From mboxrd@z Thu Jan 1 00:00:00 1970 From: kernel@martin.sperl.org (kernel at martin.sperl.org) Date: Sun, 17 Jan 2016 12:15:31 +0000 Subject: [PATCH V3 4/4] ARM: bcm2835: add bcm2835-aux-uart support to default DT In-Reply-To: <1453032932-2512-1-git-send-email-kernel@martin.sperl.org> References: <1453032932-2512-1-git-send-email-kernel@martin.sperl.org> Message-ID: <1453032932-2512-5-git-send-email-kernel@martin.sperl.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Martin Sperl Add bcm2835-aux-uart support to the default device tree. Signed-off-by: Martin Sperl Note that this requires the aux-clock patches to be applied first and it may also conflict with the still pending merge of the rename of bcm2835.dtsi. --- arch/arm/boot/dts/bcm2835.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index b37a088..bfd42ae 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -149,6 +149,13 @@ status = "disabled"; }; + uart1: serial at 7e215040 { + compatible = "brcm,bcm2835-aux-uart"; + reg = <0x7e215040 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_UART>; + }; + sdhci: sdhci at 7e300000 { compatible = "brcm,bcm2835-sdhci"; reg = <0x7e300000 0x100>; -- 1.7.10.4