linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 69/69] clocksource/drivers/h8300: Use ioread / iowrite
Date: Fri, 18 Dec 2015 15:18:22 +0100	[thread overview]
Message-ID: <1450448302-27429-69-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1450448302-27429-1-git-send-email-daniel.lezcano@linaro.org>

From: Yoshinori Sato <ysato@users.sourceforge.jp>

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/h8300_timer16.c | 43 ++++++++++++++++++-------------------
 drivers/clocksource/h8300_timer8.c  | 28 ++++++++++++++----------
 drivers/clocksource/h8300_tpu.c     | 22 ++++++++++---------
 3 files changed, 50 insertions(+), 43 deletions(-)

diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
index 934ed0b..75c4407 100644
--- a/drivers/clocksource/h8300_timer16.c
+++ b/drivers/clocksource/h8300_timer16.c
@@ -19,6 +19,9 @@
 #define TCR	0
 #define TCNT	2
 
+#define bset(b, a) iowrite8(ioread8(a) | (1 << (b)), (a))
+#define bclr(b, a) iowrite8(ioread8(a) & ~(1 << (b)), (a))
+
 struct timer16_priv {
 	struct clocksource cs;
 	unsigned long total_cycles;
@@ -28,23 +31,22 @@ struct timer16_priv {
 	unsigned char enb;
 	unsigned char ovf;
 	unsigned char ovie;
-	struct clk *clk;
 };
 
 static unsigned long timer16_get_counter(struct timer16_priv *p)
 {
-	unsigned long v1, v2, v3;
-	int o1, o2;
+	unsigned short v1, v2, v3;
+	unsigned char  o1, o2;
 
-	o1 = readb(p->mapcommon + TISRC) & p->ovf;
+	o1 = ioread8(p->mapcommon + TISRC) & p->ovf;
 
 	/* Make sure the timer value is stable. Stolen from acpi_pm.c */
 	do {
 		o2 = o1;
-		v1 = readw(p->mapbase + TCNT);
-		v2 = readw(p->mapbase + TCNT);
-		v3 = readw(p->mapbase + TCNT);
-		o1 = readb(p->mapcommon + TISRC) & p->ovf;
+		v1 = ioread16be(p->mapbase + TCNT);
+		v2 = ioread16be(p->mapbase + TCNT);
+		v3 = ioread16be(p->mapbase + TCNT);
+		o1 = ioread8(p->mapcommon + TISRC) & p->ovf;
 	} while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
 			  || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
 
@@ -59,8 +61,7 @@ static irqreturn_t timer16_interrupt(int irq, void *dev_id)
 {
 	struct timer16_priv *p = (struct timer16_priv *)dev_id;
 
-	writeb(readb(p->mapcommon + TISRC) & ~p->ovf,
-		  p->mapcommon + TISRC);
+	bclr(p->ovf, p->mapcommon + TISRC);
 	p->total_cycles += 0x10000;
 
 	return IRQ_HANDLED;
@@ -89,12 +90,10 @@ static int timer16_enable(struct clocksource *cs)
 	WARN_ON(p->cs_enabled);
 
 	p->total_cycles = 0;
-	writew(0x0000, p->mapbase + TCNT);
-	writeb(0x83, p->mapbase + TCR);
-	writeb(readb(p->mapcommon + TSTR) | p->enb,
-		  p->mapcommon + TSTR);
-	writeb(readb(p->mapcommon + TISRC) | p->ovie,
-		  p->mapcommon + TSTR);
+	iowrite16be(0x0000, p->mapbase + TCNT);
+	iowrite8(0x83, p->mapbase + TCR);
+	bset(p->ovie, p->mapcommon + TISRC);
+	bset(p->enb, p->mapcommon + TSTR);
 
 	p->cs_enabled = true;
 	return 0;
@@ -106,8 +105,8 @@ static void timer16_disable(struct clocksource *cs)
 
 	WARN_ON(!p->cs_enabled);
 
