[PATCH 0/5] irqchip: Add support for Hisilicon mbigen v1 chip

[PATCH 0/5] irqchip: Add support for Hisilicon mbigen v1 chip

[MaJun]

From: Ma Jun <majun258@huawei.com>

This patch set is used to support the mbigen v1 chip.
Compared to mbigen v2 chip, the main difference between them is
register layout(address,format)

As a sequence of this difference, the functions used to get or calculate
register address are also changed for this reason.

I posted this driver as a independent patch set but not change the mbigen-v2
driver to support mbigen-v1 hardware.

Ma Jun (5):
  dt-binding: Change the mbigen bindding file to support the mbigen-v1
  dt-binding:Rename the mbigen binding file name
  irqchip: add platform device driver for mbigen device
  irqchip:create irq domain for each mbigen device
  irqchip:implement the mbigen irq chip operation functions

 .../interrupt-controller/hisilicon,mbigen-v2.txt   |   74 -----
 .../interrupt-controller/hisilicon,mbigen.txt      |   74 +++++
 drivers/irqchip/Makefile                           |    2 +-
 drivers/irqchip/irq-mbigen-v1.c                    |  295 ++++++++++++++++++++
 4 files changed, 370 insertions(+), 75 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen.txt
 create mode 100644 drivers/irqchip/irq-mbigen-v1.c

[PATCH 1/5] dt-binding: Change the mbigen binding file to support the mbigen-v1

[MaJun]

From: Ma Jun <majun258@huawei.com>

Add the "hisilicon,mbigen-v1" string in binding file.
Signed-off-by: Ma Jun <majun258@huawei.com>
---
 .../interrupt-controller/hisilicon,mbigen-v2.txt   |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
index 720f7c9..bdd1dea 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
@@ -16,7 +16,7 @@ The mbigen chip and devices connect to mbigen have the following properties:
 
 Mbigen main node required properties:
 -------------------------------------------
-- compatible: Should be "hisilicon,mbigen-v2"
+- compatible: Should be "hisilicon,mbigen-v2" or "hisilicon,mbigen-v1"
 
 - reg: Specifies the base physical address and size of the Mbigen
   registers.
-- 
1.7.1

[PATCH 2/5] dt-binding:Rename the mbigen binding file name

[MaJun]

From: Ma Jun <majun258@huawei.com>

Because added the mbigen-v1 compatible string, the origin name is
not suitable any more. So,I remove the version number from file name.

