From: blogic@openwrt.org (John Crispin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 07/11] soc: mediatek: PMIC wrap: move wdt_src into the pmic_wrapper_type struct
Date: Wed, 20 Jan 2016 20:58:59 +0100 [thread overview]
Message-ID: <1453319943-35491-7-git-send-email-blogic@openwrt.org> (raw)
In-Reply-To: <1453319943-35491-1-git-send-email-blogic@openwrt.org>
Make the handling of wdt_src consitent with the rest of the code.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/soc/mediatek/mtk-pmic-wrap.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
index ba7b6b5..8bb091b 100644
--- a/drivers/soc/mediatek/mtk-pmic-wrap.c
+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
@@ -373,6 +373,7 @@ struct pmic_wrapper_type {
u32 arb_en_all;
u32 int_en_all;
u32 spi_w;
+ u32 wdt_src;
int (*init_reg_clock)(struct pmic_wrapper *wrp);
int (*init_special)(struct pmic_wrapper *wrp);
};
@@ -828,6 +829,7 @@ static struct pmic_wrapper_type pwrap_mt8135 = {
.arb_en_all = 0x1ff,
.int_en_all = BIT(31) | BIT(1),
.spi_w = PWRAP_MAN_CMD_SPI_WRITE,
+ .wdt_src = PWRAP_WDT_SRC_MASK_ALL,
.init_reg_clock = pwrap_mt8135_init_reg_clock,
.init_special = pwrap_mt8135_init_special,
};
@@ -838,6 +840,7 @@ static struct pmic_wrapper_type pwrap_mt8173 = {
.arb_en_all = 0x3f,
.int_en_all = BIT(31) | BIT(1),
.spi_w = PWRAP_MAN_CMD_SPI_WRITE,
+ .wdt_src = PWRAP_WDT_SRC_MASK_NO_STAUPD,
.init_reg_clock = pwrap_mt8173_init_reg_clock,
.init_special = pwrap_mt8173_init_special,
};
@@ -857,7 +860,7 @@ MODULE_DEVICE_TABLE(of, of_pwrap_match_tbl);
static int pwrap_probe(struct platform_device *pdev)
{
- int ret, irq, wdt_src;
+ int ret, irq;
struct pmic_wrapper *wrp;
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *of_id =
@@ -947,9 +950,7 @@ static int pwrap_probe(struct platform_device *pdev)
* Since STAUPD was not used on mt8173 platform,
* so STAUPD of WDT_SRC which should be turned off
*/
- wdt_src = pwrap_is_mt8173(wrp) ?
- PWRAP_WDT_SRC_MASK_NO_STAUPD : PWRAP_WDT_SRC_MASK_ALL;
- pwrap_writel(wrp, wdt_src, PWRAP_WDT_SRC_EN);
+ pwrap_writel(wrp, wrp->master->wdt_src, PWRAP_WDT_SRC_EN);
pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN);
pwrap_writel(wrp, ~wrp->master->int_en_all, PWRAP_INT_EN);
--
1.7.10.4
next prev parent reply other threads:[~2016-01-20 19:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-20 19:58 [PATCH V2 01/11] dt-bindings: ARM: Mediatek: add MT2701/7623 string to the PMIC wrapper doc John Crispin
2016-01-20 19:58 ` [PATCH V2 02/11] soc: mediatek: PMIC wrap: don't duplicate the wrapper data John Crispin
2016-01-20 19:58 ` [PATCH V2 03/11] soc: mediatek: PMIC wrap: add wrapper callbacks for init_reg_clock John Crispin
2016-01-20 19:58 ` [PATCH V2 04/11] soc: mediatek: PMIC wrap: split SoC specific init into callback John Crispin
2016-01-20 19:58 ` [PATCH V2 05/11] soc: mediatek: PMIC wrap: WRAP_INT_EN needs a different bitmask for MT2701/7623 John Crispin
2016-01-20 19:58 ` [PATCH V2 06/11] soc: mediatek: PMIC wrap:: SPI_WRITE " John Crispin
2016-01-20 19:58 ` John Crispin [this message]
2016-01-20 19:59 ` [PATCH V2 08/11] soc: mediatek: PMIC wrap: remove pwrap_is_mt8135() and pwrap_is_mt8173() John Crispin
2016-01-20 19:59 ` [PATCH V2 09/11] soc: mediatek: PMIC wrap: add a slave specific struct John Crispin
2016-01-20 19:59 ` [PATCH V2 10/11] soc: mediatek: PMIC wrap: add mt6323 slave support John Crispin
2016-01-20 19:59 ` [PATCH V2 11/11] soc: mediatek: PMIC wrap: add MT2701/7623 support John Crispin
2016-01-29 3:23 ` [PATCH V2 01/11] dt-bindings: ARM: Mediatek: add MT2701/7623 string to the PMIC wrapper doc Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453319943-35491-7-git-send-email-blogic@openwrt.org \
--to=blogic@openwrt.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).