[PATCH 0/4] ARM: dts: sun7i: Devicetree improvements for the Wexler TAB7200

linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 0/4] ARM: dts: sun7i: Devicetree improvements for the Wexler TAB7200
@ 2015-12-18  8:49 Aleksei Mamlin
  2015-12-18  8:51 ` [PATCH 1/4] ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet Aleksei Mamlin
                   ` (3 more replies)
  0 siblings, 4 replies; 12+ messages in thread
From: Aleksei Mamlin @ 2015-12-18  8:49 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Maxime,
This is a batch of patches with devicetree improvements for Wexler TAB7200 tablet.

The first one add Goodix GT911 touchscreen node to dts.
The second add PWM node, which need for LCD backlight.
The third add LCD backlight support via PWM.
The last add PA gpio pin for controlling external amplifiers.

The touchscreen patch depends on "Goodix touchscreen enhancements" [1]
and "Input: goodix - add axis swapping and axis inversion support" [2]
patchsets. Both merged into Dmitry Torokhov's input tree (goodix branch)

[1] https://lkml.org/lkml/2015/11/19/241
[2] https://lkml.org/lkml/2015/11/21/44

Aleksei Mamlin (4):
  ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet
  ARM: dts: sun7i: Enable PWM controller on Wexler TAB7200 tablet
  ARM: dts: sun7i: Add backlight node to Wexler TAB7200 tablet
  ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet

 arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 53 ++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

-- 
2.4.10

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 1/4] ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet
  2015-12-18  8:49 [PATCH 0/4] ARM: dts: sun7i: Devicetree improvements for the Wexler TAB7200 Aleksei Mamlin
@ 2015-12-18  8:51 ` Aleksei Mamlin
  2015-12-18 21:25   ` Maxime Ripard
  2015-12-21 15:44   ` Maxime Ripard
  2015-12-18  8:52 ` [PATCH 2/4] ARM: dts: sun7i: Enable PWM controller " Aleksei Mamlin
                   ` (2 subsequent siblings)
  3 siblings, 2 replies; 12+ messages in thread
From: Aleksei Mamlin @ 2015-12-18  8:51 UTC (permalink / raw)
  To: linux-arm-kernel

Add a node for the Goodix GT911 touchscreen found on the Wexler TAB7200 tablet

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
---
 arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
index 239b5d2..ec3b837 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -102,6 +102,18 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
+
+	gt911: touchscreen at 5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_reset_pin>;
+		irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
+		reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
+		touchscreen-swapped-x-y;
+	};
 };
 
 &lradc {
@@ -146,6 +158,13 @@
 };
 
 &pio {
+	ts_reset_pin: ts_reset_pin at 0 {
+		allwinner,pins = "PB13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	usb0_id_detect_pin: usb0_id_detect_pin at 0 {
 		allwinner,pins = "PH4";
 		allwinner,function = "gpio_in";
-- 
2.4.10

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH 1/4] ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet
  2015-12-18  8:51 ` [PATCH 1/4] ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet Aleksei Mamlin
@ 2015-12-18 21:25   ` Maxime Ripard
       [not found]     ` <CAF==cZWcY=FH9Sr8RY4j4Ob8iuiYrBGkajZDWpNQzS-t4d074Q@mail.gmail.com>
  2015-12-21 15:44   ` Maxime Ripard
  1 sibling, 1 reply; 12+ messages in thread
From: Maxime Ripard @ 2015-12-18 21:25 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

On Fri, Dec 18, 2015 at 11:51:50AM +0300, Aleksei Mamlin wrote:
> Add a node for the Goodix GT911 touchscreen found on the Wexler TAB7200 tablet
> 
> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
> ---
>  arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> index 239b5d2..ec3b837 100644
> --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> @@ -102,6 +102,18 @@
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&i2c2_pins_a>;
>  	status = "okay";
> +
> +	gt911: touchscreen at 5d {
> +		compatible = "goodix,gt911";
> +		reg = <0x5d>;
> +		interrupt-parent = <&pio>;
> +		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ts_reset_pin>;
> +		irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */

