From: zhangqing@rock-chips.com (Elaine Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/6] power-domain: allow domains only handling idle requests
Date: Thu, 25 Feb 2016 10:12:13 +0800 [thread overview]
Message-ID: <1456366337-10808-3-git-send-email-zhangqing@rock-chips.com> (raw)
In-Reply-To: <1456366337-10808-1-git-send-email-zhangqing@rock-chips.com>
On some Rockchip SoC there exist child-domains only handling their
idle state with the actual power-state handled by a parent-domain.
So allow such types of domains. For them, we can determine their
state (on/of) by checking the inverse idle-state instead.
There exist one special case if both idle as well power handling
were set as not present, but as the domain-data is defined in the
code itself, we can expect the reasonable developer to define them
So allow such types of domains. For them, we can determine their
state (on/of) by checking the inverse idle-state instead.
There exist one special case if both idle as well power handling
were set as not present, but as the domain-data is defined in the
code itself, we can expect the reasonable developer to define them
in a correct, without adding more checks.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
drivers/soc/rockchip/pm_domains.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/rockchip/pm_domains.c b/drivers/soc/rockchip/pm_domains.c
index 50c0641..d0990a3 100644
--- a/drivers/soc/rockchip/pm_domains.c
+++ b/drivers/soc/rockchip/pm_domains.c
@@ -66,8 +66,8 @@ struct rockchip_pmu {
#define DOMAIN(pwr, status, req, idle, ack) \
{ \
- .pwr_mask = BIT(pwr), \
- .status_mask = BIT(status), \
+ .pwr_mask = (pwr >= 0) ? BIT(pwr) : 0, \
+ .status_mask = (status >= 0) ? BIT(status) : 0, \
.req_mask = (req >= 0) ? BIT(req) : 0, \
.idle_mask = (idle >= 0) ? BIT(idle) : 0, \
.ack_mask = (ack >= 0) ? BIT(ack) : 0, \
@@ -119,6 +119,10 @@ static bool rockchip_pmu_domain_is_on(struct rockchip_pm_domain *pd)
struct rockchip_pmu *pmu = pd->pmu;
unsigned int val;
+ /* check idle status for idle-only domains */
+ if (pd->info->status_mask <= 0)
+ return !rockchip_pmu_domain_is_idle(pd);
+
regmap_read(pmu->regmap, pmu->info->status_offset, &val);
/* 1'b0: power on, 1'b1: power off */
@@ -130,6 +134,9 @@ static void rockchip_do_pmu_set_power_domain(struct rockchip_pm_domain *pd,
{
struct rockchip_pmu *pmu = pd->pmu;
+ if (pd->info->pwr_mask <= 0)
+ return;
+
regmap_update_bits(pmu->regmap, pmu->info->pwr_offset,
pd->info->pwr_mask, on ? 0 : -1U);
--
1.9.1
next prev parent reply other threads:[~2016-02-25 2:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 2:12 [PATCH v3 0/6] rockchip: power-domain: fix pm domain for support RK3399 SoC Elaine Zhang
2016-02-25 2:12 ` [PATCH v3 1/6] rockchip: power-domain: make idle handling optional Elaine Zhang
2016-02-25 2:12 ` Elaine Zhang [this message]
2016-02-25 2:12 ` [PATCH v3 3/6] rockchip: power-domain: add support for sub-power domains Elaine Zhang
2016-02-25 2:12 ` [PATCH v3 4/6] dt/bindings: power: add RK3399 SoCs header for power-domain Elaine Zhang
2016-02-25 2:15 ` [PATCH v3 5/6] rockchip: power-domain: Modify power domain driver for rk3399 Elaine Zhang
2016-02-25 2:16 ` [PATCH v3 6/6] dt/bindings: rockchip: modify document of Rockchip power domains Elaine Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456366337-10808-3-git-send-email-zhangqing@rock-chips.com \
--to=zhangqing@rock-chips.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).