From mboxrd@z Thu Jan  1 00:00:00 1970
From: slemieux.tyco@gmail.com (Sylvain Lemieux)
Date: Fri, 26 Feb 2016 11:50:35 -0500
Subject: [PATCH v4 0/6] watchdog: pnx4008: add restart handler
In-Reply-To: <56D07394.8030107@roeck-us.net>
References: <1456425100-28136-1-git-send-email-slemieux.tyco@gmail.com>
 <56D062DD.1060707@roeck-us.net> <1456500886.2194.6.camel@localhost>
 <56D07394.8030107@roeck-us.net>
Message-ID: <1456505435.28671.3.camel@localhost>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Fri, 2016-02-26 at 07:47 -0800, Guenter Roeck wrote:
> On 02/26/2016 07:34 AM, Sylvain Lemieux wrote:
> > On Fri, 2016-02-26 at 06:36 -0800, Guenter Roeck wrote:
> >> On 02/25/2016 10:31 AM, Sylvain Lemieux wrote:
> >>> From: Sylvain Lemieux <slemieux@tycoint.com>
> >>>
> >>> The LPC32xx provide the capability to perform a soft or hard reset;
> >>> a soft reset will no reset the external peripheral
> >>> (i.e. RESOUT_N output not asserted).
> >>>
> >>> This changeset migrate the restart code from the "mach-lpc32xx" to
> >>> the "pnx-4008" watchdog driver and add the soft reset capability.
> >>>
> >>> The default behavior (i.e. hard reset) remain unchanged.
> >>>
> >>> The core restart handler support added by this change:
> >>> 2165bf524da5f5e496d - "watchdog: core: add restart handler support"
> >>> is not use in this changeset; it does not support the reboot mode.
> >>
> >> I finally had the time to look into this. Sorry for the late reply.
> >>
> >> Changing the watchdog core to pass the restart mode (or action)
> >> and the cmd/data pointer to the driver would be trivial and should
> >> be done instead.
> >>
> > Thanks for the feedback.
> >
> > Do you want me to rebase this patchset on the patch you will submit
> > to update the core restart handler support?
> >
> 
> Yes, please. I'll Cc: you on it.
> 
> If you want to get started early and are open to do some early testing,
> try cloning git://kerneltests.org/git/linux.git. You'll find the patch
> in branch 'testing'.
> 
Rebase and tested on a custom LPC32xx board.

> Thanks,
> Guenter
>