From mboxrd@z Thu Jan 1 00:00:00 1970 From: rogershimizu@gmail.com (Roger Shimizu) Date: Thu, 21 Jan 2016 00:33:55 +0900 Subject: [PATCH v2 4/7] ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl In-Reply-To: <1453304038-28345-1-git-send-email-rogershimizu@gmail.com> References: <1453211342-25214-1-git-send-email-rogershimizu@gmail.com> <1453304038-28345-1-git-send-email-rogershimizu@gmail.com> Message-ID: <1453304038-28345-5-git-send-email-rogershimizu@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Make all leds initially to "off" state except power indicator, so pins below change from active_low to active_high: - gpio-leds: "lswvl:red:alarm" pin - gpio-leds: "lswvl:red:func" pin - gpio-leds: "lswvl:amber:info" pin - gpio-leds: "lswvl:blue:func" pin - gpio-leds: "lswvl:blue:power" pin - gpio-leds: "lswvl:red:hdderr{0,1}" pin Fixes: c43379e150aa ("ARM: dts: add buffalo linkstation ls-wvl/vl") Signed-off-by: Roger Shimizu --- arch/arm/boot/dts/kirkwood-lswvl.dts | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts index 28fd9abd7a57..20b6b0c8b3ec 100644 --- a/arch/arm/boot/dts/kirkwood-lswvl.dts +++ b/arch/arm/boot/dts/kirkwood-lswvl.dts @@ -186,38 +186,37 @@ led at 1 { label = "lswvl:red:alarm"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; led at 2 { label = "lswvl:red:func"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; led at 3 { label = "lswvl:amber:info"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; led at 4 { label = "lswvl:blue:func"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; led at 5 { label = "lswvl:blue:power"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; - default-state = "keep"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; led at 6 { label = "lswvl:red:hdderr0"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led at 7 { label = "lswvl:red:hdderr1"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; }; }; -- 2.1.4