It seems odd that you need both irq-gpios and interrupts. These two
are completely redundant, and you should even actually use only one in
your driver, since the second request_irq will fail.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151218/18d43e8e/attachment.sig>

^ permalink raw reply	[flat|nested] 12+ messages in thread

[parent not found: <CAF==cZWcY=FH9Sr8RY4j4Ob8iuiYrBGkajZDWpNQzS-t4d074Q@mail.gmail.com>]

* [PATCH 1/4] ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet
       [not found]     ` <CAF==cZWcY=FH9Sr8RY4j4Ob8iuiYrBGkajZDWpNQzS-t4d074Q@mail.gmail.com>
@ 2015-12-21 15:43       ` Maxime Ripard
  0 siblings, 0 replies; 12+ messages in thread
From: Maxime Ripard @ 2015-12-21 15:43 UTC (permalink / raw)
  To: linux-arm-kernel

On Sat, Dec 19, 2015 at 06:11:40PM +0300, Aleksei Mamlin wrote:
> 2015-12-19 0:25 GMT+03:00 Maxime Ripard <maxime.ripard@free-electrons.com>:
> 
> > Hi,
> >
> > On Fri, Dec 18, 2015 at 11:51:50AM +0300, Aleksei Mamlin wrote:
> > > Add a node for the Goodix GT911 touchscreen found on the Wexler TAB7200
> > tablet
> > >
> > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
> > > ---
> > >  arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 19 +++++++++++++++++++
> > >  1 file changed, 19 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> > b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> > > index 239b5d2..ec3b837 100644
> > > --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> > > +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> > > @@ -102,6 +102,18 @@
> > >       pinctrl-names = "default";
> > >       pinctrl-0 = <&i2c2_pins_a>;
> > >       status = "okay";
> > > +
> > > +     gt911: touchscreen at 5d {
> > > +             compatible = "goodix,gt911";
> > > +             reg = <0x5d>;
> > > +             interrupt-parent = <&pio>;
> > > +             interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21
> > (PH21) */
> > > +             pinctrl-names = "default";
> > > +             pinctrl-0 = <&ts_reset_pin>;
> > > +             irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
> >
> > It seems odd that you need both irq-gpios and interrupts. These two
> > are completely redundant, and you should even actually use only one in
> > your driver, since the second request_irq will fail.
> >
> >
> We need both interrupts and irq-gpios because the driver uses the interrupt
> gpio pin as output to reset the device. See bindings documentation [1]
> 
> [1]
> https://git.kernel.org/cgit/linux/kernel/git/dtor/input.git/tree/Documentation/devicetree/bindings/input/touchscreen/goodix.txt?h=goodix

Hmm, indeed, and even the documentation is confusing.

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151221/d7bf2b64/attachment-0001.sig>

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 1/4] ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet
  2015-12-18  8:51 ` [PATCH 1/4] ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet Aleksei Mamlin
  2015-12-18 21:25   ` Maxime Ripard
@ 2015-12-21 15:44   ` Maxime Ripard
  1 sibling, 0 replies; 12+ messages in thread
From: Maxime Ripard @ 2015-12-21 15:44 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Dec 18, 2015 at 11:51:50AM +0300, Aleksei Mamlin wrote:
> Add a node for the Goodix GT911 touchscreen found on the Wexler TAB7200 tablet
> 
> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151221/57134f80/attachment.sig>

