[PATCH V2 4/6] Documentations: Add explanations of the case for non-configurable masters

[zhang.chunyan@linaro.org (Chunyan Zhang)]

For some STM hardware (e.g. ARM CoreSight STM), the masterID associated
to a source is set at the hardware level and not user configurable.
Since the masterID information isn't available to SW, introducing
a new value of -1 to reflect this reality.

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
---
 Documentation/trace/stm.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/trace/stm.txt b/Documentation/trace/stm.txt
index ea035f9..f03bc2b 100644
--- a/Documentation/trace/stm.txt
+++ b/Documentation/trace/stm.txt
@@ -47,6 +47,12 @@ through 127 in it. Now, any producer (trace source) identifying itself
 with "user" identification string will be allocated a master and
 channel from within these ranges.
 
+$ cat /config/stp-policy/dummy_stm.my-policy/user/masters
+-1 -1
+
+Would indicate the masters for this rule are set in hardware and
+not configurable in user space.
+
 These rules can be nested, for example, one can define a rule "dummy"
 under "user" directory from the example above and this new rule will
 be used for trace sources with the id string of "user/dummy".
-- 
1.9.1