linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V13 06/10] dma: qcom_hidma: add debugfs hooks
Date: Fri, 29 Jan 2016 17:35:09 -0500	[thread overview]
Message-ID: <1454106914-15857-7-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1454106914-15857-1-git-send-email-okaya@codeaurora.org>

Add debugfs hooks for debugging the execution behavior of the DMA
channel. The debugfs hooks get initialized by the probe function and
uninitialized by the remove function.

A stats file is created in debugfs. The stats file will show the
information about each HIDMA channel as well as each asynchronous job
queued and completed at a given time.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/dma/qcom/Makefile    |   2 +-
 drivers/dma/qcom/hidma.c     |   3 +
 drivers/dma/qcom/hidma.h     |   2 +
 drivers/dma/qcom/hidma_dbg.c | 219 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 225 insertions(+), 1 deletion(-)
 create mode 100644 drivers/dma/qcom/hidma_dbg.c

diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
index 6bf9267..4bfc38b 100644
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -2,4 +2,4 @@ obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
 obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
 hdma_mgmt-objs	 := hidma_mgmt.o hidma_mgmt_sys.o
 obj-$(CONFIG_QCOM_HIDMA) +=  hdma.o
-hdma-objs        := hidma_ll.o hidma.o
+hdma-objs        := hidma_ll.o hidma.o hidma_dbg.o
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index f8960f1..833db9e 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -681,6 +681,7 @@ static int hidma_probe(struct platform_device *pdev)
 
 	dmadev->irq = chirq;
 	tasklet_init(&dmadev->task, hidma_issue_task, (unsigned long)dmadev);
+	hidma_debug_init(dmadev);
 	dev_info(&pdev->dev, "HI-DMA engine driver registration complete\n");
 	platform_set_drvdata(pdev, dmadev);
 	pm_runtime_mark_last_busy(dmadev->ddev.dev);
@@ -689,6 +690,7 @@ static int hidma_probe(struct platform_device *pdev)
 	return 0;
 
 uninit:
+	hidma_debug_uninit(dmadev);
 	hidma_ll_uninit(dmadev->lldev);
 dmafree:
 	if (dmadev)
@@ -706,6 +708,7 @@ static int hidma_remove(struct platform_device *pdev)
 	pm_runtime_get_sync(dmadev->ddev.dev);
 	dma_async_device_unregister(&dmadev->ddev);
 	devm_free_irq(dmadev->ddev.dev, dmadev->irq, dmadev->lldev);
+	hidma_debug_uninit(dmadev);
 	hidma_ll_uninit(dmadev->lldev);
 	hidma_free(dmadev);
 
diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
index 1e09d7c..c6b3ae0 100644
--- a/drivers/dma/qcom/hidma.h
+++ b/drivers/dma/qcom/hidma.h
@@ -157,4 +157,6 @@ int hidma_ll_uninit(struct hidma_lldev *llhndl);
 irqreturn_t hidma_ll_inthandler(int irq, void *arg);
 void hidma_cleanup_pending_tre(struct hidma_lldev *llhndl, u8 err_info,
 				u8 err_code);
+int hidma_debug_init(struct hidma_dev *dmadev);
+void hidma_debug_uninit(struct hidma_dev *dmadev);
 #endif
diff --git a/drivers/dma/qcom/hidma_dbg.c b/drivers/dma/qcom/hidma_dbg.c
new file mode 100644
index 0000000..fe35002
--- /dev/null
+++ b/drivers/dma/qcom/hidma_dbg.c
@@ -0,0 +1,219 @@
+/*
+ * Qualcomm Technologies HIDMA debug file
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/pm_runtime.h>
+
+#include "hidma.h"
+
+static void hidma_ll_chstats(struct seq_file *s, void *llhndl, u32 tre_ch)
+{
+	struct hidma_lldev *lldev = llhndl;
+	struct hidma_tre *tre;
+	u32 length;
+	dma_addr_t src_start;
+	dma_addr_t dest_start;
+	u32 *tre_local;
+
+	if (tre_ch >= lldev->nr_tres) {
+		dev_err(lldev->dev, "invalid TRE number in chstats:%d", tre_ch);
+		return;
+	}
+	tre = &lldev->trepool[tre_ch];
+	seq_printf(s, "------Channel %d -----\n", tre_ch);
+	seq_printf(s, "allocated=%d\n", atomic_read(&tre->allocated));
+	seq_printf(s, "queued = 0x%x\n", tre->queued);
+	seq_printf(s, "err_info = 0x%x\n",
+		   lldev->tx_status_list[tre->idx].err_info);
+	seq_printf(s, "err_code = 0x%x\n",
+		   lldev->tx_status_list[tre->idx].err_code);
+	seq_printf(s, "status = 0x%x\n", tre->status);
+	seq_printf(s, "idx = 0x%x\n", tre->idx);
+	seq_printf(s, "dma_sig = 0x%x\n", tre->dma_sig);
+	seq_printf(s, "dev_name=%s\n", tre->dev_name);
+	seq_printf(s, "callback=%p\n", tre->callback);
+	seq_printf(s, "data=%p\n", tre->data);
+	seq_printf(s, "tre_index = 0x%x\n", tre->tre_index);
+
+	tre_local = &tre->tre_local[0];
+	src_start = tre_local[TRE_SRC_LOW_IDX];
+	src_start = ((u64) (tre_local[TRE_SRC_HI_IDX]) << 32) + src_start;
+	dest_start = tre_local[TRE_DEST_LOW_IDX];
+	dest_start += ((u64) (tre_local[TRE_DEST_HI_IDX]) << 32);
+	length = tre_local[TRE_LEN_IDX];
+
+	seq_printf(s, "src=%pap\n", &src_start);
+	seq_printf(s, "dest=%pap\n", &dest_start);
+	seq_printf(s, "length = 0x%x\n", length);
+}
+
+static void hidma_ll_devstats(struct seq_file *s, void *llhndl)
+{
+	struct hidma_lldev *lldev = llhndl;
+
+	seq_puts(s, "------Device -----\n");
+	seq_printf(s, "lldev init = 0x%x\n", lldev->initialized);
+	seq_printf(s, "trch_state = 0x%x\n", lldev->trch_state);
+	seq_printf(s, "evch_state = 0x%x\n", lldev->evch_state);
+	seq_printf(s, "chidx = 0x%x\n", lldev->chidx);
+	seq_printf(s, "nr_tres = 0x%x\n", lldev->nr_tres);
+	seq_printf(s, "trca=%p\n", lldev->trca);
+	seq_printf(s, "tre_ring=%p\n", lldev->tre_ring);
+	seq_printf(s, "tre_ring_handle=%pap\n", &lldev->tre_ring_handle);
+	seq_printf(s, "tre_ring_size = 0x%x\n", lldev->tre_ring_size);
+	seq_printf(s, "tre_processed_off = 0x%x\n", lldev->tre_processed_off);
+	seq_printf(s, "pending_tre_count=%d\n", lldev->pending_tre_count);
+	seq_printf(s, "evca=%p\n", lldev->evca);
+	seq_printf(s, "evre_ring=%p\n", lldev->evre_ring);
+	seq_printf(s, "evre_ring_handle=%pap\n", &lldev->evre_ring_handle);
+	seq_printf(s, "evre_ring_size = 0x%x\n", lldev->evre_ring_size);
+	seq_printf(s, "evre_processed_off = 0x%x\n", lldev->evre_processed_off);
+	seq_printf(s, "tre_write_offset = 0x%x\n", lldev->tre_write_offset);
+}
+
+/*
+ * hidma_chan_stats: display HIDMA channel statistics
+ *
+ * Display the statistics for the current HIDMA virtual channel device.
+ */
+static int hidma_chan_stats(struct seq_file *s, void *unused)
+{
+	struct hidma_chan *mchan = s->private;
+	struct hidma_desc *mdesc;
+	struct hidma_dev *dmadev = mchan->dmadev;
+
+	pm_runtime_get_sync(dmadev->ddev.dev);
+	seq_printf(s, "paused=%u\n", mchan->paused);
+	seq_printf(s, "dma_sig=%u\n", mchan->dma_sig);
+	seq_puts(s, "prepared\n");
+	list_for_each_entry(mdesc, &mchan->prepared, node)
+		hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+	seq_puts(s, "active\n");
+	list_for_each_entry(mdesc, &mchan->active, node)
+		hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+	seq_puts(s, "completed\n");
+	list_for_each_entry(mdesc, &mchan->completed, node)
+		hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+	hidma_ll_devstats(s, mchan->dmadev->lldev);
+	pm_runtime_mark_last_busy(dmadev->ddev.dev);
+	pm_runtime_put_autosuspend(dmadev->ddev.dev);
+	return 0;
+}
+
+/*
+ * hidma_dma_info: display HIDMA device info
+ *
+ * Display the info for the current HIDMA device.
+ */
+static int hidma_dma_info(struct seq_file *s, void *unused)
+{
+	struct hidma_dev *dmadev = s->private;
+	resource_size_t sz;
+
+	seq_printf(s, "nr_descriptors=%d\n", dmadev->nr_descriptors);
+	seq_printf(s, "dev_trca=%p\n", &dmadev->dev_trca);
+	seq_printf(s, "dev_trca_phys=%pa\n", &dmadev->trca_resource->start);
+	sz = resource_size(dmadev->trca_resource);
+	seq_printf(s, "dev_trca_size=%pa\n", &sz);
+	seq_printf(s, "dev_evca=%p\n", &dmadev->dev_evca);
+	seq_printf(s, "dev_evca_phys=%pa\n", &dmadev->evca_resource->start);
+	sz = resource_size(dmadev->evca_resource);
+	seq_printf(s, "dev_evca_size=%pa\n", &sz);
+	return 0;
+}
+
+static int hidma_chan_stats_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, hidma_chan_stats, inode->i_private);
+}
+
+static int hidma_dma_info_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, hidma_dma_info, inode->i_private);
+}
+
+static const struct file_operations hidma_chan_fops = {
+	.open = hidma_chan_stats_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static const struct file_operations hidma_dma_fops = {
+	.open = hidma_dma_info_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+void hidma_debug_uninit(struct hidma_dev *dmadev)
+{
+	debugfs_remove_recursive(dmadev->debugfs);
+	debugfs_remove_recursive(dmadev->stats);
+}
+
+int hidma_debug_init(struct hidma_dev *dmadev)
+{
+	int rc = 0;
+	int chidx = 0;
+	struct list_head *position = NULL;
+
+	dmadev->debugfs = debugfs_create_dir(dev_name(dmadev->ddev.dev), NULL);
+	if (!dmadev->debugfs) {
+		rc = -ENODEV;
+		return rc;
+	}
+
+	/* walk through the virtual channel list */
+	list_for_each(position, &dmadev->ddev.channels) {
+		struct hidma_chan *chan;
+
+		chan = list_entry(position, struct hidma_chan,
+				  chan.device_node);
+		sprintf(chan->dbg_name, "chan%d", chidx);
+		chan->debugfs = debugfs_create_dir(chan->dbg_name,
+						   dmadev->debugfs);
+		if (!chan->debugfs) {
+			rc = -ENOMEM;
+			goto cleanup;
+		}
+		chan->stats = debugfs_create_file("stats", S_IRUGO,
+						  chan->debugfs, chan,
+						  &hidma_chan_fops);
+		if (!chan->stats) {
+			rc = -ENOMEM;
+			goto cleanup;
+		}
+		chidx++;
+	}
+
+	dmadev->stats = debugfs_create_file("stats", S_IRUGO,
+					    dmadev->debugfs, dmadev,
+					    &hidma_dma_fops);
+	if (!dmadev->stats) {
+		rc = -ENOMEM;
+		goto cleanup;
+	}
+
+	return 0;
+cleanup:
+	hidma_debug_uninit(dmadev);
+	return rc;
+}
-- 
1.8.2.1

