From: eric.auger@linaro.org (Eric Auger)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC v2 10/15] vfio: allow the user to register reserved iova range for MSI mapping
Date: Thu, 11 Feb 2016 14:34:17 +0000 [thread overview]
Message-ID: <1455201262-5259-11-git-send-email-eric.auger@linaro.org> (raw)
In-Reply-To: <1455201262-5259-1-git-send-email-eric.auger@linaro.org>
The user is allowed to register a reserved IOVA range by using the
DMA MAP API and setting the new flag: VFIO_DMA_MAP_FLAG_MSI_RESERVED_IOVA.
It provides the base address and the size. This region is stored in the
vfio_dma rb tree. At that point the iova range is not mapped to any target
address yet. The host kernel will use those iova when needed, typically
when the VFIO-PCI device allocates its MSI's.
This patch also handles the destruction of the reserved binding RB-tree and
domain's iova_domains.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
---
v1 -> v2:
- set returned value according to alloc_reserved_iova_domain result
- free the iova domains in case any error occurs
RFC v1 -> v1:
- takes into account Alex comments, based on
[RFC PATCH 1/6] vfio: Add interface for add/del reserved iova region:
- use the existing dma map/unmap ioctl interface with a flag to register
a reserved IOVA range. A single reserved iova region is allowed.
---
drivers/vfio/vfio_iommu_type1.c | 75 ++++++++++++++++++++++++++++++++++++++++-
include/uapi/linux/vfio.h | 9 +++++
2 files changed, 83 insertions(+), 1 deletion(-)
diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
index b9326c9..c5d3b48 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -673,6 +673,75 @@ static int vfio_dma_do_map(struct vfio_iommu *iommu,
return ret;
}
+static int vfio_register_reserved_iova_range(struct vfio_iommu *iommu,
+ struct vfio_iommu_type1_dma_map *map)
+{
+ dma_addr_t iova = map->iova;
+ size_t size = map->size;
+ uint64_t mask;
+ struct vfio_dma *dma;
+ int ret = 0;
+ struct vfio_domain *d;
+ unsigned long order;
+
+ /* Verify that none of our __u64 fields overflow */
+ if (map->size != size || map->iova != iova)
+ return -EINVAL;
+
+ order = __ffs(vfio_pgsize_bitmap(iommu));
+ mask = ((uint64_t)1 << order) - 1;
+
+ WARN_ON(mask & PAGE_MASK);
+
+ /* we currently only support MSI_RESERVED_IOVA */
+ if (!(map->flags & VFIO_DMA_MAP_FLAG_MSI_RESERVED_IOVA))
+ return -EINVAL;
+
+ if (!size || (size | iova) & mask)
+ return -EINVAL;
+
+ /* Don't allow IOVA address wrap */
+ if (iova + size - 1 < iova)
+ return -EINVAL;
+
+ mutex_lock(&iommu->lock);
+
+ /* check if the iova domain has not been instantiated already*/
+ d = list_first_entry(&iommu->domain_list,
+ struct vfio_domain, next);
+
+ if (vfio_find_dma(iommu, iova, size)) {
+ ret = -EEXIST;
+ goto out;
+ }
+
+ dma = kzalloc(sizeof(*dma), GFP_KERNEL);
+ if (!dma) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ dma->iova = iova;
+ dma->size = size;
+ dma->type = VFIO_IOVA_RESERVED;
+
+ list_for_each_entry(d, &iommu->domain_list, next)
+ ret |= iommu_alloc_reserved_iova_domain(d->domain, iova,
+ size, order);
+
+ if (ret) {
+ list_for_each_entry(d, &iommu->domain_list, next)
+ iommu_free_reserved_iova_domain(d->domain);
+ goto out;
+ }
+
+ vfio_link_dma(iommu, dma);
+
+out:
+ mutex_unlock(&iommu->lock);
+ return ret;
+}
+
static int vfio_bus_type(struct device *dev, void *data)
{
struct bus_type **bus = data;
@@ -1045,7 +1114,8 @@ static long vfio_iommu_type1_ioctl(void *iommu_data,
} else if (cmd == VFIO_IOMMU_MAP_DMA) {
struct vfio_iommu_type1_dma_map map;
uint32_t mask = VFIO_DMA_MAP_FLAG_READ |
- VFIO_DMA_MAP_FLAG_WRITE;
+ VFIO_DMA_MAP_FLAG_WRITE |
+ VFIO_DMA_MAP_FLAG_MSI_RESERVED_IOVA;
minsz = offsetofend(struct vfio_iommu_type1_dma_map, size);
@@ -1055,6 +1125,9 @@ static long vfio_iommu_type1_ioctl(void *iommu_data,
if (map.argsz < minsz || map.flags & ~mask)
return -EINVAL;
+ if (map.flags & VFIO_DMA_MAP_FLAG_MSI_RESERVED_IOVA)
+ return vfio_register_reserved_iova_range(iommu, &map);
+
return vfio_dma_do_map(iommu, &map);
} else if (cmd == VFIO_IOMMU_UNMAP_DMA) {
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index 43e183b..982e326 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -411,12 +411,21 @@ struct vfio_iommu_type1_info {
*
* Map process virtual addresses to IO virtual addresses using the
* provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
+ *
+ * In case MSI_RESERVED_IOVA is set, the API only aims@registering an IOVA
+ * region which will be used on some platforms to map the host MSI frame.
