From mboxrd@z Thu Jan  1 00:00:00 1970
From: codekipper@gmail.com (codekipper at gmail.com)
Date: Tue,  9 Feb 2016 10:25:32 +0100
Subject: [linux-sunxi][PATCH] ARM: dts: sun7i: Enable USB DRC on MK808C
Message-ID: <1455009932-27616-1-git-send-email-codekipper@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

From: Marcus Cooper <codekipper@gmail.com>

Enable the otg/drc usb controller on the MK808C.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 arch/arm/boot/dts/sun7i-a20-mk808c.dts | 35 ++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
index c9e648d..90ff4a2 100644
--- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts
+++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
@@ -53,6 +53,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "mk808c";
@@ -125,6 +126,30 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin at 0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin at 0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -145,7 +170,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
-- 
2.7.1