Signed-off-by: Ma Jun <majun258@huawei.com>
---
 .../interrupt-controller/hisilicon,mbigen-v2.txt   |   74 --------------------
 .../interrupt-controller/hisilicon,mbigen.txt      |   74 ++++++++++++++++++++
 2 files changed, 74 insertions(+), 74 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
deleted file mode 100644
index bdd1dea..0000000
--- a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-Hisilicon mbigen device tree bindings.
-=======================================
-
-Mbigen means: message based interrupt generator.
-
-MBI is kind of msi interrupt only used on Non-PCI devices.
-
-To reduce the wired interrupt number connected to GIC,
-Hisilicon designed mbigen to collect and generate interrupt.
-
-
-Non-pci devices can connect to mbigen and generate the
-interrupt by writing ITS register.
-
-The mbigen chip and devices connect to mbigen have the following properties:
-
-Mbigen main node required properties:
--------------------------------------------
-- compatible: Should be "hisilicon,mbigen-v2" or "hisilicon,mbigen-v1"
-
-- reg: Specifies the base physical address and size of the Mbigen
-  registers.
-
-- interrupt controller: Identifies the node as an interrupt controller
-
-- msi-parent: Specifies the MSI controller this mbigen use.
-  For more detail information,please refer to the generic msi-parent binding in
-  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
-
-- num-pins: the total number of pins implemented in this Mbigen
-  instance.
-
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value must be 2.
-
-  The 1st cell is hardware pin number of the interrupt.This number is local to
-  each mbigen chip and in the range from 0 to the maximum interrupts number
-  of the mbigen.
-
-  The 2nd cell is the interrupt trigger type.
-	The value of this cell should be:
-	1: rising edge triggered
-	or
-	4: high level triggered
-
-Examples:
-
-	mbigen_device_gmac:intc {
-			compatible = "hisilicon,mbigen-v2";
-			reg = <0x0 0xc0080000 0x0 0x10000>;
-			interrupt-controller;
-			msi-parent = <&its_dsa 0x40b1c>;
-			num-pins = <9>;
-			#interrupt-cells = <2>;
-	};
-
-Devices connect to mbigen required properties:
-----------------------------------------------------
--interrupt-parent: Specifies the mbigen device node which device connected.
-
--interrupts:Specifies the interrupt source.
- For the specific information of each cell in this property,please refer to
- the "interrupt-cells" description mentioned above.
-
-Examples:
-	gmac0: ethernet at c2080000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0xc2080000 0 0x20000>,
-		      <0 0xc0000000 0 0x1000>;
-		interrupt-parent  = <&mbigen_device_gmac>;
-		interrupts =	<656 1>,
-				<657 1>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen.txt
new file mode 100644
index 0000000..bdd1dea
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen.txt
@@ -0,0 +1,74 @@
+Hisilicon mbigen device tree bindings.
+=======================================
+
+Mbigen means: message based interrupt generator.
+
+MBI is kind of msi interrupt only used on Non-PCI devices.
+
+To reduce the wired interrupt number connected to GIC,
+Hisilicon designed mbigen to collect and generate interrupt.
+
+
+Non-pci devices can connect to mbigen and generate the
+interrupt by writing ITS register.
+
+The mbigen chip and devices connect to mbigen have the following properties:
+
+Mbigen main node required properties:
+-------------------------------------------
+- compatible: Should be "hisilicon,mbigen-v2" or "hisilicon,mbigen-v1"
+
+- reg: Specifies the base physical address and size of the Mbigen
+  registers.
+
+- interrupt controller: Identifies the node as an interrupt controller
+
+- msi-parent: Specifies the MSI controller this mbigen use.
+  For more detail information,please refer to the generic msi-parent binding in
+  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+- num-pins: the total number of pins implemented in this Mbigen
+  instance.
+
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value must be 2.
+
+  The 1st cell is hardware pin number of the interrupt.This number is local to
+  each mbigen chip and in the range from 0 to the maximum interrupts number
+  of the mbigen.
+
+  The 2nd cell is the interrupt trigger type.
+	The value of this cell should be:
+	1: rising edge triggered
+	or
+	4: high level triggered
+
+Examples:
+
+	mbigen_device_gmac:intc {
+			compatible = "hisilicon,mbigen-v2";
+			reg = <0x0 0xc0080000 0x0 0x10000>;
+			interrupt-controller;
+			msi-parent = <&its_dsa 0x40b1c>;
+			num-pins = <9>;
+			#interrupt-cells = <2>;
+	};
+
+Devices connect to mbigen required properties:
+----------------------------------------------------
+-interrupt-parent: Specifies the mbigen device node which device connected.
+
+-interrupts:Specifies the interrupt source.
+ For the specific information of each cell in this property,please refer to
+ the "interrupt-cells" description mentioned above.
+
+Examples:
+	gmac0: ethernet at c2080000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0xc2080000 0 0x20000>,
+		      <0 0xc0000000 0 0x1000>;
+		interrupt-parent  = <&mbigen_device_gmac>;
+		interrupts =	<656 1>,
+				<657 1>;
+	};
-- 
1.7.1

[PATCH 3/5] irqchip: add platform device driver for mbigen device

[MaJun]

From: Ma Jun <majun258@huawei.com>

Add the platform device driver for mbigen chip v1.
This patch just same as mbigen v2.

Signed-off-by: Ma Jun <majun258@huawei.com>
---
 drivers/irqchip/Makefile        |    2 +-
 drivers/irqchip/irq-mbigen-v1.c |   76 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 77 insertions(+), 1 deletions(-)
 create mode 100644 drivers/irqchip/irq-mbigen-v1.c

diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 83d1fce..3152450 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_REALVIEW_DT)		+= irq-gic-realview.o
 obj-$(CONFIG_ARM_GIC_V2M)		+= irq-gic-v2m.o
 obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-common.o
 obj-$(CONFIG_ARM_GIC_V3_ITS)		+= irq-gic-v3-its.o irq-gic-v3-its-pci-msi.o irq-gic-v3-its-platform-msi.o
-obj-$(CONFIG_HISILICON_IRQ_MBIGEN)	+= irq-mbigen.o
+obj-$(CONFIG_HISILICON_IRQ_MBIGEN)	+= irq-mbigen.o irq-mbigen-v1.o
 obj-$(CONFIG_ARM_NVIC)			+= irq-nvic.o
 obj-$(CONFIG_ARM_VIC)			+= irq-vic.o
 obj-$(CONFIG_ATMEL_AIC_IRQ)		+= irq-atmel-aic-common.o irq-atmel-aic.o
diff --git a/drivers/irqchip/irq-mbigen-v1.c b/drivers/irqchip/irq-mbigen-v1.c
new file mode 100644
index 0000000..9445658
--- /dev/null
+++ b/drivers/irqchip/irq-mbigen-v1.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2015 Hisilicon Limited, All Rights Reserved.
+ * Author: Jun Ma <majun258@huawei.com>
+ * Author: Yun Wu <wuyun.wu@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/**
+ * struct mbigen_device - holds the information of mbigen device.
+ *
+ * @pdev:		pointer to the platform device structure of mbigen chip.
+ * @base:		mapped address of this mbigen chip.
+ */
+struct mbigen_device {
+	struct platform_device	*pdev;
+	void __iomem		*base;
+};
+
+static int mbigen_device_probe(struct platform_device *pdev)
+{
+	struct mbigen_device *mgn_chip;
+	struct resource *res;
+
+	mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL);
+	if (!mgn_chip)
+		return -ENOMEM;
+
+	mgn_chip->pdev = pdev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mgn_chip->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (IS_ERR(mgn_chip->base))
+		return PTR_ERR(mgn_chip->base);
+
+	platform_set_drvdata(pdev, mgn_chip);
+
+	return 0;
+}
+
+static const struct of_device_id mbigen_of_match[] = {
+	{ .compatible = "hisilicon,mbigen-v1" },
+	{ /* END */ }
+};
+MODULE_DEVICE_TABLE(of, mbigen_of_match);
+
+static struct platform_driver mbigen_platform_driver = {
+	.driver = {
+		.name		= "Hisilicon MBIGEN-V1",
+		.owner		= THIS_MODULE,
+		.of_match_table	= mbigen_of_match,
+	},
+	.probe			= mbigen_device_probe,
+};
+
+module_platform_driver(mbigen_platform_driver);
+
+MODULE_AUTHOR("Jun Ma <majun258@huawei.com>");
+MODULE_AUTHOR("Yun Wu <wuyun.wu@huawei.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Hisilicon MBI Generator driver");
-- 
1.7.1

[PATCH 4/5] irqchip:create irq domain for each mbigen device

[MaJun]

From: Ma Jun <majun258@huawei.com>

For peripheral devices which connect to mbigen,mbigen is a interrupt
controller. So, we create irq domain for each mbigen device and add
mbigen irq domain into irq hierarchy structure.

Signed-off-by: Ma Jun <majun258@huawei.com>
---
 drivers/irqchip/irq-mbigen-v1.c |  144 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 144 insertions(+), 0 deletions(-)

diff --git a/drivers/irqchip/irq-mbigen-v1.c b/drivers/irqchip/irq-mbigen-v1.c
index 9445658..6bbb82a 100644
--- a/drivers/irqchip/irq-mbigen-v1.c
+++ b/drivers/irqchip/irq-mbigen-v1.c
@@ -16,11 +16,30 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/interrupt.h>
+#include <linux/irqchip.h>
 #include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
+/* The maximum IRQ pin number of mbigen chip(start from 0) */
+#define MAXIMUM_IRQ_PIN_NUM		640
+
+/**
+ * In mbigen vector register
+ * bit[31:16]:	device id
+ * bit[15:0]:	event id value
+ */
+#define IRQ_EVENT_ID_MASK		0xffff
+
+/* offset of vector register in mbigen node */
+#define REG_MBIGEN_VEC_OFFSET		0x300
+#define REG_MBIGEN_EXT_VEC_OFFSET		0x320
+
 /**
  * struct mbigen_device - holds the information of mbigen device.
  *
@@ -32,10 +51,120 @@ struct mbigen_device {
 	void __iomem		*base;
 };
 
