[RESEND PATCH] clk: rockchip: include downstream muxes into fractional dividers on rk3368

linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed

From: zhangqing@rock-chips.com (Elaine Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH] clk: rockchip: include downstream muxes into fractional dividers on rk3368
Date: Wed, 24 Feb 2016 08:44:11 +0800	[thread overview]
Message-ID: <1456274651-23202-1-git-send-email-zhangqing@rock-chips.com> (raw)

During the initial conversion to the newly introduced combined fractional
dividers+muxes the rk3368 clocks were left out, so convert them now.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 drivers/clk/rockchip/clk-rk3368.c | 97 ++++++++++++++++++++++++---------------
 1 file changed, 60 insertions(+), 37 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3368.c b/drivers/clk/rockchip/clk-rk3368.c
index c2b0421..a2bb122 100644
--- a/drivers/clk/rockchip/clk-rk3368.c
+++ b/drivers/clk/rockchip/clk-rk3368.c
@@ -243,6 +243,34 @@ static struct rockchip_cpuclk_rate_table rk3368_cpuclkl_rates[] __initdata = {
 	RK3368_CPUCLKL_RATE( 312000000, 1, 1, 1),
 };
 
+static struct rockchip_clk_branch rk3368_i2s_8ch_fracmux __initdata =
+	MUX(0, "i2s_8ch_pre", mux_i2s_8ch_pre_p, CLK_SET_RATE_PARENT,
+	    RK3368_CLKSEL_CON(27), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk3368_spdif_8ch_fracmux __initdata =
+	MUX(0, "spdif_8ch_pre", mux_spdif_8ch_p, CLK_SET_RATE_PARENT,
+	    RK3368_CLKSEL_CON(31), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk3368_i2s_2ch_fracmux __initdata =
+	MUX(0, "i2s_2ch_pre", mux_i2s_2ch_p, CLK_SET_RATE_PARENT,
+	    RK3368_CLKSEL_CON(53), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk3368_uart0_fracmux __initdata =
+	MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, CLK_SET_RATE_PARENT,
+	    RK3368_CLKSEL_CON(33), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk3368_uart1_fracmux __initdata =
+	MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, CLK_SET_RATE_PARENT,
+	    RK3368_CLKSEL_CON(35), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk3368_uart3_fracmux __initdata =
+	MUX(SCLK_UART3, "sclk_uart3", mux_uart3_p, CLK_SET_RATE_PARENT,
+	    RK3368_CLKSEL_CON(39), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk3368_uart4_fracmux __initdata =
+	MUX(SCLK_UART4, "sclk_uart4", mux_uart4_p, CLK_SET_RATE_PARENT,
+	    RK3368_CLKSEL_CON(41), 8, 2, MFLAGS);
+
 static struct rockchip_clk_branch rk3368_clk_branches[] __initdata = {
 	/*
 	 * Clock-Architecture Diagram 2
@@ -339,11 +367,10 @@ static struct rockchip_clk_branch rk3368_clk_branches[] __initdata = {
 	COMPOSITE(0, "i2s_8ch_src", mux_pll_src_cpll_gpll_p, 0,
 			RK3368_CLKSEL_CON(27), 12, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3368_CLKGATE_CON(6), 1, GFLAGS),
-	COMPOSITE_FRAC(0, "i2s_8ch_frac", "i2s_8ch_src", CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(28), 0,
-			RK3368_CLKGATE_CON(6), 2, GFLAGS),
-	MUX(0, "i2s_8ch_pre", mux_i2s_8ch_pre_p, CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(27), 8, 2, MFLAGS),
+	COMPOSITE_FRACMUX(0, "i2s_8ch_frac", "i2s_8ch_src", CLK_SET_RATE_PARENT,
+			  RK3368_CLKSEL_CON(28), 0,
+			  RK3368_CLKGATE_CON(6), 2, GFLAGS,
+			  &rk3368_i2s_8ch_fracmux),
 	COMPOSITE_NODIV(SCLK_I2S_8CH_OUT, "i2s_8ch_clkout", mux_i2s_8ch_clkout_p, 0,
 			RK3368_CLKSEL_CON(27), 15, 1, MFLAGS,
 			RK3368_CLKGATE_CON(6), 0, GFLAGS),
@@ -352,21 +379,21 @@ static struct rockchip_clk_branch rk3368_clk_branches[] __initdata = {
 	COMPOSITE(0, "spdif_8ch_src", mux_pll_src_cpll_gpll_p, 0,
 			RK3368_CLKSEL_CON(31), 12, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3368_CLKGATE_CON(6), 4, GFLAGS),
-	COMPOSITE_FRAC(0, "spdif_8ch_frac", "spdif_8ch_src", CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(32), 0,
-			RK3368_CLKGATE_CON(6), 5, GFLAGS),
-	COMPOSITE_NODIV(SCLK_SPDIF_8CH, "sclk_spdif_8ch", mux_spdif_8ch_p, CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(31), 8, 2, MFLAGS,
-			RK3368_CLKGATE_CON(6), 6, GFLAGS),
+	COMPOSITE_FRACMUX(0, "spdif_8ch_frac", "spdif_8ch_src", CLK_SET_RATE_PARENT,
+			  RK3368_CLKSEL_CON(32), 0,
+			  RK3368_CLKGATE_CON(6), 5, GFLAGS,
+			  &rk3368_spdif_8ch_fracmux),
+	GATE(SCLK_SPDIF_8CH, "sclk_spdif_8ch", "spdif_8ch_pre", CLK_SET_RATE_PARENT,
+	     RK3368_CLKGATE_CON(6), 6, GFLAGS),
 	COMPOSITE(0, "i2s_2ch_src", mux_pll_src_cpll_gpll_p, 0,
 			RK3368_CLKSEL_CON(53), 12, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3368_CLKGATE_CON(5), 13, GFLAGS),
-	COMPOSITE_FRAC(0, "i2s_2ch_frac", "i2s_2ch_src", CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(54), 0,
-			RK3368_CLKGATE_CON(5), 14, GFLAGS),
-	COMPOSITE_NODIV(SCLK_I2S_2CH, "sclk_i2s_2ch", mux_i2s_2ch_p, CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(53), 8, 2, MFLAGS,
-			RK3368_CLKGATE_CON(5), 15, GFLAGS),
+	COMPOSITE_FRACMUX(0, "i2s_2ch_frac", "i2s_2ch_src", CLK_SET_RATE_PARENT,
+			  RK3368_CLKSEL_CON(54), 0,
+			  RK3368_CLKGATE_CON(5), 14, GFLAGS,
+			  &rk3368_i2s_2ch_fracmux),
+	GATE(SCLK_I2S_2CH, "sclk_i2s_2ch", "i2s_2ch_pre", CLK_SET_RATE_PARENT,
+	     RK3368_CLKGATE_CON(5), 15, GFLAGS),
 