-	writeb(readb(p->mapcommon + TSTR) & ~p->enb,
-		  p->mapcommon + TSTR);
+	bclr(p->ovie, p->mapcommon + TISRC);
+	bclr(p->enb, p->mapcommon + TSTR);
 
 	p->cs_enabled = false;
 }
@@ -162,9 +161,9 @@ static void __init h8300_16timer_init(struct device_node *node)
 
 	timer16_priv.mapbase = base[REG_CH];
 	timer16_priv.mapcommon = base[REG_COMM];
-	timer16_priv.enb = 1 << ch;
-	timer16_priv.ovf = 1 << ch;
-	timer16_priv.ovie = 1 << (4 + ch);
+	timer16_priv.enb = ch;
+	timer16_priv.ovf = ch;
+	timer16_priv.ovie = 4 + ch;
 
 	ret = request_irq(irq, timer16_interrupt,
 			  IRQF_TIMER, timer16_priv.cs.name, &timer16_priv);
@@ -174,7 +173,7 @@ static void __init h8300_16timer_init(struct device_node *node)
 	}
 
 	clocksource_register_hz(&timer16_priv.cs,
-				clk_get_rate(timer16_priv.clk) / 8);
+				clk_get_rate(clk) / 8);
 	return;
 
 unmap_comm:
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index 9087dd2..c151941 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -24,10 +24,16 @@
 #define TCORB	6
 #define _8TCNT	8
 
+#define CMIEA	6
+#define CMFA	6
+
 #define FLAG_STARTED (1 << 3)
 
 #define SCALE 64
 
+#define bset(b, a) iowrite8(ioread8(a) | (1 << (b)), (a))
+#define bclr(b, a) iowrite8(ioread8(a) & ~(1 << (b)), (a))
+
 struct timer8_priv {
 	struct clock_event_device ced;
 	void __iomem *mapbase;
@@ -40,12 +46,11 @@ static irqreturn_t timer8_interrupt(int irq, void *dev_id)
 	struct timer8_priv *p = dev_id;
 
 	if (clockevent_state_oneshot(&p->ced))
-		writew(0x0000, p->mapbase + _8TCR);
+		iowrite16be(0x0000, p->mapbase + _8TCR);
 
 	p->ced.event_handler(&p->ced);
 
-	writeb(readb(p->mapbase + _8TCSR) & ~0x40,
-		  p->mapbase + _8TCSR);
+	bclr(CMFA, p->mapbase + _8TCSR);
 
 	return IRQ_HANDLED;
 }
@@ -54,17 +59,18 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
 {
 	if (delta >= 0x10000)
 		pr_warn("delta out of range\n");
-	writeb(readb(p->mapbase + _8TCR) & ~0x40, p->mapbase + _8TCR);
-	writew(0, p->mapbase + _8TCNT);
-	writew(delta, p->mapbase + TCORA);
-	writeb(readb(p->mapbase + _8TCR) | 0x40, p->mapbase + _8TCR);
+	bclr(CMIEA, p->mapbase + _8TCR);
+	iowrite16be(delta, p->mapbase + TCORA);
+	iowrite16be(0x0000, p->mapbase + _8TCNT);
+	bclr(CMFA, p->mapbase + _8TCSR);
+	bset(CMIEA, p->mapbase + _8TCR);
 }
 
 static int timer8_enable(struct timer8_priv *p)
 {
-	writew(0xffff, p->mapbase + TCORA);
-	writew(0x0000, p->mapbase + _8TCNT);
-	writew(0x0c02, p->mapbase + _8TCR);
+	iowrite16be(0xffff, p->mapbase + TCORA);
+	iowrite16be(0x0000, p->mapbase + _8TCNT);
+	iowrite16be(0x0c02, p->mapbase + _8TCR);
 
 	return 0;
 }
@@ -85,7 +91,7 @@ static int timer8_start(struct timer8_priv *p)
 
 static void timer8_stop(struct timer8_priv *p)
 {
-	writew(0x0000, p->mapbase + _8TCR);
+	iowrite16be(0x0000, p->mapbase + _8TCR);
 }
 
 static inline struct timer8_priv *ced_to_priv(struct clock_event_device *ced)
diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
index 91bf1992..d4c1a28 100644
--- a/drivers/clocksource/h8300_tpu.c
+++ b/drivers/clocksource/h8300_tpu.c
@@ -19,6 +19,8 @@
 #define TSR	0x5
 #define TCNT	0x6
 
