From mboxrd@z Thu Jan 1 00:00:00 1970 From: wsa@the-dreams.de (Wolfram Sang) Date: Wed, 2 Mar 2016 23:33:35 +0100 Subject: [PATCH 4/6] pwm: pwm-lpc18xx-sct: test clock rate to avoid division by 0 In-Reply-To: <1456958018-7849-1-git-send-email-wsa@the-dreams.de> References: <1456958018-7849-1-git-send-email-wsa@the-dreams.de> Message-ID: <1456958018-7849-5-git-send-email-wsa@the-dreams.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Wolfram Sang The clk API may return 0 on clk_get_rate, so we should check the result before using it as a divisor. Signed-off-by: Wolfram Sang --- Should go individually via subsystem tree. drivers/pwm/pwm-lpc18xx-sct.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pwm/pwm-lpc18xx-sct.c b/drivers/pwm/pwm-lpc18xx-sct.c index 9163085101bc94..6487962c355c03 100644 --- a/drivers/pwm/pwm-lpc18xx-sct.c +++ b/drivers/pwm/pwm-lpc18xx-sct.c @@ -360,6 +360,8 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev) } lpc18xx_pwm->clk_rate = clk_get_rate(lpc18xx_pwm->pwm_clk); + if (!lpc18xx_pwm->clk_rate) + return -EINVAL; mutex_init(&lpc18xx_pwm->res_lock); mutex_init(&lpc18xx_pwm->period_lock); -- 2.7.0