 	COMPOSITE(0, "sclk_tsp", mux_pll_src_cpll_gpll_npll_p, 0,
 			RK3368_CLKSEL_CON(46), 6, 2, MFLAGS, 0, 5, DFLAGS,
@@ -562,38 +589,34 @@ static struct rockchip_clk_branch rk3368_clk_branches[] __initdata = {
 	COMPOSITE(0, "uart0_src", mux_pll_src_cpll_gpll_usb_usb_p, 0,
 			RK3368_CLKSEL_CON(33), 12, 2, MFLAGS, 0, 7, DFLAGS,
 			RK3368_CLKGATE_CON(2), 0, GFLAGS),
-	COMPOSITE_FRAC(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(34), 0,
-			RK3368_CLKGATE_CON(2), 1, GFLAGS),
-	MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(33), 8, 2, MFLAGS),
+	COMPOSITE_FRACMUX(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
+			  RK3368_CLKSEL_CON(34), 0,
+			  RK3368_CLKGATE_CON(2), 1, GFLAGS,
+			  &rk3368_uart0_fracmux),
 
 	COMPOSITE_NOMUX(0, "uart1_src", "uart_src", 0,
 			RK3368_CLKSEL_CON(35), 0, 7, DFLAGS,
 			RK3368_CLKGATE_CON(2), 2, GFLAGS),
-	COMPOSITE_FRAC(0, "uart1_frac", "uart1_src", CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(36), 0,
-			RK3368_CLKGATE_CON(2), 3, GFLAGS),
-	MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(35), 8, 2, MFLAGS),
+	COMPOSITE_FRACMUX(0, "uart1_frac", "uart1_src", CLK_SET_RATE_PARENT,
+			  RK3368_CLKSEL_CON(36), 0,
+			  RK3368_CLKGATE_CON(2), 3, GFLAGS,
+			  &rk3368_uart1_fracmux),
 
 	COMPOSITE_NOMUX(0, "uart3_src", "uart_src", 0,
 			RK3368_CLKSEL_CON(39), 0, 7, DFLAGS,
 			RK3368_CLKGATE_CON(2), 6, GFLAGS),
-	COMPOSITE_FRAC(0, "uart3_frac", "uart3_src", CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(40), 0,
-			RK3368_CLKGATE_CON(2), 7, GFLAGS),
-	MUX(SCLK_UART3, "sclk_uart3", mux_uart3_p, CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(39), 8, 2, MFLAGS),
+	COMPOSITE_FRACMUX(0, "uart3_frac", "uart3_src", CLK_SET_RATE_PARENT,
+			  RK3368_CLKSEL_CON(40), 0,
+			  RK3368_CLKGATE_CON(2), 7, GFLAGS,
+			  &rk3368_uart3_fracmux),
 
 	COMPOSITE_NOMUX(0, "uart4_src", "uart_src", 0,
 			RK3368_CLKSEL_CON(41), 0, 7, DFLAGS,
 			RK3368_CLKGATE_CON(2), 8, GFLAGS),
-	COMPOSITE_FRAC(0, "uart4_frac", "uart4_src", CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(42), 0,
-			RK3368_CLKGATE_CON(2), 9, GFLAGS),
-	MUX(SCLK_UART4, "sclk_uart4", mux_uart4_p, CLK_SET_RATE_PARENT,
-			RK3368_CLKSEL_CON(41), 8, 2, MFLAGS),
+	COMPOSITE_FRACMUX(0, "uart4_frac", "uart4_src", CLK_SET_RATE_PARENT,
+			  RK3368_CLKSEL_CON(42), 0,
+			  RK3368_CLKGATE_CON(2), 9, GFLAGS,
+			  &rk3368_uart4_fracmux),
 
 	COMPOSITE(0, "mac_pll_src", mux_pll_src_npll_cpll_gpll_p, 0,
 			RK3368_CLKSEL_CON(43), 6, 2, MFLAGS, 0, 5, DFLAGS,
-- 
1.9.1

next             reply	other threads:[~2016-02-24  0:44 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-24  0:44 Elaine Zhang [this message]
2016-02-26  1:13 ` [RESEND PATCH] clk: rockchip: include downstream muxes into fractional dividers on rk3368 Heiko Stuebner

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:c2b0421 dfblob:a2bb122 )
 OR (
bs:"[RESEND PATCH] clk: rockchip: include downstream muxes into fractional dividers on rk3368" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456274651-23202-1-git-send-email-zhangqing@rock-chips.com \
    --to=zhangqing@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).