From mboxrd@z Thu Jan 1 00:00:00 1970 From: jszhang@marvell.com (Jisheng Zhang) Date: Wed, 20 Jan 2016 16:06:23 +0800 Subject: [PATCH 4/4] net: mvneta: update clocks property and document additional clock-names In-Reply-To: <1453277183-5412-1-git-send-email-jszhang@marvell.com> References: <1453277183-5412-1-git-send-email-jszhang@marvell.com> Message-ID: <1453277183-5412-5-git-send-email-jszhang@marvell.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Now that mvneta driver allows to have more than one clock defined, update the clocks property and document the clock-names property. Signed-off-by: Jisheng Zhang --- Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index aeea50c..f85b93b 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -6,12 +6,16 @@ Required properties: - interrupts: interrupt for the device - phy: See ethernet.txt file in the same directory. - phy-mode: See ethernet.txt file in the same directory -- clocks: a pointer to the reference clock for this device. +- clocks: Array of clocks required for this device; requires at least one + for CORE clock. Optional properties: - tx-csum-limit: maximum mtu supported by port that allow TX checksum. Value is presented in bytes. If not used, by default 1600B is set for "marvell,armada-370-neta" and 9800B for others. +- clock-names: Array of names corresponding to clocks property; shall be + "core" for CORE clock and "axi" for optional AXI clock. + Example: -- 2.7.0.rc3