From: alexandre.torgue@gmail.com (Alexandre TORGUE)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: dts: stm32f429: Add Ethernet support
Date: Mon, 29 Feb 2016 17:29:35 +0100 [thread overview]
Message-ID: <1456763376-21457-3-git-send-email-alexandre.torgue@gmail.com> (raw)
In-Reply-To: <1456763376-21457-1-git-send-email-alexandre.torgue@gmail.com>
Add Ethernet support (Synopsys MAC IP 3.50a) on stm32f429 SOC.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com>
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index bb7a736..af0367c 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -283,6 +283,26 @@
bias-disable;
};
};
+
+ ethernet0_mii: mii at 0 {
+ mii {
+ slew-rate = <2>;
+ pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
+ <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
+ <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
+ <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
+ <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
+ <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
+ <STM32F429_PA2_FUNC_ETH_MDIO>,
+ <STM32F429_PC1_FUNC_ETH_MDC>,
+ <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
+ <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
+ <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
+ <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
+ <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
+ <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
+ };
+ };
};
rcc: rcc at 40023810 {
@@ -323,6 +343,21 @@
st,mem2mem;
};
+ ethernet0: dwmac at 40028000 {
+ compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+ status = "disabled";
+ reg = <0x40028000 0x8000>;
+ reg-names = "stmmaceth";
+ interrupts = <0 61 0>, <0 62 0>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clock-names = "stmmaceth", "tx-clk", "rx-clk";
+ clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+ st,syscon = <&syscfg 0x4>;
+ snps,pbl = <8>;
+ snps,mixed-burst;
+ dma-ranges;
+ };
+
rng: rng at 50060800 {
compatible = "st,stm32-rng";
reg = <0x50060800 0x400>;
--
1.9.1
next prev parent reply other threads:[~2016-02-29 16:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-29 16:29 [PATCH 0/3] Enable Ethernet on STM32F429 EVAL board Alexandre TORGUE
2016-02-29 16:29 ` [PATCH 1/3] ARM: dts: stm32f429: Add system config bank node Alexandre TORGUE
2016-02-29 16:29 ` Alexandre TORGUE [this message]
2016-03-01 17:24 ` [PATCH 2/3] ARM: dts: stm32f429: Add Ethernet support Maxime Coquelin
2016-03-02 8:23 ` Alexandre Torgue
2016-02-29 16:29 ` [PATCH 3/3] ARM: dts: stm32f429: Enable Ethernet on Eval board Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456763376-21457-3-git-send-email-alexandre.torgue@gmail.com \
--to=alexandre.torgue@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).