linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: ard.biesheuvel@linaro.org (Ard Biesheuvel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: mm: use correct mapping granularity under DEBUG_RODATA
Date: Thu, 28 Jan 2016 09:54:09 +0100	[thread overview]
Message-ID: <1453971249-4407-1-git-send-email-ard.biesheuvel@linaro.org> (raw)

(cherry picked from commit 4fee9f364b9b99f76732f2a6fd6df679a237fa74)

When booting a 64k pages kernel that is built with CONFIG_DEBUG_RODATA
and resides at an offset that is not a multiple of 512 MB, the rounding
that occurs in __map_memblock() and fixup_executable() results in
incorrect regions being mapped.

The following snippet from /sys/kernel/debug/kernel_page_tables shows
how, when the kernel is loaded 2 MB above the base of DRAM at 0x40000000,
the first 2 MB of memory (which may be inaccessible from non-secure EL1
or just reserved by the firmware) is inadvertently mapped into the end of
the module region.

  ---[ Modules start ]---
  0xfffffdffffe00000-0xfffffe0000000000     2M RW NX ... UXN MEM/NORMAL
  ---[ Modules end ]---
  ---[ Kernel Mapping ]---
  0xfffffe0000000000-0xfffffe0000090000   576K RW NX ... UXN MEM/NORMAL
  0xfffffe0000090000-0xfffffe0000200000  1472K ro x  ... UXN MEM/NORMAL
  0xfffffe0000200000-0xfffffe0000800000     6M ro x  ... UXN MEM/NORMAL
  0xfffffe0000800000-0xfffffe0000810000    64K ro x  ... UXN MEM/NORMAL
  0xfffffe0000810000-0xfffffe0000a00000  1984K RW NX ... UXN MEM/NORMAL
  0xfffffe0000a00000-0xfffffe00ffe00000  4084M RW NX ... UXN MEM/NORMAL

The same issue is likely to occur on 16k pages kernels whose load
address is not a multiple of 32 MB (i.e., SECTION_SIZE). So round to
SWAPPER_BLOCK_SIZE instead of SECTION_SIZE.

Fixes: da141706aea5 ("arm64: add better page protections to arm64")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Cc: <stable@vger.kernel.org> # 4.0+
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ard.biesheuvel: add #define of SWAPPER_BLOCK_SIZE for -stable version]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
 arch/arm64/mm/mmu.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 5b8b664422d3..3b85ced2668a 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -300,6 +300,7 @@ static void create_mapping_late(phys_addr_t phys, unsigned long virt,
 }
 
 #ifdef CONFIG_DEBUG_RODATA
+#define SWAPPER_BLOCK_SIZE	(PAGE_SHIFT == 12 ? SECTION_SIZE : PAGE_SIZE)
 static void __init __map_memblock(phys_addr_t start, phys_addr_t end)
 {
 	/*
@@ -307,8 +308,8 @@ static void __init __map_memblock(phys_addr_t start, phys_addr_t end)
 	 * for now. This will get more fine grained later once all memory
 	 * is mapped
 	 */
-	unsigned long kernel_x_start = round_down(__pa(_stext), SECTION_SIZE);
-	unsigned long kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
+	unsigned long kernel_x_start = round_down(__pa(_stext), SWAPPER_BLOCK_SIZE);
+	unsigned long kernel_x_end = round_up(__pa(__init_end), SWAPPER_BLOCK_SIZE);
 
 	if (end < kernel_x_start) {
 		create_mapping(start, __phys_to_virt(start),
@@ -396,18 +397,18 @@ void __init fixup_executable(void)
 {
 #ifdef CONFIG_DEBUG_RODATA
 	/* now that we are actually fully mapped, make the start/end more fine grained */
-	if (!IS_ALIGNED((unsigned long)_stext, SECTION_SIZE)) {
+	if (!IS_ALIGNED((unsigned long)_stext, SWAPPER_BLOCK_SIZE)) {
 		unsigned long aligned_start = round_down(__pa(_stext),
-							SECTION_SIZE);
+							 SWAPPER_BLOCK_SIZE);
 
 		create_mapping(aligned_start, __phys_to_virt(aligned_start),
 				__pa(_stext) - aligned_start,
 				PAGE_KERNEL);
 	}
 
-	if (!IS_ALIGNED((unsigned long)__init_end, SECTION_SIZE)) {
+	if (!IS_ALIGNED((unsigned long)__init_end, SWAPPER_BLOCK_SIZE)) {
 		unsigned long aligned_end = round_up(__pa(__init_end),
-							SECTION_SIZE);
+							  SWAPPER_BLOCK_SIZE);
 		create_mapping(__pa(__init_end), (unsigned long)__init_end,
 				aligned_end - __pa(__init_end),
 				PAGE_KERNEL);
-- 
2.5.0

             reply	other threads:[~2016-01-28  8:54 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-28  8:54 Ard Biesheuvel [this message]
  -- strict thread matches above, loose matches on Subject: below --
2015-11-16 10:18 [PATCH] arm64: mm: use correct mapping granularity under DEBUG_RODATA Ard Biesheuvel
2015-11-16 11:57 ` Mark Rutland
2015-11-16 12:00   ` Ard Biesheuvel
2015-11-16 12:16     ` Mark Rutland
2015-11-16 12:18       ` Ard Biesheuvel
2015-11-17 11:11         ` Catalin Marinas
2015-11-17 11:14           ` Ard Biesheuvel
2015-11-16 23:14 ` Laura Abbott

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1453971249-4407-1-git-send-email-ard.biesheuvel@linaro.org \
    --to=ard.biesheuvel@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).