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 2/4] ARM: dts: sun7i: Enable PWM controller on Wexler TAB7200 tablet
  2015-12-18  8:49 [PATCH 0/4] ARM: dts: sun7i: Devicetree improvements for the Wexler TAB7200 Aleksei Mamlin
  2015-12-18  8:51 ` [PATCH 1/4] ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet Aleksei Mamlin
@ 2015-12-18  8:52 ` Aleksei Mamlin
  2015-12-18 21:25   ` Maxime Ripard
  2015-12-18  8:52 ` [PATCH 3/4] ARM: dts: sun7i: Add backlight node to " Aleksei Mamlin
  2015-12-18  8:52 ` [PATCH 4/4] ARM: dts: sun7i: Add PA gpio pin " Aleksei Mamlin
  3 siblings, 1 reply; 12+ messages in thread
From: Aleksei Mamlin @ 2015-12-18  8:52 UTC (permalink / raw)
  To: linux-arm-kernel

Wexler TAB7200 tablet use channel 0 of the PWM controller for backlight dimming

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
---
 arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
index ec3b837..1dc9079 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -173,6 +173,12 @@
 	};
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
-- 
2.4.10

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH 2/4] ARM: dts: sun7i: Enable PWM controller on Wexler TAB7200 tablet
  2015-12-18  8:52 ` [PATCH 2/4] ARM: dts: sun7i: Enable PWM controller " Aleksei Mamlin
@ 2015-12-18 21:25   ` Maxime Ripard
  0 siblings, 0 replies; 12+ messages in thread
From: Maxime Ripard @ 2015-12-18 21:25 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Dec 18, 2015 at 11:52:08AM +0300, Aleksei Mamlin wrote:
> Wexler TAB7200 tablet use channel 0 of the PWM controller for backlight dimming
> 
> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>

Applied, thanks!

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151218/74ae10f1/attachment.sig>

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 3/4] ARM: dts: sun7i: Add backlight node to Wexler TAB7200 tablet
  2015-12-18  8:49 [PATCH 0/4] ARM: dts: sun7i: Devicetree improvements for the Wexler TAB7200 Aleksei Mamlin
  2015-12-18  8:51 ` [PATCH 1/4] ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet Aleksei Mamlin
  2015-12-18  8:52 ` [PATCH 2/4] ARM: dts: sun7i: Enable PWM controller " Aleksei Mamlin
@ 2015-12-18  8:52 ` Aleksei Mamlin
  2015-12-18 21:27   ` Maxime Ripard
  2015-12-21 15:45   ` Maxime Ripard
  2015-12-18  8:52 ` [PATCH 4/4] ARM: dts: sun7i: Add PA gpio pin " Aleksei Mamlin
  3 siblings, 2 replies; 12+ messages in thread
From: Aleksei Mamlin @ 2015-12-18  8:52 UTC (permalink / raw)
  To: linux-arm-kernel

Add a backlight for controlling the lcd panel backlight on Wexler TAB7200 tablet

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
---
 arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
index 1dc9079..f47e5f1 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -48,6 +48,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Wexler TAB7200";
@@ -57,6 +58,16 @@
 		serial0 = &uart0;
 	};
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_enable_pin>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -158,6 +169,13 @@
 };
 
 &pio {
+	bl_enable_pin: bl_enable_pin at 0 {
+		allwinner,pins = "PH7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	ts_reset_pin: ts_reset_pin at 0 {
 		allwinner,pins = "PB13";
 		allwinner,function = "gpio_out";
-- 
2.4.10

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH 3/4] ARM: dts: sun7i: Add backlight node to Wexler TAB7200 tablet
  2015-12-18  8:52 ` [PATCH 3/4] ARM: dts: sun7i: Add backlight node to " Aleksei Mamlin
@ 2015-12-18 21:27   ` Maxime Ripard
  2015-12-21 15:45   ` Maxime Ripard
  1 sibling, 0 replies; 12+ messages in thread
From: Maxime Ripard @ 2015-12-18 21:27 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Dec 18, 2015 at 11:52:22AM +0300, Aleksei Mamlin wrote:
> Add a backlight for controlling the lcd panel backlight on Wexler TAB7200 tablet
> 
> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>

This one doesn't apply (probably because of some dependency on the
first patch).