+#define TCFV	0x10
+
 struct tpu_priv {
 	struct clocksource cs;
 	void __iomem *mapbase1;
@@ -31,8 +33,8 @@ static inline unsigned long read_tcnt32(struct tpu_priv *p)
 {
 	unsigned long tcnt;
 
-	tcnt = readw(p->mapbase1 + TCNT) << 16;
-	tcnt |= readw(p->mapbase2 + TCNT);
+	tcnt = ioread16be(p->mapbase1 + TCNT) << 16;
+	tcnt |= ioread16be(p->mapbase2 + TCNT);
 	return tcnt;
 }
 
@@ -41,7 +43,7 @@ static int tpu_get_counter(struct tpu_priv *p, unsigned long long *val)
 	unsigned long v1, v2, v3;
 	int o1, o2;
 
-	o1 = readb(p->mapbase1 + TSR) & 0x10;
+	o1 = ioread8(p->mapbase1 + TSR) & TCFV;
 
 	/* Make sure the timer value is stable. Stolen from acpi_pm.c */
 	do {
@@ -49,7 +51,7 @@ static int tpu_get_counter(struct tpu_priv *p, unsigned long long *val)
 		v1 = read_tcnt32(p);
 		v2 = read_tcnt32(p);
 		v3 = read_tcnt32(p);
-		o1 = readb(p->mapbase1 + TSR) & 0x10;
+		o1 = ioread8(p->mapbase1 + TSR) & TCFV;
 	} while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
 			  || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
 
@@ -82,10 +84,10 @@ static int tpu_clocksource_enable(struct clocksource *cs)
 
 	WARN_ON(p->cs_enabled);
 
-	writew(0, p->mapbase1 + TCNT);
-	writew(0, p->mapbase2 + TCNT);
-	writeb(0x0f, p->mapbase1 + TCR);
-	writeb(0x03, p->mapbase2 + TCR);
+	iowrite16be(0, p->mapbase1 + TCNT);
+	iowrite16be(0, p->mapbase2 + TCNT);
+	iowrite8(0x0f, p->mapbase1 + TCR);
+	iowrite8(0x03, p->mapbase2 + TCR);
 
 	p->cs_enabled = true;
 	return 0;
@@ -97,8 +99,8 @@ static void tpu_clocksource_disable(struct clocksource *cs)
 
 	WARN_ON(!p->cs_enabled);
 
-	writeb(0, p->mapbase1 + TCR);
-	writeb(0, p->mapbase2 + TCR);
+	iowrite8(0, p->mapbase1 + TCR);
+	iowrite8(0, p->mapbase2 + TCR);
 	p->cs_enabled = false;
 }
 
