From mboxrd@z Thu Jan 1 00:00:00 1970 From: wxt@rock-chips.com (Caesar Wang) Date: Fri, 15 Jan 2016 21:49:49 +0800 Subject: [PATCH v3 2/9] ARM: dts: rockchip: add i2s_clk_out to list of clocks used on rk3036 i2s In-Reply-To: <1452865796-23527-1-git-send-email-wxt@rock-chips.com> References: <1452865796-23527-1-git-send-email-wxt@rock-chips.com> Message-ID: <1452865796-23527-3-git-send-email-wxt@rock-chips.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The I2S block that it needs to claim that output clock. This also adds properties to model the relationship between the output clock and the i2s clock itself, to ensure that the clock muxing is set correctly. Signed-off-by: Caesar Wang --- Changes in v3: None arch/arm/boot/dts/rk3036.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 0b128be..cf0968c 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -277,8 +277,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; - clock-names = "i2s_clk", "i2s_hclk"; - clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>; + clock-names = "i2s_clk", "i2s_hclk", "i2s_clk_out"; + clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>, <&cru SCLK_I2S_OUT>; dmas = <&pdma 0>, <&pdma 1>; dma-names = "tx", "rx"; pinctrl-names = "default"; -- 1.9.1