From: ard.biesheuvel@linaro.org (Ard Biesheuvel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] arm64: lse: deal with clobbered x16 register after branch via PLT
Date: Thu, 25 Feb 2016 20:48:53 +0100 [thread overview]
Message-ID: <1456429733-20825-1-git-send-email-ard.biesheuvel@linaro.org> (raw)
The LSE atomics implementation uses runtime patching to patch in calls
to out of line non-LSE atomics implementations on cores that lack hardware
support for LSE. To avoid paying the overhead cost of a function call even
if no call ends up being made, the bl instruction is kept invisible to the
compiler, and the out of line implementations preserve all registers, not
just the ones that they are required to preserve as per the AAPCS64.
However, commit fd045f6cd98e ("arm64: add support for module PLTs") added
support for routing branch instructions via veneers if the branch target
offset exceeds the range of the ordinary relative branch instructions.
Since this deals with jump and call instructions that are exposed to ELF
relocations, the PLT code uses x16 to hold the address of the branch target
when it performs an indirect branch-to-register, something which is
explicitly allowed by the AAPCS64 (and ordinary compiler generated code
does not expect register x16 or x17 to retain their values across a bl
instruction).
Since the lse runtime patched bl instructions don't adhere to the AAPCS64,
they don't deal with this clobbering of registers x16 and x17. So add them
to the clobber list of the asm() statements that perform the call
instructions, and drop x16 and x17 from the list of registers that are
caller saved in the out of line non-LSE implementations.
In addition, since we have given these functions two scratch registers,
they no longer need to stack/unstack temp registers, and the only remaining
stack accesses are for the frame pointer. So pass -fomit-frame-pointer as
well, this eliminates all stack accesses from these functions.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
v2: added x17 and -fomit-frame-pointer
Before:
0000000000000000 <__ll_sc_atomic_add>:
0: a9be7bfd stp x29, x30, [sp,#-32]!
4: 910003fd mov x29, sp
8: f9000be8 str x8, [sp,#16]
c: f9800031 prfm pstl1strm, [x1]
10: 885f7c28 ldxr w8, [x1]
14: 0b000108 add w8, w8, w0
18: 881e7c28 stxr w30, w8, [x1]
1c: 35ffffbe cbnz w30, 10 <__ll_sc_atomic_add+0x10>
20: f9400be8 ldr x8, [sp,#16]
24: a8c27bfd ldp x29, x30, [sp],#32
28: d65f03c0 ret
2c: d503201f nop
After:
0000000000000000 <__ll_sc_atomic_add>:
0: f9800031 prfm pstl1strm, [x1]
4: 885f7c31 ldxr w17, [x1]
8: 0b000231 add w17, w17, w0
c: 88107c31 stxr w16, w17, [x1]
10: 35ffffb0 cbnz w16, 4 <__ll_sc_atomic_add+0x4>
14: d65f03c0 ret
arch/arm64/include/asm/atomic_lse.h | 38 ++++++++++----------
arch/arm64/lib/Makefile | 2 +-
2 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h
index 197e06afbf71..7af60139f718 100644
--- a/arch/arm64/include/asm/atomic_lse.h
+++ b/arch/arm64/include/asm/atomic_lse.h
@@ -36,7 +36,7 @@ static inline void atomic_andnot(int i, atomic_t *v)
" stclr %w[i], %[v]\n")
: [i] "+r" (w0), [v] "+Q" (v->counter)
: "r" (x1)
- : "x30");
+ : "x16", "x17", "x30");
}
static inline void atomic_or(int i, atomic_t *v)
@@ -48,7 +48,7 @@ static inline void atomic_or(int i, atomic_t *v)
" stset %w[i], %[v]\n")
: [i] "+r" (w0), [v] "+Q" (v->counter)
: "r" (x1)
- : "x30");
+ : "x16", "x17", "x30");
}
static inline void atomic_xor(int i, atomic_t *v)
@@ -60,7 +60,7 @@ static inline void atomic_xor(int i, atomic_t *v)
" steor %w[i], %[v]\n")
: [i] "+r" (w0), [v] "+Q" (v->counter)
: "r" (x1)
- : "x30");
+ : "x16", "x17", "x30");
}
static inline void atomic_add(int i, atomic_t *v)
@@ -72,7 +72,7 @@ static inline void atomic_add(int i, atomic_t *v)
" stadd %w[i], %[v]\n")
: [i] "+r" (w0), [v] "+Q" (v->counter)
: "r" (x1)
- : "x30");
+ : "x16", "x17", "x30");
}
#define ATOMIC_OP_ADD_RETURN(name, mb, cl...) \
@@ -90,7 +90,7 @@ static inline int atomic_add_return##name(int i, atomic_t *v) \
" add %w[i], %w[i], w30") \
: [i] "+r" (w0), [v] "+Q" (v->counter) \
: "r" (x1) \
- : "x30" , ##cl); \
+ : "x16", "x17", "x30", ##cl); \
\
return w0; \
}
@@ -116,7 +116,7 @@ static inline void atomic_and(int i, atomic_t *v)
" stclr %w[i], %[v]")
: [i] "+r" (w0), [v] "+Q" (v->counter)
: "r" (x1)
- : "x30");
