From mboxrd@z Thu Jan 1 00:00:00 1970 From: rogershimizu@gmail.com (Roger Shimizu) Date: Wed, 20 Jan 2016 19:44:48 +0900 Subject: [PATCH] ARM: dts: orion5x: gpio pin fixes for linkstation lswtgl Message-ID: <1453286688-9533-1-git-send-email-rogershimizu@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Here're a few gpio pin related fixes: - remove pinctrl-0 definition from pinctrl, since those pins are used in other places such as gpio-fan and regulators. - turn on power led from initial state, by change pin to active_high from active_low. - fix for alarm pin of gpio-fan. Signed-off-by: Roger Shimizu --- arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index 3daec91..d40b593 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WTGL * - * Copyright (C) 2015, Roger Shimizu + * Copyright (C) 2015, 2016 + * Roger Shimizu * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -69,8 +70,6 @@ internal-regs { pinctrl: pinctrl at 10000 { - pinctrl-0 = <&pmx_usb_power &pmx_power_hdd - &pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; pmx_led_power: pmx-leds { @@ -161,7 +160,7 @@ led at 1 { label = "lswtgl:blue:power"; - gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; }; led at 2 { @@ -188,7 +187,7 @@ 3250 1 5000 0>; - alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; restart_poweroff { -- 2.1.4