From: rogershimizu@gmail.com (Roger Shimizu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/7] ARM: dts: kirkwood: fixes and split of linkstation dts for ls-wvl/vl and ls-wxl/wsxl
Date: Thu, 21 Jan 2016 23:38:43 +0900 [thread overview]
Message-ID: <1453387130-6914-1-git-send-email-rogershimizu@gmail.com> (raw)
In-Reply-To: <1453211342-25214-1-git-send-email-rogershimizu@gmail.com>
Dear kirkwood maintainers,
Linkstation dts for ls-wxl and ls-wvl need some fixes:
- [patch 1/7] and [patch 2/7] are fixes for gpio pin
- [patch 3/7] and [patch 4/7] are fixes for gpio led
Above 4 patches can be safely backported to 4.3/4.4 stable kernel.
And in order to support more buffalo linkstation devices in convenient way,
I split current 2 dts files into a few comoon dtsi files and device specific
dts files.
- [patch 5/7] relicense dts under GPLv2/X11
- [patch 6/7] split dts for lswxl
- [patch 7/7] split dts for lswvl
Changes in v2:
- separate the fix and relicense patch
- add "linkstation:" to all led labels
Changes in v3:
- address Andrew Lunn's suggestion to change commit message
for [patch 3/7] and [patch 4/7]
- add Andrew Lunn's "Reviewed-by"
- address active high/low for the power LED
Cheers.
Roger Shimizu (7):
ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxl
ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wvl/vl
ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl
ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl
ARM: dts: kirkwood: relicense dts of ls-wvl/vl and ls-wxl/wsxl under
GPLv2/X11
ARM: dts: kirkwood: split lswxl dts to linkstation lswsxl and lswxl
ARM: dts: kirkwood: split lswvl dts to linkstation lsvl and lswvl
.../devicetree/bindings/arm/marvell,kirkwood.txt | 6 +-
arch/arm/boot/dts/Makefile | 6 +-
arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi | 192 +++++++++++++
.../boot/dts/kirkwood-linkstation-duo-6281.dtsi | 186 +++++++++++++
arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts | 57 ++++
arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts | 57 ++++
arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts | 112 ++++++++
arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts | 116 ++++++++
arch/arm/boot/dts/kirkwood-linkstation.dtsi | 202 ++++++++++++++
arch/arm/boot/dts/kirkwood-lswvl.dts | 301 ---------------------
arch/arm/boot/dts/kirkwood-lswxl.dts | 301 ---------------------
11 files changed, 930 insertions(+), 606 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
create mode 100644 arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
create mode 100644 arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
create mode 100644 arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
create mode 100644 arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
create mode 100644 arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
create mode 100644 arch/arm/boot/dts/kirkwood-linkstation.dtsi
delete mode 100644 arch/arm/boot/dts/kirkwood-lswvl.dts
delete mode 100644 arch/arm/boot/dts/kirkwood-lswxl.dts
--
2.1.4
next prev parent reply other threads:[~2016-01-21 14:38 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-19 13:49 [PATCH 0/2] ARM: dts: kirkwood: split lswxl and lswvl with fixes Roger Shimizu
2016-01-19 13:49 ` [PATCH 1/2] ARM: dts: kirkwood: split lswxl into linkstation lswsxl and lswxl Roger Shimizu
2016-01-19 14:05 ` Andrew Lunn
2016-01-19 14:15 ` Roger Shimizu
2016-01-19 14:48 ` Andrew Lunn
2016-01-19 14:56 ` Roger Shimizu
2016-01-20 1:08 ` Andrew Lunn
2016-01-19 13:49 ` [PATCH 2/2] ARM: dts: kirkwood: split lswvl into linkstation lsvl and lswvl Roger Shimizu
2016-01-20 15:33 ` [PATCH v2 0/7] ARM: dts: kirkwood: fixes and split of linkstation dts for ls-wvl/vl and ls-wxl/wsxl Roger Shimizu
2016-01-20 15:33 ` [PATCH v2 1/7] ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxl Roger Shimizu
2016-01-20 17:11 ` Andrew Lunn
2016-01-20 15:33 ` [PATCH v2 2/7] ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wvl/vl Roger Shimizu
2016-01-20 17:12 ` Andrew Lunn
2016-01-20 15:33 ` [PATCH v2 3/7] ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl Roger Shimizu
2016-01-20 17:16 ` Andrew Lunn
2016-01-21 0:16 ` Roger Shimizu
2016-01-21 0:30 ` Andrew Lunn
2016-01-20 15:33 ` [PATCH v2 4/7] ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl Roger Shimizu
2016-01-21 0:31 ` Andrew Lunn
2016-01-20 15:33 ` [PATCH v2 5/7] ARM: dts: kirkwood: relicense dts of ls-wvl/vl and ls-wxl/wsxl under GPLv2/X11 Roger Shimizu
2016-01-20 17:18 ` Andrew Lunn
2016-01-20 15:33 ` [PATCH v2 6/7] ARM: dts: kirkwood: split lswxl dts to linkstation lswsxl and lswxl Roger Shimizu
2016-01-20 17:21 ` Sebastian Hesselbarth
2016-01-21 15:06 ` Roger Shimizu
2016-01-21 0:36 ` Andrew Lunn
2016-01-20 15:33 ` [PATCH v2 7/7] ARM: dts: kirkwood: split lswvl dts to linkstation lsvl and lswvl Roger Shimizu
2016-01-21 0:37 ` Andrew Lunn
2016-01-21 14:38 ` Roger Shimizu [this message]
2016-01-21 14:38 ` [PATCH v3 1/7] ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxl Roger Shimizu
2016-01-21 14:38 ` [PATCH v3 2/7] ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wvl/vl Roger Shimizu
2016-01-21 14:38 ` [PATCH v3 3/7] ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl Roger Shimizu
2016-01-21 14:38 ` [PATCH v3 4/7] ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl Roger Shimizu
2016-01-21 14:38 ` [PATCH v3 5/7] ARM: dts: kirkwood: relicense dts of ls-wvl/vl and ls-wxl/wsxl under GPLv2/X11 Roger Shimizu
2016-01-21 14:38 ` [PATCH v3 6/7] ARM: dts: kirkwood: split lswxl dts to linkstation lswsxl and lswxl Roger Shimizu
2016-01-21 14:38 ` [PATCH v3 7/7] ARM: dts: kirkwood: split lswvl dts to linkstation lsvl and lswvl Roger Shimizu
2016-01-21 16:00 ` [PATCH v3 0/7] ARM: dts: kirkwood: fixes and split of linkstation dts for ls-wvl/vl and ls-wxl/wsxl Gregory CLEMENT
2016-01-21 16:05 ` Roger Shimizu
2016-01-21 16:18 ` Gregory CLEMENT
2016-01-21 16:23 ` Roger Shimizu
2016-01-25 15:17 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453387130-6914-1-git-send-email-rogershimizu@gmail.com \
--to=rogershimizu@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).