From: ard.biesheuvel@linaro.org (Ard Biesheuvel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6sub1 08/11] arm64: kvm: deal with kernel symbols outside of linear mapping
Date: Tue, 16 Feb 2016 13:52:39 +0100 [thread overview]
Message-ID: <1455627162-31600-9-git-send-email-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <1455627162-31600-1-git-send-email-ard.biesheuvel@linaro.org>
KVM on arm64 uses a fixed offset between the linear mapping at EL1 and
the HYP mapping at EL2. Before we can move the kernel virtual mapping
out of the linear mapping, we have to make sure that references to kernel
symbols that are accessed via the HYP mapping are translated to their
linear equivalent.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm/include/asm/kvm_asm.h | 2 ++
arch/arm/kvm/arm.c | 8 +++++---
arch/arm64/include/asm/kvm_asm.h | 17 +++++++++++++++++
arch/arm64/include/asm/kvm_host.h | 8 +++++---
arch/arm64/kvm/hyp.S | 6 +++---
5 files changed, 32 insertions(+), 9 deletions(-)
diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h
index 194c91b610ff..c35c349da069 100644
--- a/arch/arm/include/asm/kvm_asm.h
+++ b/arch/arm/include/asm/kvm_asm.h
@@ -79,6 +79,8 @@
#define rr_lo_hi(a1, a2) a1, a2
#endif
+#define kvm_ksym_ref(kva) (kva)
+
#ifndef __ASSEMBLY__
struct kvm;
struct kvm_vcpu;
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index dda1959f0dde..975da6cfbf59 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -982,7 +982,7 @@ static void cpu_init_hyp_mode(void *dummy)
pgd_ptr = kvm_mmu_get_httbr();
stack_page = __this_cpu_read(kvm_arm_hyp_stack_page);
hyp_stack_ptr = stack_page + PAGE_SIZE;
- vector_ptr = (unsigned long)__kvm_hyp_vector;
+ vector_ptr = (unsigned long)kvm_ksym_ref(__kvm_hyp_vector);
__cpu_init_hyp_mode(boot_pgd_ptr, pgd_ptr, hyp_stack_ptr, vector_ptr);
@@ -1074,13 +1074,15 @@ static int init_hyp_mode(void)
/*
* Map the Hyp-code called directly from the host
*/
- err = create_hyp_mappings(__kvm_hyp_code_start, __kvm_hyp_code_end);
+ err = create_hyp_mappings(kvm_ksym_ref(__kvm_hyp_code_start),
+ kvm_ksym_ref(__kvm_hyp_code_end));
if (err) {
kvm_err("Cannot map world-switch code\n");
goto out_free_mappings;
}
- err = create_hyp_mappings(__start_rodata, __end_rodata);
+ err = create_hyp_mappings(kvm_ksym_ref(__start_rodata),
+ kvm_ksym_ref(__end_rodata));
if (err) {
kvm_err("Cannot map rodata section\n");
goto out_free_mappings;
diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
index 52b777b7d407..31b56008f412 100644
--- a/arch/arm64/include/asm/kvm_asm.h
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -26,7 +26,24 @@
#define KVM_ARM64_DEBUG_DIRTY_SHIFT 0
#define KVM_ARM64_DEBUG_DIRTY (1 << KVM_ARM64_DEBUG_DIRTY_SHIFT)
+#define kvm_ksym_ref(sym) ((void *)&sym + kvm_ksym_shift)
+
#ifndef __ASSEMBLY__
+#if __GNUC__ > 4
+#define kvm_ksym_shift (PAGE_OFFSET - KIMAGE_VADDR)
+#else
+/*
+ * GCC versions 4.9 and older will fold the constant below into the addend of
+ * the reference to 'sym' above if kvm_ksym_shift is declared static or if the
+ * constant is used directly. However, since we use the small code model for
+ * the core kernel, the reference to 'sym' will be emitted as a adrp/add pair,
+ * with a +/- 4 GB range, resulting in linker relocation errors if the shift
+ * is sufficiently large. So prevent the compiler from folding the shift into
+ * the addend, by making the shift a variable with external linkage.
+ */
+__weak u64 kvm_ksym_shift = PAGE_OFFSET - KIMAGE_VADDR;
+#endif
+
struct kvm;
struct kvm_vcpu;
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 689d4c95e12f..e3d67ff8798b 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -307,7 +307,7 @@ static inline void kvm_arch_mmu_notifier_invalidate_page(struct kvm *kvm,
struct kvm_vcpu *kvm_arm_get_running_vcpu(void);
struct kvm_vcpu * __percpu *kvm_get_running_vcpus(void);
-u64 kvm_call_hyp(void *hypfn, ...);
+u64 __kvm_call_hyp(void *hypfn, ...);
void force_vm_exit(const cpumask_t *mask);
void kvm_mmu_wp_memory_region(struct kvm *kvm, int slot);
@@ -328,8 +328,8 @@ static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr,
* Call initialization code, and switch to the full blown
* HYP code.
