public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: zhengxing@rock-chips.com (Xing Zheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH v1 4/4] ARM: dts: rockchip: Add support emac for RK3036
Date: Mon, 28 Dec 2015 15:22:21 +0800	[thread overview]
Message-ID: <1451287341-16453-5-git-send-email-zhengxing@rock-chips.com> (raw)
In-Reply-To: <1451287341-16453-1-git-send-email-zhengxing@rock-chips.com>

This patch describe the emac, and we need to let mac clock under
the APLL which is able to provide the accurate 50MHz what mac_ref
need.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---

 arch/arm/boot/dts/rk3036-evb.dts   |   25 +++++++++++++++++++++++++
 arch/arm/boot/dts/rk3036-kylin.dts |   23 +++++++++++++++++++++++
 arch/arm/boot/dts/rk3036.dtsi      |   32 ++++++++++++++++++++++++++++++++
 3 files changed, 80 insertions(+)

diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 28a0336..69b96e6 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -62,3 +62,28 @@
 &uart2 {
 	status = "okay";
 };
+
+&emac {
+	assigned-clocks = <&cru SCLK_MACPLL>;
+	assigned-clock-parents = <&cru PLL_APLL>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
+	phy = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy at 0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	emac {
+		rmii_rst: rmii-rst {
+			rockchip,pins = <2 22 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 992f9ca..3fb1cfe 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -285,7 +285,24 @@
 	status = "okay";
 };
 
+&emac {
+	assigned-clocks = <&cru SCLK_MACPLL>;
+	assigned-clock-parents = <&cru PLL_APLL>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
+	phy = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy at 0 {
+		reg = <0>;
+	};
+};
+
 &pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
@@ -297,4 +314,10 @@
 			rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
 		};
 	};
+
+	emac {
+		rmii_rst: rmii-rst {
+			rockchip,pins = <2 22 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index b9567c1..0c09fb3 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -186,6 +186,20 @@
 		status = "disabled";
 	};
 
+	emac: ethernet at 10200000 {
+		compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+		reg = <0x10200000 0x4000>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rockchip,grf = <&grf>;
+		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
+		clock-names = "hclk", "macref", "macclk";
+		max-speed = <100>;
+		phy-mode = "rmii";
+		status = "disabled";
+	};
+
 	sdmmc: dwmmc at 10214000 {
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10214000 0x4000>;
@@ -556,6 +570,24 @@
 			};
 		};
 
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_none>, /* crs_dvalid */
+						<2 13 RK_FUNC_1 &pcfg_pull_none>, /* tx_en */
+						<2 14 RK_FUNC_1 &pcfg_pull_none>, /* mac_clk */
+						<2 15 RK_FUNC_1 &pcfg_pull_none>, /* rx_err */
+						<2 16 RK_FUNC_1 &pcfg_pull_none>, /* rxd1 */
+						<2 17 RK_FUNC_1 &pcfg_pull_none>, /* rxd0 */
+						<2 18 RK_FUNC_1 &pcfg_pull_none>, /* txd1 */
+						<2 19 RK_FUNC_1 &pcfg_pull_none>; /* txd0 */
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_none>, /* mac_md */
+						<2 25 RK_FUNC_1 &pcfg_pull_none>; /* mac_mdclk */
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
-- 
1.7.9.5

  parent reply	other threads:[~2015-12-28  7:22 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-28  7:22 [RESEND PATCH v1 0/4] Add support emac for the RK3036 SoC platform Xing Zheng
2015-12-28  7:22 ` [RESEND PATCH v1 1/4] net: ethernet: arc: Probe emac after set RMII clock Xing Zheng
2015-12-28  7:22 ` [RESEND PATCH v1 2/4] net: ethernet: arc: Keep emac compatibility for more Rockchip SoCs Xing Zheng
2015-12-28  7:22 ` [RESEND PATCH v1 3/4] net: ethernet: arc: Add support emac for RK3036 Xing Zheng
2015-12-29 22:59   ` Florian Fainelli
2015-12-29 23:32     ` Heiko Stübner
2016-01-01 12:55     ` Arnd Bergmann
2016-01-02  2:38       ` Xing Zheng
2015-12-28  7:22 ` Xing Zheng [this message]
2015-12-29 20:53 ` [RESEND PATCH v1 0/4] Add support emac for the RK3036 SoC platform David Miller
2015-12-29 22:27   ` Heiko Stübner
2015-12-29 22:56     ` Florian Fainelli
2015-12-30  1:48     ` David Miller
2015-12-30 10:17       ` Geert Uytterhoeven
2015-12-30 15:03         ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1451287341-16453-5-git-send-email-zhengxing@rock-chips.com \
    --to=zhengxing@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox