP_A 111
+
+#define SRST_VPU_A 112
+#define SRST_VPU_H 113
+#define SRST_VPU_NOC_A 116
+#define SRST_VPU_NOC_H 117
+#define SRST_RKVDEC_A 118
+#define SRST_RKVDEC_NOC_A 119
+#define SRST_RKVDEC_H 120
+#define SRST_RKVDEC_NOC_H 121
+#define SRST_RKVDEC_CORE 122
+#define SRST_RKVDEC_CABAC 123
+#define SRST_IEP_A 124
+#define SRST_IEP_H 125
+#define SRST_GPU_A 126
+#define SRST_GPU_NOC_A 127
+
+#define SRST_CORE_DBG 128
+#define SRST_DBG_P 129
+#define SRST_TIMER0 130
+#define SRST_TIMER1 131
+#define SRST_TIMER2 132
+#define SRST_TIMER3 133
+#define SRST_TIMER4 134
+#define SRST_TIMER5 135
+#define SRST_VIO_H2P 136
+#define SRST_HDMIPHY 139
+#define SRST_VDAC 140
+#define SRST_TIMER_6CH_P 141
+
+#endif
--
2.1.4
next prev parent reply other threads:[~2015-12-09 9:04 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-09 9:04 [PATCH v1 0/8] This serial of patches add dts/pinctrl/clock-tree/doc for rk3228 Jeffy Chen
2015-12-09 9:04 ` [PATCH v1 1/8] pinctrl: rockchip: add support for the rk3228 Jeffy Chen
2015-12-09 11:30 ` Heiko Stübner
2015-12-09 20:09 ` Rob Herring
2015-12-11 18:10 ` Linus Walleij
2015-12-09 9:04 ` Jeffy Chen [this message]
2015-12-09 23:17 ` [PATCH v1 2/8] clk: rockchip: add dt-binding header for rk3228 Heiko Stuebner
2015-12-09 9:04 ` [PATCH v1 3/8] rockchip: add clock controller " Jeffy Chen
2015-12-10 0:19 ` Heiko Stuebner
2015-12-11 1:46 ` Jeffy Chen
2015-12-09 9:04 ` [PATCH v1 4/8] dt-bindings: add documentation of rk3228 clock controller Jeffy Chen
2015-12-09 20:12 ` Rob Herring
2015-12-09 23:11 ` Heiko Stuebner
2015-12-09 23:17 ` Heiko Stuebner
2015-12-09 9:04 ` [PATCH v1 5/8] clk: rockchip: allow more than 2 parents for cpuclk Jeffy Chen
2015-12-09 21:35 ` Heiko Stuebner
2015-12-09 9:04 ` [PATCH v1 6/8] ARM: rockchip: enable support for RK3228 SoCs Jeffy Chen
2015-12-09 21:27 ` Heiko Stuebner
2015-12-09 9:04 ` [PATCH v1 7/8] ARM: dts: rockchip: add core rk3228 dtsi Jeffy Chen
2015-12-10 0:32 ` Heiko Stuebner
2015-12-11 1:53 ` Jeffy Chen
2015-12-11 10:12 ` Heiko Stübner
2015-12-12 2:34 ` Jeffy Chen
2015-12-09 9:04 ` [PATCH v1 8/8] ARM: dts: rockchip: add rk3228-evb board Jeffy Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449651853-1667-3-git-send-email-jeffy.chen@rock-chips.com \
--to=jeffy.chen@rock-chips.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).