+static int get_mbigen_nid(unsigned int offset)
+{
+	int nid = 0;
+
+	if (offset < 256)
+		nid = offset / 64;
+	else if (offset < 384)
+		nid = 4;
+	else if (offset < 640)
+		nid = 5;
+
+	return nid;
+}
+
+static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
+{
+	unsigned int nid;
+
+	nid = get_mbigen_nid(hwirq);
+
+	if (nid < 4)
+		return (nid * 4) + REG_MBIGEN_VEC_OFFSET;
+	else
+		return (nid - 4) * 4 + REG_MBIGEN_EXT_VEC_OFFSET;
+}
+
+static struct irq_chip mbigen_irq_chip = {
+	.name =			"mbigen-v1",
+};
+
+static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg)
+{
+	struct irq_data *d = irq_get_irq_data(desc->irq);
+	void __iomem *base = d->chip_data;
+	u32 val;
+
+	base += get_mbigen_vec_reg(d->hwirq);
+	val = readl_relaxed(base);
+
+	val &= ~IRQ_EVENT_ID_MASK;
+	val |= msg->data;
+
+	/* The address of doorbell is encoded in mbigen register by default
+	 * So,we don't need to program the doorbell address at here
+	 */
+	writel_relaxed(val, base);
+}
+
+static int mbigen_domain_translate(struct irq_domain *d,
+				    struct irq_fwspec *fwspec,
+				    unsigned long *hwirq,
+				    unsigned int *type)
+{
+	if (is_of_node(fwspec->fwnode)) {
+		if (fwspec->param_count != 2)
+			return -EINVAL;
+
+		if (fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM)
+			return -EINVAL;
+
+		*hwirq = fwspec->param[0];
+
+		/* If there is no valid irq type, just use the default type */
+		if ((fwspec->param[1] == IRQ_TYPE_EDGE_RISING) ||
+			(fwspec->param[1] == IRQ_TYPE_LEVEL_HIGH))
+			*type = fwspec->param[1];
+		else
+			return -EINVAL;
+
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int mbigen_irq_domain_alloc(struct irq_domain *domain,
+					unsigned int virq,
+					unsigned int nr_irqs,
+					void *args)
+{
+	struct irq_fwspec *fwspec = args;
+	irq_hw_number_t hwirq;
+	unsigned int type;
+	struct mbigen_device *mgn_chip;
+	int i, err;
+
+	err = mbigen_domain_translate(domain, fwspec, &hwirq, &type);
+	if (err)
+		return err;
+
+	err = platform_msi_domain_alloc(domain, virq, nr_irqs);
+	if (err)
+		return err;
+
+	mgn_chip = platform_msi_get_host_data(domain);
+
+	for (i = 0; i < nr_irqs; i++)
+		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+				      &mbigen_irq_chip, mgn_chip->base);
+
+	return 0;
+}
+
+static struct irq_domain_ops mbigen_domain_ops = {
+	.translate	= mbigen_domain_translate,
+	.alloc		= mbigen_irq_domain_alloc,
+	.free		= irq_domain_free_irqs_common,
+};
+
 static int mbigen_device_probe(struct platform_device *pdev)
 {
 	struct mbigen_device *mgn_chip;
 	struct resource *res;
+	struct irq_domain *domain;
+	u32 num_pins;
 
 	mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL);
 	if (!mgn_chip)
@@ -48,8 +177,23 @@ static int mbigen_device_probe(struct platform_device *pdev)
 	if (IS_ERR(mgn_chip->base))
 		return PTR_ERR(mgn_chip->base);
 
+	if (of_property_read_u32(pdev->dev.of_node, "num-pins", &num_pins) < 0) {
+		dev_err(&pdev->dev, "No num-pins property\n");
+		return -EINVAL;
+	}
+
+	domain = platform_msi_create_device_domain(&pdev->dev, num_pins,
+							mbigen_write_msg,
+							&mbigen_domain_ops,
+							mgn_chip);
+
+	if (!domain)
+		return -ENOMEM;
+
 	platform_set_drvdata(pdev, mgn_chip);
 
+	dev_info(&pdev->dev, "Allocated %d MSIs\n", num_pins);
+
 	return 0;
 }
 
-- 
1.7.1

[PATCH 5/5] irqchip:implement the mbigen irq chip operation functions

[MaJun]

From: Ma Jun <majun258@huawei.com>

Add the interrupt controller chip operation functions of mbigen chip.

