From mboxrd@z Thu Jan 1 00:00:00 1970 From: eric@anholt.net (Eric Anholt) Date: Tue, 15 Dec 2015 15:35:59 -0800 Subject: [PATCH v2 3/3] ARM: bcm2835: Add the auxiliary clocks to the device tree. In-Reply-To: <1450222559-22461-1-git-send-email-eric@anholt.net> References: <1450222559-22461-1-git-send-email-eric@anholt.net> Message-ID: <1450222559-22461-3-git-send-email-eric@anholt.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org These will be used for enabling UART1, SPI1, and SPI2. Signed-off-by: Eric Anholt --- v2: Make the binding cover both the IRQ and clock enable registers. arch/arm/boot/dts/bcm2835.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index aef64de..a27d40b 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -73,6 +73,13 @@ clocks = <&clk_osc>; }; + aux: aux at 0x7e215000 { + compatible = "brcm,bcm2835-aux"; + #clock-cells = <1>; + reg = <0x7e215000 0x8>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + }; + rng at 7e104000 { compatible = "brcm,bcm2835-rng"; reg = <0x7e104000 0x10>; -- 2.6.2