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151218/0c2e7a50/attachment.sig>

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 3/4] ARM: dts: sun7i: Add backlight node to Wexler TAB7200 tablet
  2015-12-18  8:52 ` [PATCH 3/4] ARM: dts: sun7i: Add backlight node to " Aleksei Mamlin
  2015-12-18 21:27   ` Maxime Ripard
@ 2015-12-21 15:45   ` Maxime Ripard
  1 sibling, 0 replies; 12+ messages in thread
From: Maxime Ripard @ 2015-12-21 15:45 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Dec 18, 2015 at 11:52:22AM +0300, Aleksei Mamlin wrote:
> Add a backlight for controlling the lcd panel backlight on Wexler TAB7200 tablet
> 
> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151221/ee535b3b/attachment.sig>

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 4/4] ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet
  2015-12-18  8:49 [PATCH 0/4] ARM: dts: sun7i: Devicetree improvements for the Wexler TAB7200 Aleksei Mamlin
                   ` (2 preceding siblings ...)
  2015-12-18  8:52 ` [PATCH 3/4] ARM: dts: sun7i: Add backlight node to " Aleksei Mamlin
@ 2015-12-18  8:52 ` Aleksei Mamlin
  2015-12-21 15:45   ` Maxime Ripard
  3 siblings, 1 reply; 12+ messages in thread
From: Aleksei Mamlin @ 2015-12-18  8:52 UTC (permalink / raw)
  To: linux-arm-kernel

Add PA gpio pin for controlling power of two external amplifiers (NS4890) which are used on the Wexler TAB7200 tablet

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
---
 arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
index f47e5f1..2f6b21a 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -74,6 +74,9 @@
 };
 
 &codec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&codec_pa_pin>;
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
 	status = "okay";
 };
 
@@ -176,6 +179,13 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	codec_pa_pin: codec_pa_pin at 0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	ts_reset_pin: ts_reset_pin at 0 {
 		allwinner,pins = "PB13";
 		allwinner,function = "gpio_out";
-- 
2.4.10

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH 4/4] ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet
  2015-12-18  8:52 ` [PATCH 4/4] ARM: dts: sun7i: Add PA gpio pin " Aleksei Mamlin
@ 2015-12-21 15:45   ` Maxime Ripard
  0 siblings, 0 replies; 12+ messages in thread
From: Maxime Ripard @ 2015-12-21 15:45 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Dec 18, 2015 at 11:52:45AM +0300, Aleksei Mamlin wrote:
> Add PA gpio pin for controlling power of two external amplifiers (NS4890) which are used on the Wexler TAB7200 tablet
> 
> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151221/98cbe149/attachment.sig>

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2015-12-21 15:45 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-12-18  8:49 [PATCH 0/4] ARM: dts: sun7i: Devicetree improvements for the Wexler TAB7200 Aleksei Mamlin
2015-12-18  8:51 ` [PATCH 1/4] ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet Aleksei Mamlin
2015-12-18 21:25   ` Maxime Ripard
     [not found]     ` <CAF==cZWcY=FH9Sr8RY4j4Ob8iuiYrBGkajZDWpNQzS-t4d074Q@mail.gmail.com>
2015-12-21 15:43       ` Maxime Ripard
2015-12-21 15:44   ` Maxime Ripard
2015-12-18  8:52 ` [PATCH 2/4] ARM: dts: sun7i: Enable PWM controller " Aleksei Mamlin
2015-12-18 21:25   ` Maxime Ripard
2015-12-18  8:52 ` [PATCH 3/4] ARM: dts: sun7i: Add backlight node to " Aleksei Mamlin
2015-12-18 21:27   ` Maxime Ripard
2015-12-21 15:45   ` Maxime Ripard
2015-12-18  8:52 ` [PATCH 4/4] ARM: dts: sun7i: Add PA gpio pin " Aleksei Mamlin
2015-12-21 15:45   ` Maxime Ripard

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).