+ : "x16", "x17", "x30");
}
static inline void atomic_sub(int i, atomic_t *v)
@@ -133,7 +133,7 @@ static inline void atomic_sub(int i, atomic_t *v)
" stadd %w[i], %[v]")
: [i] "+r" (w0), [v] "+Q" (v->counter)
: "r" (x1)
- : "x30");
+ : "x16", "x17", "x30");
}
#define ATOMIC_OP_SUB_RETURN(name, mb, cl...) \
@@ -153,7 +153,7 @@ static inline int atomic_sub_return##name(int i, atomic_t *v) \
" add %w[i], %w[i], w30") \
: [i] "+r" (w0), [v] "+Q" (v->counter) \
: "r" (x1) \
- : "x30" , ##cl); \
+ : "x16", "x17", "x30" , ##cl); \
\
return w0; \
}
@@ -177,7 +177,7 @@ static inline void atomic64_andnot(long i, atomic64_t *v)
" stclr %[i], %[v]\n")
: [i] "+r" (x0), [v] "+Q" (v->counter)
: "r" (x1)
- : "x30");
+ : "x16", "x17", "x30");
}
static inline void atomic64_or(long i, atomic64_t *v)
@@ -189,7 +189,7 @@ static inline void atomic64_or(long i, atomic64_t *v)
" stset %[i], %[v]\n")
: [i] "+r" (x0), [v] "+Q" (v->counter)
: "r" (x1)
- : "x30");
+ : "x16", "x17", "x30");
}
static inline void atomic64_xor(long i, atomic64_t *v)
@@ -201,7 +201,7 @@ static inline void atomic64_xor(long i, atomic64_t *v)
" steor %[i], %[v]\n")
: [i] "+r" (x0), [v] "+Q" (v->counter)
: "r" (x1)
- : "x30");
+ : "x16", "x17", "x30");
}
static inline void atomic64_add(long i, atomic64_t *v)
@@ -213,7 +213,7 @@ static inline void atomic64_add(long i, atomic64_t *v)
" stadd %[i], %[v]\n")
: [i] "+r" (x0), [v] "+Q" (v->counter)
: "r" (x1)
- : "x30");
+ : "x16", "x17", "x30");
}
#define ATOMIC64_OP_ADD_RETURN(name, mb, cl...) \
@@ -231,7 +231,7 @@ static inline long atomic64_add_return##name(long i, atomic64_t *v) \
" add %[i], %[i], x30") \
: [i] "+r" (x0), [v] "+Q" (v->counter) \
: "r" (x1) \
- : "x30" , ##cl); \
+ : "x16", "x17", "x30", ##cl); \
\
return x0; \
}
@@ -257,7 +257,7 @@ static inline void atomic64_and(long i, atomic64_t *v)
" stclr %[i], %[v]")
: [i] "+r" (x0), [v] "+Q" (v->counter)
: "r" (x1)
- : "x30");
+ : "x16", "x17", "x30");
}
static inline void atomic64_sub(long i, atomic64_t *v)
@@ -274,7 +274,7 @@ static inline void atomic64_sub(long i, atomic64_t *v)
" stadd %[i], %[v]")
: [i] "+r" (x0), [v] "+Q" (v->counter)
: "r" (x1)
- : "x30");
+ : "x16", "x17", "x30");
}
#define ATOMIC64_OP_SUB_RETURN(name, mb, cl...) \
@@ -294,7 +294,7 @@ static inline long atomic64_sub_return##name(long i, atomic64_t *v) \
" add %[i], %[i], x30") \
: [i] "+r" (x0), [v] "+Q" (v->counter) \
: "r" (x1) \
- : "x30" , ##cl); \
+ : "x16", "x17", "x30", ##cl); \
\
return x0; \
}
@@ -330,7 +330,7 @@ static inline long atomic64_dec_if_positive(atomic64_t *v)
"2:")
: [ret] "+&r" (x0), [v] "+Q" (v->counter)
:
- : "x30", "cc", "memory");
+ : "x16", "x17", "x30", "cc", "memory");
return x0;
}
@@ -359,7 +359,7 @@ static inline unsigned long __cmpxchg_case_##name(volatile void *ptr, \
" mov %" #w "[ret], " #w "30") \
: [ret] "+r" (x0), [v] "+Q" (*(unsigned long *)ptr) \
: [old] "r" (x1), [new] "r" (x2) \
- : "x30" , ##cl); \
+ : "x16", "x17", "x30", ##cl); \
\
return x0; \
}
@@ -416,7 +416,7 @@ static inline long __cmpxchg_double##name(unsigned long old1, \
[v] "+Q" (*(unsigned long *)ptr) \
: [new1] "r" (x2), [new2] "r" (x3), [ptr] "r" (x4), \
[oldval1] "r" (oldval1), [oldval2] "r" (oldval2) \
- : "x30" , ##cl); \
+ : "x16", "x17", "x30", ##cl); \
\
return x0; \
}
diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile
index 1a811ecf71da..d323a82c4ac3 100644
--- a/arch/arm64/lib/Makefile
+++ b/arch/arm64/lib/Makefile
@@ -15,4 +15,4 @@ CFLAGS_atomic_ll_sc.o := -fcall-used-x0 -ffixed-x1 -ffixed-x2 \
-ffixed-x7 -fcall-saved-x8 -fcall-saved-x9 \
-fcall-saved-x10 -fcall-saved-x11 -fcall-saved-x12 \
-fcall-saved-x13 -fcall-saved-x14 -fcall-saved-x15 \
- -fcall-saved-x16 -fcall-saved-x17 -fcall-saved-x18
+ -fcall-saved-x18 -fomit-frame-pointer
--
2.5.0
next reply other threads:[~2016-02-25 19:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 19:48 Ard Biesheuvel [this message]
2016-02-25 22:09 ` [PATCH v2] arm64: lse: deal with clobbered x16 register after branch via PLT Ard Biesheuvel
2016-02-26 10:03 ` Will Deacon
2016-02-26 10:04 ` Ard Biesheuvel
2016-02-26 10:14 ` Will Deacon
2016-02-26 10:25 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456429733-20825-1-git-send-email-ard.biesheuvel@linaro.org \
--to=ard.biesheuvel@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox