From: mst@redhat.com (Michael S. Tsirkin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 33/41] virtio_ring: use virt_store_mb
Date: Sun, 10 Jan 2016 16:21:07 +0200 [thread overview]
Message-ID: <1452426622-4471-34-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1452426622-4471-1-git-send-email-mst@redhat.com>
We need a full barrier after writing out event index, using
virt_store_mb there seems better than open-coding. As usual, we need a
wrapper to account for strong barriers.
It's tempting to use this in vhost as well, for that, we'll
need a variant of smp_store_mb that works on __user pointers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/linux/virtio_ring.h | 11 +++++++++++
drivers/virtio/virtio_ring.c | 15 +++++++++------
2 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index f3fa55b..a156e2b 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -45,6 +45,17 @@ static inline void virtio_wmb(bool weak_barriers)
wmb();
}
+static inline void virtio_store_mb(bool weak_barriers,
+ __virtio16 *p, __virtio16 v)
+{
+ if (weak_barriers) {
+ virt_store_mb(*p, v);
+ } else {
+ WRITE_ONCE(*p, v);
+ mb();
+ }
+}
+
struct virtio_device;
struct virtqueue;
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index ee663c4..e12e385 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -517,10 +517,10 @@ void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len)
/* If we expect an interrupt for the next entry, tell host
* by writing event index and flush out the write before
* the read in the next get_buf call. */
- if (!(vq->avail_flags_shadow & VRING_AVAIL_F_NO_INTERRUPT)) {
- vring_used_event(&vq->vring) = cpu_to_virtio16(_vq->vdev, vq->last_used_idx);
- virtio_mb(vq->weak_barriers);
- }
+ if (!(vq->avail_flags_shadow & VRING_AVAIL_F_NO_INTERRUPT))
+ virtio_store_mb(vq->weak_barriers,
+ &vring_used_event(&vq->vring),
+ cpu_to_virtio16(_vq->vdev, vq->last_used_idx));
#ifdef DEBUG
vq->last_add_time_valid = false;
@@ -653,8 +653,11 @@ bool virtqueue_enable_cb_delayed(struct virtqueue *_vq)
}
/* TODO: tune this threshold */
bufs = (u16)(vq->avail_idx_shadow - vq->last_used_idx) * 3 / 4;
- vring_used_event(&vq->vring) = cpu_to_virtio16(_vq->vdev, vq->last_used_idx + bufs);
- virtio_mb(vq->weak_barriers);
+
+ virtio_store_mb(vq->weak_barriers,
+ &vring_used_event(&vq->vring),
+ cpu_to_virtio16(_vq->vdev, vq->last_used_idx + bufs));
+
if (unlikely((u16)(virtio16_to_cpu(_vq->vdev, vq->vring.used->idx) - vq->last_used_idx) > bufs)) {
END_USE(vq);
return false;
--
MST
next prev parent reply other threads:[~2016-01-10 14:21 UTC|newest]
Thread overview: 153+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-10 14:16 [PATCH v3 00/41] arch: barrier cleanup + barriers for virt Michael S. Tsirkin
2016-01-10 14:16 ` [PATCH v3 01/41] lcoking/barriers, arch: Use smp barriers in smp_store_release() Michael S. Tsirkin
2016-01-12 16:28 ` Paul E. McKenney
2016-01-12 18:40 ` Michael S. Tsirkin
2016-01-10 14:16 ` [PATCH v3 02/41] asm-generic: guard smp_store_release/load_acquire Michael S. Tsirkin
2016-01-10 14:16 ` [PATCH v3 03/41] ia64: rename nop->iosapic_nop Michael S. Tsirkin
2016-01-10 14:17 ` [PATCH v3 04/41] ia64: reuse asm-generic/barrier.h Michael S. Tsirkin
2016-01-10 14:17 ` [PATCH v3 05/41] powerpc: " Michael S. Tsirkin
2016-01-12 16:31 ` Paul E. McKenney
2016-01-10 14:17 ` [PATCH v3 06/41] s390: " Michael S. Tsirkin
