From mboxrd@z Thu Jan 1 00:00:00 1970 From: andre.przywara@arm.com (Andre Przywara) Date: Mon, 22 Feb 2016 18:20:47 +0000 Subject: [PATCH v3 02/10] ARM: dts: sunxi: make PLL8 in the H3 a proper clock In-Reply-To: <1456165255-31013-1-git-send-email-andre.przywara@arm.com> References: <1456165255-31013-1-git-send-email-andre.przywara@arm.com> Message-ID: <1456165255-31013-3-git-send-email-andre.przywara@arm.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Now that we can reuse the A31 PLL6 clock driver for clocks other then PLL6 itself, describe the PLL8 clock properly. Signed-off-by: Andre Przywara --- arch/arm/boot/dts/sun8i-h3.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 3ba65c2..d84ea9b 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -137,12 +137,12 @@ clock-output-names = "pll6d2"; }; - /* dummy clock until pll6 can be reused */ - pll8: pll8_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <1>; - clock-output-names = "pll8"; + pll8: clk at c01c20044 { + #clock-cells = <1>; + compatible = "allwinner,sun6i-a31-pll6-clk"; + reg = <0x01c20044 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll8", "pll8x2"; }; cpu: cpu_clk at 01c20050 { @@ -243,7 +243,7 @@ #clock-cells = <1>; compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; + clocks = <&osc24M>, <&pll6 0>, <&pll8 0>; clock-output-names = "mmc0", "mmc0_output", "mmc0_sample"; @@ -253,7 +253,7 @@ #clock-cells = <1>; compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; + clocks = <&osc24M>, <&pll6 0>, <&pll8 0>; clock-output-names = "mmc1", "mmc1_output", "mmc1_sample"; @@ -263,7 +263,7 @@ #clock-cells = <1>; compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; + clocks = <&osc24M>, <&pll6 0>, <&pll8 0>; clock-output-names = "mmc2", "mmc2_output", "mmc2_sample"; -- 2.6.4