Signed-off-by: Ma Jun <majun258@huawei.com>
---
 drivers/irqchip/irq-mbigen-v1.c |   75 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 75 insertions(+), 0 deletions(-)

diff --git a/drivers/irqchip/irq-mbigen-v1.c b/drivers/irqchip/irq-mbigen-v1.c
index 6bbb82a..8291a47 100644
--- a/drivers/irqchip/irq-mbigen-v1.c
+++ b/drivers/irqchip/irq-mbigen-v1.c
@@ -41,6 +41,20 @@
 #define REG_MBIGEN_EXT_VEC_OFFSET		0x320
 
 /**
+ * offset of clear register in mbigen node
+ * This register is used to clear the status
+ * of interrupt
+ */
+#define REG_MBIGEN_CLEAR_OFFSET		0x100
+
+/**
+ * offset of interrupt type register
+ * This register is used to configure interrupt
+ * trigger type
+ */
+#define REG_MBIGEN_TYPE_OFFSET		0x0
+
+/**
  * struct mbigen_device - holds the information of mbigen device.
  *
  * @pdev:		pointer to the platform device structure of mbigen chip.
@@ -77,8 +91,69 @@ static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
 		return (nid - 4) * 4 + REG_MBIGEN_EXT_VEC_OFFSET;
 }
 
+static inline void get_mbigen_type_reg(irq_hw_number_t hwirq,
+					u32 *mask, u32 *addr)
+{
+	int ofst;
+
+	ofst = hwirq / 32 * 4;
+	*mask = 1 << (hwirq % 32);
+
+	*addr = ofst + REG_MBIGEN_TYPE_OFFSET;
+}
+
+static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq,
+					u32 *mask, u32 *addr)
+{
+	unsigned int ofst;
+
+	ofst = hwirq / 32 * 4;
+
+	*mask = 1 << (hwirq % 32);
+	*addr = ofst + REG_MBIGEN_CLEAR_OFFSET;
+}
+
+static void mbigen_eoi_irq(struct irq_data *data)
+{
+	void __iomem *base = data->chip_data;
+	u32 mask, addr;
+
+	get_mbigen_clear_reg(data->hwirq, &mask, &addr);
+
+	writel_relaxed(mask, base + addr);
+
+	irq_chip_eoi_parent(data);
+}
+
+static int mbigen_set_type(struct irq_data *data, unsigned int type)
+{
+	void __iomem *base = data->chip_data;
+	u32 mask, addr, val;
+
+	if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
+		return -EINVAL;
+
+	get_mbigen_type_reg(data->hwirq, &mask, &addr);
+
+	val = readl_relaxed(base + addr);
+
+	if (type == IRQ_TYPE_LEVEL_HIGH)
+		val |= mask;
+	else
+		val &= ~mask;
+
+	writel_relaxed(val, base + addr);
+
+	return 0;
+}
+
 static struct irq_chip mbigen_irq_chip = {
 	.name =			"mbigen-v1",
+	.irq_mask =		irq_chip_mask_parent,
+	.irq_unmask =		irq_chip_unmask_parent,
+	.irq_eoi =		mbigen_eoi_irq,
+	.irq_set_type =		mbigen_set_type,
+	.irq_set_affinity =	irq_chip_set_affinity_parent,
 };
 
 static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg)
-- 
1.7.1

[PATCH 3/5] irqchip: add platform device driver for mbigen device

[kbuild test robot]

Hi Ma,

[auto build test ERROR on tip/irq/core]
[also build test ERROR on v4.5-rc3 next-20160212]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]

url:    https://github.com/0day-ci/linux/commits/MaJun/irqchip-Add-support-for-Hisilicon-mbigen-v1-chip/20160214-101957
config: arm64-defconfig (attached as .config)
reproduce:
        wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm64 

Note: the linux-review/MaJun/irqchip-Add-support-for-Hisilicon-mbigen-v1-chip/20160214-101957 HEAD 9acb433456cd9671c97c0eeb1ccca8cc3b986081 builds fine.
      It only hurts bisectibility.

All error/warnings (new ones prefixed by >>):

   drivers/irqchip/irq-mbigen-v1.c: In function 'mbigen_device_probe':
>> drivers/irqchip/irq-mbigen-v1.c:47:2: error: implicit declaration of function 'devm_ioremap' [-Werror=implicit-function-declaration]
     mgn_chip->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
     ^
>> drivers/irqchip/irq-mbigen-v1.c:47:17: warning: assignment makes pointer from integer without a cast
     mgn_chip->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
                    ^
   cc1: some warnings being treated as errors

vim +/devm_ioremap +47 drivers/irqchip/irq-mbigen-v1.c

    41		if (!mgn_chip)
    42			return -ENOMEM;
    43	
    44		mgn_chip->pdev = pdev;
    45	
    46		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  > 47		mgn_chip->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
    48		if (IS_ERR(mgn_chip->base))
    49			return PTR_ERR(mgn_chip->base);
    50	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/octet-stream
Size: 21180 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160214/d5d583fd/attachment-0001.obj>