-- 
1.9.1

      parent reply	other threads:[~2015-12-18 14:18 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-17 14:50 [GIT PULL] clockevents for 4.5 Daniel Lezcano
2015-12-18 14:17 ` [PATCH 01/69] clocksource/drivers/mtk_timer: Add pr_fmt define Daniel Lezcano
2015-12-18 14:17   ` [PATCH 02/69] clocksource/drivers/mtk_timer: Fix pr_warn() messages in mtk_timer_init Daniel Lezcano
2015-12-30 18:15     ` Matthias Brugger
2015-12-18 14:17   ` [PATCH 03/69] clocksource/drivers/mtk_timer: Fix memleak in mtk_timer_init() Daniel Lezcano
2015-12-18 14:17   ` [PATCH 04/69] clocksource/drivers/tegra: Allow timer irq affinity change Daniel Lezcano
2015-12-18 14:17   ` [PATCH 05/69] clocksource/drivers/rockchip: Make the driver more readable Daniel Lezcano
2015-12-18 14:17   ` [PATCH 06/69] time: Define dummy functions for the generic sched clock Daniel Lezcano
2015-12-18 14:17   ` [PATCH 07/69] clocksource/drivers/rockchip: Remove dsb() usage Daniel Lezcano
2015-12-18 14:17   ` [PATCH 08/69] clocksource/drivers/qcom: Make COMPILE_TEST enabled for ARM architecture Daniel Lezcano
2015-12-18 14:17   ` [PATCH 09/69] clocksource/drivers/st_lpc: Fix Kconfig dependency Daniel Lezcano
2015-12-18 14:17   ` [PATCH 10/69] clocksource/drivers/st_lpc: Add the COMPILE_TEST option Daniel Lezcano
2015-12-18 14:17   ` [PATCH 11/69] clocksource/drivers/pxa_timer: Move the Kconfig rule Daniel Lezcano
2015-12-18 14:17   ` [PATCH 12/69] clocksource/drivers/pxa_timer: Add the COMPILE_TEST option Daniel Lezcano
2015-12-18 14:17   ` [PATCH 13/69] clocksource/drivers/tango: Add " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 14/69] clocksource/drivers/pistachio: Add the " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 15/69] clocksource/drivers/mediatek: " Daniel Lezcano
2015-12-30 18:16     ` Matthias Brugger
2015-12-18 14:17   ` [PATCH 16/69] clocksource/drivers/rockchip: Add " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 17/69] clocksource/drivers/armada-370-xp: Add the " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 18/69] clocksource/drivers/meson6: " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 19/69] clocksource/drivers/orion: " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 20/69] clocksource/drivers/digicolor: " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 21/69] clocksource/drivers/dw_apb: " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 22/69] clocksource/drivers/sun4i: " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 23/69] clocksource/drivers/sun5i: " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 24/69] clocksource/drivers/tegra2: " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 25/69] clocksource/drivers/vt8500: Remove unneeded header Daniel Lezcano
2015-12-18 14:17   ` [PATCH 26/69] clocksource/drivers/vt8500: Add the COMPILE_TEST option Daniel Lezcano
2015-12-18 14:17   ` [PATCH 27/69] clocksource/drivers/cadence_ttc: " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 28/69] clocksource/drivers/asm9260: " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 29/69] clocksource/drivers/lpc32xx: " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 30/69] clocksource/drivers/nomadik_mtu: " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 31/69] clocksource/drivers/prcmu: Fix Kconfig and add " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 32/69] clocksource/drivers/exynos_mct: " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 33/69] clocksource/drivers/samsung-pwm: Add the " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 34/69] clocksource/drivers/fsl-ftm: " Daniel Lezcano
2015-12-18 14:17   ` [PATCH 35/69] clocksource/drivers/Kconfig: Add missing GENERIC_CLOCKEVENTS dependency Daniel Lezcano
2015-12-18 14:17   ` [PATCH 36/69] clocksource/drivers/dw_apb_timer_of: Implement ARM delay timer Daniel Lezcano
