From: linus.walleij@linaro.org (Linus Walleij)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3 v2] irqchip: gic/realview: support more RealView DCC variants
Date: Mon, 22 Feb 2016 15:01:01 +0100 [thread overview]
Message-ID: <1456149661-19118-1-git-send-email-linus.walleij@linaro.org> (raw)
In the add-on file for the GIC dealing with the RealView family
we currently only handle the PB11MPCore, let's extend this to
manage the RealView EB ARM11MPCore as well. The Revision B of the
ARM11MPCore core tile is a bit special and needs special handling
as it moves a system control register around at random.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: devicetree at vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Detect syscon register location based on the syscon compatible
string instead of the GIC compatible string, just define one
compatible string for the 11mp test chip GIC.
- Consistently return -ENODEV
This can be applied in isolation from the other patches so Marc
one you're happy with it, please take it into the IRQchip tree.
---
.../bindings/interrupt-controller/arm,gic.txt | 1 +
drivers/irqchip/irq-gic-realview.c | 44 +++++++++++++++++++---
2 files changed, 39 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
index 5a1cb4bc3dfe..793c20ff8fcc 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
@@ -16,6 +16,7 @@ Main node required properties:
"arm,cortex-a15-gic"
"arm,cortex-a7-gic"
"arm,cortex-a9-gic"
+ "arm,eb11mp-gic"
"arm,gic-400"
"arm,pl390"
"arm,tc11mp-gic"
diff --git a/drivers/irqchip/irq-gic-realview.c b/drivers/irqchip/irq-gic-realview.c
index aa46eb280a7f..54c296401525 100644
--- a/drivers/irqchip/irq-gic-realview.c
+++ b/drivers/irqchip/irq-gic-realview.c
@@ -10,7 +10,8 @@
#include <linux/irqchip/arm-gic.h>
#define REALVIEW_SYS_LOCK_OFFSET 0x20
-#define REALVIEW_PB11MP_SYS_PLD_CTRL1 0x74
+#define REALVIEW_SYS_PLD_CTRL1 0x74
+#define REALVIEW_EB_REVB_SYS_PLD_CTRL1 0xD8
#define VERSATILE_LOCK_VAL 0xA05F
#define PLD_INTMODE_MASK BIT(22)|BIT(23)|BIT(24)
#define PLD_INTMODE_LEGACY 0x0
@@ -18,26 +19,57 @@
#define PLD_INTMODE_NEW_NO_DCC BIT(23)
#define PLD_INTMODE_FIQ_ENABLE BIT(24)
+/* For some reason RealView EB Rev B moved this register */
+static const struct of_device_id syscon_pldset_of_match[] = {
+ {
+ .compatible = "arm,realview-eb11mp-revb-syscon",
+ .data = (void *)REALVIEW_EB_REVB_SYS_PLD_CTRL1,
+ },
+ {
+ .compatible = "arm,realview-eb11mp-revc-syscon",
+ .data = (void *)REALVIEW_SYS_PLD_CTRL1,
+ },
+ {
+ .compatible = "arm,realview-eb-syscon",
+ .data = (void *)REALVIEW_SYS_PLD_CTRL1,
+ },
+ {
+ .compatible = "arm,realview-pb11mp-syscon",
+ .data = (void *)REALVIEW_SYS_PLD_CTRL1,
+ },
+ {},
+};
+
static int __init
realview_gic_of_init(struct device_node *node, struct device_node *parent)
{
static struct regmap *map;
+ struct device_node *np;
+ const struct of_device_id *gic_id;
+ u32 pld1_ctrl;
+
+ np = of_find_matching_node_and_match(NULL, syscon_pldset_of_match,
+ &gic_id);
+ if (!np)
+ return -ENODEV;
+ pld1_ctrl = (u32)gic_id->data;
/* The PB11MPCore GIC needs to be configured in the syscon */
- map = syscon_regmap_lookup_by_compatible("arm,realview-pb11mp-syscon");
+ map = syscon_node_to_regmap(np);
if (!IS_ERR(map)) {
/* new irq mode with no DCC */
regmap_write(map, REALVIEW_SYS_LOCK_OFFSET,
VERSATILE_LOCK_VAL);
- regmap_update_bits(map, REALVIEW_PB11MP_SYS_PLD_CTRL1,
+ regmap_update_bits(map, pld1_ctrl,
PLD_INTMODE_NEW_NO_DCC,
PLD_INTMODE_MASK);
regmap_write(map, REALVIEW_SYS_LOCK_OFFSET, 0x0000);
- pr_info("TC11MP GIC: set up interrupt controller to NEW mode, no DCC\n");
+ pr_info("RealView GIC: set up interrupt controller to NEW mode, no DCC\n");
} else {
- pr_err("TC11MP GIC setup: could not find syscon\n");
- return -ENXIO;
+ pr_err("RealView GIC setup: could not find syscon\n");
+ return -ENODEV;
}
return gic_of_init(node, parent);
}
IRQCHIP_DECLARE(armtc11mp_gic, "arm,tc11mp-gic", realview_gic_of_init);
+IRQCHIP_DECLARE(armeb11mp_gic, "arm,eb11mp-gic", realview_gic_of_init);
--
2.4.3
next reply other threads:[~2016-02-22 14:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-22 14:01 Linus Walleij [this message]
2016-02-23 21:52 ` [PATCH 1/3 v2] irqchip: gic/realview: support more RealView DCC variants Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456149661-19118-1-git-send-email-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).