  parent reply	other threads:[~2016-01-29 22:35 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-29 22:35 [PATCH V13 00/10] dma: add Qualcomm Technologies HIDMA driver Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 01/10] dma: qcom_bam_dma: move to qcom directory Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 02/10] dma: hidma: Add Device Tree binding Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 03/10] dma: add Qualcomm Technologies HIDMA management driver Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 04/10] dma: add Qualcomm Technologies HIDMA channel driver Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 05/10] dma: qcom_hidma: implement lower level hardware interface Sinan Kaya
2016-01-29 22:35 ` Sinan Kaya [this message]
2016-01-29 22:35 ` [PATCH V13 07/10] dma: qcom_hidma: add support for object hierarchy Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW Sinan Kaya
2016-02-01 15:14   ` Rob Herring
2016-02-03 18:32     ` Sinan Kaya
2016-02-01 15:35   ` Mark Rutland
2016-02-01 15:46     ` Sinan Kaya
2016-02-03 18:32     ` Sinan Kaya
2016-02-03 18:36       ` Mark Rutland
2016-02-03 18:46         ` Sinan Kaya
2016-02-07 15:04         ` Sinan Kaya
2016-02-09 21:01           ` Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver Sinan Kaya
2016-01-30 12:52   ` kbuild test robot
2016-01-31 13:53   ` Sinan Kaya
2016-02-01 16:08   ` Eric Auger
2016-02-01 16:16     ` Sinan Kaya
2016-02-01 16:29       ` Eric Auger
2016-02-01 16:44         ` Sinan Kaya
2016-02-01 16:49           ` Timur Tabi
2016-02-01 16:56             ` Sinan Kaya
2016-02-03 18:38         ` Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 10/10] vfio, platform: add QTI HIDMA " Sinan Kaya
2016-02-01 15:41   ` Eric Auger
2016-02-01 15:51     ` Sinan Kaya

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454106914-15857-7-git-send-email-okaya@codeaurora.org \
    --to=okaya@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).