2015-12-18 14:17   ` [PATCH 37/69] clocksource/drivers/h8300: Cleanup startup and remove module code Daniel Lezcano
2015-12-18 14:17   ` [PATCH 38/69] clocksource/drivers/h8300_timer8: Fix compilation error with dev_warn Daniel Lezcano
2015-12-18 14:17   ` [PATCH 39/69] clocksource/drivers/h8300_tpu: Remove unused macros Daniel Lezcano
2015-12-18 14:17   ` [PATCH 40/69] clocksource/drivers/h8300_tpu: Remove pointless headers for TPU Daniel Lezcano
2015-12-18 14:17   ` [PATCH 41/69] clocksource/drivers/h8300_timer8: Remove unused headers Daniel Lezcano
2015-12-18 14:17   ` [PATCH 42/69] clocksource/drivers/h8300_timer8: Remove unused macros Daniel Lezcano
2015-12-18 14:17   ` [PATCH 43/69] clocksource/drivers/h8300_timer8: Remove PERIODIC and ONESHOT macro Daniel Lezcano
2015-12-18 14:17   ` [PATCH 44/69] clocksource/drivers/h8300_timer8: Fix irq return value check Daniel Lezcano
2015-12-18 14:17   ` [PATCH 45/69] clocksource/drivers/h8300_timer8: Remove pointless irq re-entrant safe code Daniel Lezcano
2015-12-18 14:17   ` [PATCH 46/69] clocksource/drivers/h8300_timer8: Remove irq and lock legacy code Daniel Lezcano
2015-12-18 14:18   ` [PATCH 47/69] clocksource/drivers/h8300_timer8: Retrieve the clock rate at init time Daniel Lezcano
2015-12-18 14:18   ` [PATCH 48/69] clocksource/drivers/h8300_timer16: Remove pointless headers Daniel Lezcano
2015-12-18 14:18   ` [PATCH 49/69] clocksource/drivers/h8300_timer16: Remove unused macros Daniel Lezcano
2015-12-18 14:18   ` [PATCH 50/69] clocksource/drivers/h8300_timer16: Remove unused fields in timer16_priv Daniel Lezcano
2015-12-18 14:18   ` [PATCH 51/69] clocksource/drivers/h8300_timer16: Fix irq return value check Daniel Lezcano
2015-12-18 14:18   ` [PATCH 52/69] clocksource/drivers/h8300_timer16: Remove pointless lock Daniel Lezcano
2015-12-18 14:18   ` [PATCH 53/69] clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init Daniel Lezcano
2015-12-18 14:18   ` [PATCH 54/69] clocksource/drivers/h8300_timer8: Separate the Kconfig option from the arch Daniel Lezcano
2015-12-18 14:18   ` [PATCH 55/69] h8300: Rename ctlr_out/in[bwl] to raw_read/write[bwl] Daniel Lezcano
2015-12-18 14:18   ` [PATCH 56/69] clocksource/drivers/h8300: Increase the compilation test coverage Daniel Lezcano
2015-12-18 14:18   ` [PATCH 57/69] clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init Daniel Lezcano
2015-12-18 14:18   ` [PATCH 58/69] clocksource/drivers/dw_apb_timer: Fix apbt_readl return types Daniel Lezcano
2015-12-18 14:18   ` [PATCH 59/69] clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path Daniel Lezcano
2015-12-18 14:18   ` [PATCH 60/69] clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writel Daniel Lezcano
2015-12-18 14:18   ` [PATCH 61/69] clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_set Daniel Lezcano
2015-12-18 14:18   ` [PATCH 62/69] clocksource/drivers/pistachio: Fix wrong calculated clocksource read value Daniel Lezcano
2015-12-18 14:18   ` [PATCH 63/69] clocksource/drivers/arm_global_timer: Fix suspend resume Daniel Lezcano
2015-12-18 14:18   ` [PATCH 64/69] clocksource/drivers/lpc32: Correct pr_err() output format Daniel Lezcano
2015-12-18 14:18   ` [PATCH 65/69] clocksource/drivers/h8300: Change to overflow interrupt Daniel Lezcano
2015-12-18 14:18   ` [PATCH 66/69] clocksource/drivers/h8300: Fix timer not overflow case Daniel Lezcano
2015-12-18 14:18   ` [PATCH 67/69] clocksource/drivers/h8300: Simplify delta handling Daniel Lezcano
2015-12-18 14:18   ` [PATCH 68/69] clocksource/drivers/h8300: Initializer cleanup Daniel Lezcano
2015-12-18 14:18   ` Daniel Lezcano [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450448302-27429-69-git-send-email-daniel.lezcano@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).