From: blogic@openwrt.org (John Crispin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 08/11] soc: mediatek: PMIC wrap: remove pwrap_is_mt8135() and pwrap_is_mt8173()
Date: Wed, 20 Jan 2016 20:59:00 +0100 [thread overview]
Message-ID: <1453319943-35491-8-git-send-email-blogic@openwrt.org> (raw)
In-Reply-To: <1453319943-35491-1-git-send-email-blogic@openwrt.org>
With ore SoCs being added the list of helper functions like these would
grow. While at it also add a new flag "bridge" and use that insted of
pwrap_is_mt8173() where appropriate.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/soc/mediatek/mtk-pmic-wrap.c | 27 +++++++++++----------------
1 file changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
index 8bb091b..54553b4 100644
--- a/drivers/soc/mediatek/mtk-pmic-wrap.c
+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
@@ -374,20 +374,11 @@ struct pmic_wrapper_type {
u32 int_en_all;
u32 spi_w;
u32 wdt_src;
+ int has_bridge;
int (*init_reg_clock)(struct pmic_wrapper *wrp);
int (*init_special)(struct pmic_wrapper *wrp);
};
-static inline int pwrap_is_mt8135(struct pmic_wrapper *wrp)
-{
- return wrp->master->type == PWRAP_MT8135;
-}
-
-static inline int pwrap_is_mt8173(struct pmic_wrapper *wrp)
-{
- return wrp->master->type == PWRAP_MT8173;
-}
-
static u32 pwrap_readl(struct pmic_wrapper *wrp, enum pwrap_regs reg)
{
return readl(wrp->base + wrp->master->regs[reg]);
@@ -619,11 +610,14 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
pwrap_writel(wrp, 0x1, PWRAP_CIPHER_KEY_SEL);
pwrap_writel(wrp, 0x2, PWRAP_CIPHER_IV_SEL);
- if (pwrap_is_mt8135(wrp)) {
+ switch (wrp->master->type) {
+ case PWRAP_MT8135:
pwrap_writel(wrp, 1, PWRAP_CIPHER_LOAD);
pwrap_writel(wrp, 1, PWRAP_CIPHER_START);
- } else {
+ break;
+ case PWRAP_MT8173:
pwrap_writel(wrp, 1, PWRAP_CIPHER_EN);
+ break;
}
/* Config cipher mode @PMIC */
@@ -713,7 +707,7 @@ static int pwrap_init(struct pmic_wrapper *wrp)
if (wrp->rstc_bridge)
reset_control_reset(wrp->rstc_bridge);
- if (pwrap_is_mt8173(wrp)) {
+ if (wrp->master->type == PWRAP_MT8173) {
/* Enable DCM */
pwrap_writel(wrp, 3, PWRAP_DCM_EN);
pwrap_writel(wrp, 0, PWRAP_DCM_DBC_PRD);
@@ -773,7 +767,7 @@ static int pwrap_init(struct pmic_wrapper *wrp)
pwrap_writel(wrp, PWRAP_DEW_CRC_VAL, PWRAP_SIG_ADR);
pwrap_writel(wrp, wrp->master->arb_en_all, PWRAP_HIPRIO_ARB_EN);
- if (pwrap_is_mt8135(wrp))
+ if (wrp->master->type == PWRAP_MT8135)
pwrap_writel(wrp, 0x7, PWRAP_RRARB_EN);
pwrap_writel(wrp, 0x1, PWRAP_WACS0_EN);
@@ -792,7 +786,7 @@ static int pwrap_init(struct pmic_wrapper *wrp)
pwrap_writel(wrp, 1, PWRAP_INIT_DONE0);
pwrap_writel(wrp, 1, PWRAP_INIT_DONE1);
- if (pwrap_is_mt8135(wrp)) {
+ if (wrp->master->has_bridge) {
writel(1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_INIT_DONE3);
writel(1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_INIT_DONE4);
}
@@ -830,6 +824,7 @@ static struct pmic_wrapper_type pwrap_mt8135 = {
.int_en_all = BIT(31) | BIT(1),
.spi_w = PWRAP_MAN_CMD_SPI_WRITE,
.wdt_src = PWRAP_WDT_SRC_MASK_ALL,
+ .has_bridge = 1,
.init_reg_clock = pwrap_mt8135_init_reg_clock,
.init_special = pwrap_mt8135_init_special,
};
@@ -888,7 +883,7 @@ static int pwrap_probe(struct platform_device *pdev)
return ret;
}
- if (pwrap_is_mt8135(wrp)) {
+ if (wrp->master->has_bridge) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"pwrap-bridge");
wrp->bridge_base = devm_ioremap_resource(wrp->dev, res);
--
1.7.10.4
next prev parent reply other threads:[~2016-01-20 19:59 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-20 19:58 [PATCH V2 01/11] dt-bindings: ARM: Mediatek: add MT2701/7623 string to the PMIC wrapper doc John Crispin
2016-01-20 19:58 ` [PATCH V2 02/11] soc: mediatek: PMIC wrap: don't duplicate the wrapper data John Crispin
2016-01-20 19:58 ` [PATCH V2 03/11] soc: mediatek: PMIC wrap: add wrapper callbacks for init_reg_clock John Crispin
2016-01-20 19:58 ` [PATCH V2 04/11] soc: mediatek: PMIC wrap: split SoC specific init into callback John Crispin
2016-01-20 19:58 ` [PATCH V2 05/11] soc: mediatek: PMIC wrap: WRAP_INT_EN needs a different bitmask for MT2701/7623 John Crispin
2016-01-20 19:58 ` [PATCH V2 06/11] soc: mediatek: PMIC wrap:: SPI_WRITE " John Crispin
2016-01-20 19:58 ` [PATCH V2 07/11] soc: mediatek: PMIC wrap: move wdt_src into the pmic_wrapper_type struct John Crispin
2016-01-20 19:59 ` John Crispin [this message]
2016-01-20 19:59 ` [PATCH V2 09/11] soc: mediatek: PMIC wrap: add a slave specific struct John Crispin
2016-01-20 19:59 ` [PATCH V2 10/11] soc: mediatek: PMIC wrap: add mt6323 slave support John Crispin
2016-01-20 19:59 ` [PATCH V2 11/11] soc: mediatek: PMIC wrap: add MT2701/7623 support John Crispin
2016-01-29 3:23 ` [PATCH V2 01/11] dt-bindings: ARM: Mediatek: add MT2701/7623 string to the PMIC wrapper doc Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453319943-35491-8-git-send-email-blogic@openwrt.org \
--to=blogic@openwrt.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).