From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [linux-sunxi][PATCH 3/5] ARM: dts: sunxi: Add the SPDIF to the A10 and A20
Date: Sat, 27 Feb 2016 17:18:27 +0100 [thread overview]
Message-ID: <1456589909-2428-4-git-send-email-codekipper@gmail.com> (raw)
In-Reply-To: <1456589909-2428-1-git-send-email-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
Add the SPDIF transceiver controller and clock to the A10 and
A20 dtsi.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 23 +++++++++++++++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 23 +++++++++++++++++++++++
2 files changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 0483640..83d46b2 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -477,6 +477,17 @@
clock-output-names = "ir1";
};
+ spdif_clk: clk at 01c200c0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod1-clk";
+ reg = <0x01c200c0 0x4>;
+ clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+ <&pll2 SUN4I_A10_PLL2_4X>,
+ <&pll2 SUN4I_A10_PLL2_2X>,
+ <&pll2 SUN4I_A10_PLL2_1X>;
+ clock-output-names = "spdif";
+ };
+
usb_clk: clk at 01c200cc {
#clock-cells = <1>;
#reset-cells = <1>;
@@ -1055,6 +1066,18 @@
status = "disabled";
};
+ spdif: spdif at 01c21000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun4i-a10-spdif";
+ reg = <0x01c21000 0x40>;
+ interrupts = <13>;
+ clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clock-names = "apb", "spdif";
+ dmas = <&dma 0 2>, <&dma 0 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
ir0: ir at 01c21800 {
compatible = "allwinner,sun4i-a10-ir";
clocks = <&apb0_gates 6>, <&ir0_clk>;
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 7264d5e..4631660 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -476,6 +476,17 @@
clock-output-names = "ir1";
};
+ spdif_clk: clk at 01c200c0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod1-clk";
+ reg = <0x01c200c0 0x4>;
+ clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+ <&pll2 SUN4I_A10_PLL2_4X>,
+ <&pll2 SUN4I_A10_PLL2_2X>,
+ <&pll2 SUN4I_A10_PLL2_1X>;
+ clock-output-names = "spdif";
+ };
+
keypad_clk: clk at 01c200c4 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
@@ -1247,6 +1258,18 @@
status = "disabled";
};
+ spdif: spdif at 01c21000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun4i-a10-spdif";
+ reg = <0x01c21000 0x40>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clock-names = "apb", "spdif";
+ dmas = <&dma 0 2>, <&dma 0 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
ir0: ir at 01c21800 {
compatible = "allwinner,sun4i-a10-ir";
clocks = <&apb0_gates 6>, <&ir0_clk>;
--
2.7.1
next prev parent reply other threads:[~2016-02-27 16:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-27 16:18 [linux-sunxi][PATCH 0/5] ARM: sunxi: Add SPDIF playback support codekipper at gmail.com
2016-02-27 16:18 ` [linux-sunxi][PATCH 1/5] clk: sunxi: mod1 clock should modify it's parent codekipper at gmail.com
2016-02-27 16:18 ` [linux-sunxi][PATCH 2/5] ARM: dts :sunxi: Add SPDIF pins to A10 and A20 codekipper at gmail.com
2016-02-27 16:18 ` codekipper at gmail.com [this message]
2016-03-13 21:50 ` [linux-sunxi][PATCH 3/5] ARM: dts: sunxi: Add the SPDIF to the " Maxime Ripard
2016-03-14 16:29 ` Code Kipper
2016-03-14 18:52 ` Maxime Ripard
2016-02-27 16:18 ` [linux-sunxi][PATCH 4/5] ARM: dts: sun4i: Add SPDIF to the Mele A1000 codekipper at gmail.com
2016-02-27 16:18 ` [linux-sunxi][PATCH 5/5] ARM: dts: sun7i: Add SPDIF to Itead Ibox codekipper at gmail.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456589909-2428-4-git-send-email-codekipper@gmail.com \
--to=codekipper@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).