From mboxrd@z Thu Jan 1 00:00:00 1970 From: jonmason@broadcom.com (Jon Mason) Date: Fri, 18 Dec 2015 16:37:55 -0500 Subject: [PATCH 2/3] ARM: dts: bcm5301x: Add I2C support to the DT In-Reply-To: <1450474676-10210-1-git-send-email-jonmason@broadcom.com> References: <1450474676-10210-1-git-send-email-jonmason@broadcom.com> Message-ID: <1450474676-10210-2-git-send-email-jonmason@broadcom.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add I2C support to the bcm5301x Device Tree. Since no driver changes are needed to enable this hardware, only the device tree changes are required to make this functional. Signed-off-by: Jon Mason --- arch/arm/boot/dts/bcm5301x.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index c31fafe..553b2ec 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -218,6 +218,15 @@ }; }; + i2c0: i2c at 18009000 { + compatible = "brcm,iproc-i2c"; + reg = <0x18009000 0x50>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + }; + lcpll0: lcpll0 at 1800c100 { #clock-cells = <1>; compatible = "brcm,nsp-lcpll0"; -- 1.9.1