2016-01-10 14:17 ` [PATCH v3 07/41] sparc: " Michael S. Tsirkin
2016-01-10 14:17 ` [PATCH v3 08/41] arm: " Michael S. Tsirkin
2016-01-10 14:17 ` [PATCH v3 09/41] arm64: " Michael S. Tsirkin
2016-01-10 14:17 ` [PATCH v3 10/41] metag: " Michael S. Tsirkin
2016-01-10 14:18 ` [PATCH v3 11/41] mips: " Michael S. Tsirkin
2016-01-12 1:14 ` [v3,11/41] " Leonid Yegoshin
2016-01-12 8:43 ` Michael S. Tsirkin
2016-01-12 9:51 ` Peter Zijlstra
2016-01-12 9:27 ` Peter Zijlstra
2016-01-12 10:25 ` Peter Zijlstra
2016-01-12 10:40 ` Peter Zijlstra
2016-01-12 11:41 ` Will Deacon
2016-01-12 20:45 ` Leonid Yegoshin
2016-01-12 21:40 ` Peter Zijlstra
2016-01-13 0:21 ` Leonid Yegoshin
2016-01-13 10:45 ` Will Deacon
2016-01-13 19:02 ` Leonid Yegoshin
2016-01-13 20:48 ` Peter Zijlstra
2016-01-13 20:58 ` Leonid Yegoshin
2016-01-14 12:04 ` Will Deacon
2016-01-14 16:16 ` Paul E. McKenney
2016-01-14 19:42 ` Leonid Yegoshin
2016-01-14 20:15 ` Peter Zijlstra
2016-01-14 20:36 ` Paul E. McKenney
2016-01-14 20:46 ` Peter Zijlstra
2016-01-14 20:46 ` Leonid Yegoshin
2016-01-14 21:34 ` Paul E. McKenney
2016-01-14 21:45 ` Leonid Yegoshin
2016-01-14 22:24 ` Paul E. McKenney
2016-01-14 23:04 ` Leonid Yegoshin
2016-01-14 20:12 ` Leonid Yegoshin
2016-01-14 20:48 ` Paul E. McKenney
2016-01-14 21:24 ` Leonid Yegoshin
2016-01-14 22:20 ` Paul E. McKenney
2016-01-15 9:57 ` Will Deacon
2016-01-15 18:54 ` Leonid Yegoshin
2016-01-26 10:24 ` Peter Zijlstra
2016-01-26 10:32 ` Peter Zijlstra
2016-01-26 11:09 ` Will Deacon
2016-01-26 20:11 ` Paul E. McKenney
2016-01-27 8:35 ` [PATCH] documentation: Add disclaimer Peter Zijlstra
2016-01-27 10:11 ` Will Deacon
2016-04-14 21:40 ` Paul E. McKenney
2016-01-27 14:57 ` David Howells
2016-01-27 23:35 ` Paul E. McKenney
2016-01-28 20:02 ` David Howells
2016-04-14 21:40 ` Paul E. McKenney
2016-01-26 19:44 ` [v3,11/41] mips: reuse asm-generic/barrier.h Paul E. McKenney
2016-01-18 8:19 ` Herbert Xu
2016-01-18 15:46 ` Paul E. McKenney
2016-01-26 16:52 ` Boqun Feng
2016-01-26 17:22 ` Peter Zijlstra
2016-01-26 19:44 ` Linus Torvalds
2016-01-26 20:10 ` Paul E. McKenney
2016-01-26 22:15 ` Linus Torvalds
2016-01-26 22:33 ` Linus Torvalds
2016-01-26 23:29 ` Paul E. McKenney
2016-01-26 23:45 ` Linus Torvalds
2016-01-27 0:57 ` Paul E. McKenney
2016-01-27 2:04 ` Boqun Feng
2016-01-27 23:30 ` Paul E. McKenney
2016-01-27 7:51 ` Peter Zijlstra
2016-01-26 19:51 ` Paul E. McKenney
2016-01-13 22:26 ` Leonid Yegoshin
2016-01-14 9:24 ` Michael S. Tsirkin
2016-01-14 12:14 ` Will Deacon
2016-01-14 19:28 ` Leonid Yegoshin
2016-01-14 20:34 ` Paul E. McKenney
2016-01-14 21:01 ` Leonid Yegoshin
2016-01-14 21:29 ` Paul E. McKenney
2016-01-14 21:36 ` Leonid Yegoshin
2016-01-14 22:55 ` Paul E. McKenney
2016-01-14 23:33 ` Leonid Yegoshin
2016-01-15 0:47 ` Paul E. McKenney
2016-01-15 1:07 ` Leonid Yegoshin
2016-01-27 11:26 ` Maciej W. Rozycki
2016-01-28 0:58 ` Leonid Yegoshin
[not found] ` <56A9656D.3080707@imgtec.com>
2016-01-29 13:38 ` Maciej W. Rozycki
2016-01-27 10:40 ` Ralf Baechle
2016-01-27 12:09 ` Maciej W. Rozycki
2016-01-15 10:24 ` Will Deacon
2016-01-15 17:54 ` Paul E. McKenney
2016-01-15 19:28 ` Paul E. McKenney
2016-01-25 14:41 ` Will Deacon
2016-01-26 1:06 ` Paul E. McKenney
2016-01-26 12:10 ` Will Deacon
2016-01-26 23:37 ` Paul E. McKenney
2016-01-27 10:23 ` Will Deacon
2016-01-15 8:55 ` Peter Zijlstra
2016-01-15 9:13 ` Peter Zijlstra
2016-01-15 17:46 ` Paul E. McKenney
2016-01-15 21:27 ` Peter Zijlstra
2016-01-15 21:58 ` Paul E. McKenney
2016-01-25 16:42 ` Will Deacon
2016-01-26 6:03 ` Paul E. McKenney
2016-01-26 10:19 ` Peter Zijlstra
2016-01-26 20:13 ` Paul E. McKenney
2016-01-27 8:39 ` Peter Zijlstra
2016-01-26 12:16 ` Will Deacon
2016-01-26 14:35 ` Boqun Feng
2016-01-26 19:58 ` Paul E. McKenney
2016-01-27 10:25 ` Will Deacon
2016-01-27 23:32 ` Paul E. McKenney
2016-01-15 17:39 ` Paul E. McKenney
2016-01-15 21:29 ` Peter Zijlstra
2016-01-15 22:01 ` Paul E. McKenney
2016-01-25 18:02 ` Will Deacon
2016-01-26 6:12 ` Paul E. McKenney
2016-01-26 10:15 ` Peter Zijlstra
2016-01-10 14:18 ` [PATCH v3 12/41] x86/um: " Michael S. Tsirkin
2016-01-10 14:18 ` [PATCH v3 13/41] x86: " Michael S. Tsirkin
2016-01-12 14:10 ` Thomas Gleixner
2016-01-10 14:18 ` [PATCH v3 14/41] asm-generic: add __smp_xxx wrappers Michael S. Tsirkin
2016-01-10 14:18 ` [PATCH v3 15/41] powerpc: define __smp_xxx Michael S. Tsirkin
2016-01-10 14:18 ` [PATCH v3 16/41] arm64: " Michael S. Tsirkin
2016-01-10 14:18 ` [PATCH v3 17/41] arm: " Michael S. Tsirkin
2016-01-10 14:19 ` [PATCH v3 18/41] blackfin: " Michael S. Tsirkin
2016-01-10 14:19 ` [PATCH v3 19/41] ia64: " Michael S. Tsirkin
2016-01-10 14:19 ` [PATCH v3 20/41] metag: " Michael S. Tsirkin
2016-01-10 14:19 ` [PATCH v3 21/41] mips: " Michael S. Tsirkin
2016-01-10 14:19 ` [PATCH v3 22/41] s390: " Michael S. Tsirkin
2016-01-10 14:19 ` [PATCH v3 23/41] sh: define __smp_xxx, fix smp_store_mb for !SMP Michael S. Tsirkin
2016-01-10 14:19 ` [PATCH v3 24/41] sparc: define __smp_xxx Michael S. Tsirkin
2016-01-10 14:20 ` [PATCH v3 25/41] tile: " Michael S. Tsirkin
2016-01-10 14:20 ` [PATCH v3 26/41] xtensa: " Michael S. Tsirkin
2016-01-10 14:20 ` [PATCH v3 27/41] x86: " Michael S. Tsirkin
2016-01-12 14:11 ` Thomas Gleixner
2016-01-10 14:20 ` [PATCH v3 28/41] asm-generic: implement virt_xxx memory barriers Michael S. Tsirkin
2016-01-10 14:20 ` [PATCH v3 29/41] Revert "virtio_ring: Update weak barriers to use dma_wmb/rmb" Michael S. Tsirkin
2016-01-10 14:20 ` [PATCH v3 30/41] virtio_ring: update weak barriers to use virt_xxx Michael S. Tsirkin
2016-01-10 14:20 ` [PATCH v3 31/41] sh: support 1 and 2 byte xchg Michael S. Tsirkin
2016-01-10 14:20 ` [PATCH v3 32/41] sh: move xchg_cmpxchg to a header by itself Michael S. Tsirkin
2016-01-10 14:21 ` Michael S. Tsirkin [this message]
2016-01-10 14:21 ` [PATCH v3 34/41] checkpatch.pl: add missing memory barriers Michael S. Tsirkin
2016-01-10 14:21 ` [PATCH v3 35/41] checkpatch: check for __smp outside barrier.h Michael S. Tsirkin
2016-01-10 14:21 ` [PATCH v3 36/41] checkpatch: add virt barriers Michael S. Tsirkin
2016-01-10 14:21 ` [PATCH v3 37/41] xenbus: use virt_xxx barriers Michael S. Tsirkin
2016-01-10 14:21 ` [PATCH v3 38/41] xen/io: " Michael S. Tsirkin
2016-01-10 14:21 ` [PATCH v3 39/41] xen/events: " Michael S. Tsirkin
2016-01-11 11:12 ` David Vrabel
2016-01-10 14:22 ` [PATCH v3 40/41] s390: use generic memory barriers Michael S. Tsirkin
2016-01-10 14:22 ` [PATCH v3 41/41] s390: more efficient smp barriers Michael S. Tsirkin
2016-01-12 12:50 ` [PATCH v3 00/41] arch: barrier cleanup + barriers for virt Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452426622-4471-34-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).