*/
- kvm_call_hyp((void *)boot_pgd_ptr, pgd_ptr,
- hyp_stack_ptr, vector_ptr);
+ __kvm_call_hyp((void *)boot_pgd_ptr, pgd_ptr,
+ hyp_stack_ptr, vector_ptr);
}
static inline void kvm_arch_hardware_disable(void) {}
@@ -343,4 +343,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu);
+#define kvm_call_hyp(f, ...) __kvm_call_hyp(kvm_ksym_ref(f), ##__VA_ARGS__)
+
#endif /* __ARM64_KVM_HOST_H__ */
diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
index 0ccdcbbef3c2..870578f84b1c 100644
--- a/arch/arm64/kvm/hyp.S
+++ b/arch/arm64/kvm/hyp.S
@@ -20,7 +20,7 @@
#include <asm/assembler.h>
/*
- * u64 kvm_call_hyp(void *hypfn, ...);
+ * u64 __kvm_call_hyp(void *hypfn, ...);
*
* This is not really a variadic function in the classic C-way and care must
* be taken when calling this to ensure parameters are passed in registers
@@ -37,7 +37,7 @@
* used to implement __hyp_get_vectors in the same way as in
* arch/arm64/kernel/hyp_stub.S.
*/
-ENTRY(kvm_call_hyp)
+ENTRY(__kvm_call_hyp)
hvc #0
ret
-ENDPROC(kvm_call_hyp)
+ENDPROC(__kvm_call_hyp)
--
2.5.0
next prev parent reply other threads:[~2016-02-16 12:52 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-16 12:52 [PATCH v6sub1 00/11] arm64: split linear and kernel mappings Ard Biesheuvel
2016-02-16 12:52 ` [PATCH v6sub1 01/11] of/fdt: make memblock minimum physical address arch configurable Ard Biesheuvel
2016-02-16 12:52 ` [PATCH v6sub1 02/11] of/fdt: factor out assignment of initrd_start/initrd_end Ard Biesheuvel
2016-02-16 17:28 ` Rob Herring
2016-02-16 12:52 ` [PATCH v6sub1 03/11] arm64: prevent potential circular header dependencies in asm/bug.h Ard Biesheuvel
2016-02-16 12:52 ` [PATCH v6sub1 04/11] arm64: add support for ioremap() block mappings Ard Biesheuvel
2016-02-16 12:52 ` [PATCH v6sub1 05/11] arm64: introduce KIMAGE_VADDR as the virtual base of the kernel region Ard Biesheuvel
2016-02-16 12:52 ` [PATCH v6sub1 06/11] arm64: pgtable: implement static [pte|pmd|pud]_offset variants Ard Biesheuvel
2016-02-16 12:52 ` [PATCH v6sub1 07/11] arm64: decouple early fixmap init from linear mapping Ard Biesheuvel
2016-02-16 12:52 ` Ard Biesheuvel [this message]
2016-02-16 12:52 ` [PATCH v6sub1 09/11] arm64: move kernel image to base of vmalloc area Ard Biesheuvel
2016-02-16 12:52 ` [PATCH v6sub1 10/11] arm64: defer __va translation of initrd_start and initrd_end Ard Biesheuvel
2016-02-16 12:52 ` [PATCH v6sub1 11/11] arm64: allow kernel Image to be loaded anywhere in physical memory Ard Biesheuvel
2016-02-18 18:25 ` [PATCH v6sub1 00/11] arm64: split linear and kernel mappings Catalin Marinas
2016-02-18 18:27 ` Ard Biesheuvel
2016-02-18 19:38 ` Ard Biesheuvel
2016-02-19 8:05 ` Ard Biesheuvel
2016-02-19 14:25 ` Catalin Marinas
2016-02-19 14:27 ` Ard Biesheuvel
2016-02-19 14:29 ` Ard Biesheuvel
2016-02-19 14:37 ` Catalin Marinas
2016-02-19 14:40 ` Ard Biesheuvel
2016-02-19 14:57 ` Catalin Marinas
2016-02-19 17:34 ` Catalin Marinas
2016-02-19 17:38 ` Ard Biesheuvel
2016-02-19 17:43 ` Catalin Marinas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455627162-31600-9-git-send-email-ard.biesheuvel@linaro.org \
--to=ard.biesheuvel@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).