+ * in that specific case, vaddr and prot are ignored. The requirement for
+ * provisioning such IOVA range can be checked by calling VFIO_IOMMU_GET_INFO
+ * with the VFIO_IOMMU_INFO_REQUIRE_MSI_MAP attribute. A single
+ * MSI_RESERVED_IOVA region can be registered
*/
struct vfio_iommu_type1_dma_map {
__u32 argsz;
__u32 flags;
#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */
#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */
+/* reserved iova for MSI vectors*/
+#define VFIO_DMA_MAP_FLAG_MSI_RESERVED_IOVA (1 << 2)
__u64 vaddr; /* Process virtual address */
__u64 iova; /* IO virtual address */
__u64 size; /* Size of mapping (bytes) */
--
1.9.1
next prev parent reply other threads:[~2016-02-11 14:34 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-11 14:34 [RFC v2 00/15] KVM PCIe/MSI passthrough on ARM/ARM64 Eric Auger
2016-02-11 14:34 ` [RFC v2 01/15] iommu: Add DOMAIN_ATTR_MSI_MAPPING attribute Eric Auger
2016-02-11 14:34 ` [RFC v2 02/15] vfio: expose MSI mapping requirement through VFIO_IOMMU_GET_INFO Eric Auger
2016-02-11 14:34 ` [RFC v2 03/15] vfio: introduce VFIO_IOVA_RESERVED vfio_dma type Eric Auger
2016-02-11 14:34 ` [RFC v2 04/15] iommu: add alloc/free_reserved_iova_domain Eric Auger
2016-02-11 14:34 ` [RFC v2 05/15] iommu/arm-smmu: implement alloc/free_reserved_iova_domain Eric Auger
2016-02-11 14:34 ` [RFC v2 06/15] iommu/arm-smmu: add a reserved binding RB tree Eric Auger
2016-02-11 14:34 ` [RFC v2 07/15] iommu: iommu_get/put_single_reserved Eric Auger
2016-02-11 14:34 ` [RFC v2 08/15] iommu/arm-smmu: implement iommu_get/put_single_reserved Eric Auger
2016-02-11 14:34 ` [RFC v2 09/15] iommu/arm-smmu: relinquish reserved resources on domain deletion Eric Auger
2016-02-11 14:34 ` Eric Auger [this message]
2016-02-11 14:34 ` [RFC v2 11/15] msi: Add a new MSI_FLAG_IRQ_REMAPPING flag Eric Auger
2016-02-11 14:34 ` [RFC v2 12/15] msi: export msi_get_domain_info Eric Auger
2016-02-11 14:34 ` [RFC v2 13/15] vfio/type1: also check IRQ remapping capability at msi domain Eric Auger
2016-02-11 14:34 ` [RFC v2 14/15] iommu/arm-smmu: do not advertise IOMMU_CAP_INTR_REMAP Eric Auger
2016-02-11 14:34 ` [RFC v2 15/15] irqchip/gicv2m/v3-its-pci-msi: IOMMU map the MSI frame when needed Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455201262-5259-11-git-send-email-eric.auger@linaro.org \
--to=eric.auger@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).