From: tthayer@opensource.altera.com (tthayer at opensource.altera.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 06/11] EDAC, altera: Add IRQ flags to private data struct
Date: Mon, 7 Mar 2016 13:43:02 -0600 [thread overview]
Message-ID: <1457379787-8327-7-git-send-email-tthayer@opensource.altera.com> (raw)
In-Reply-To: <1457379787-8327-1-git-send-email-tthayer@opensource.altera.com>
From: Thor Thayer <tthayer@opensource.altera.com>
In preparation for the Arria10 peripheral ECCs, irq_flags
was added to the private data structure because Arria10
uses shared IRQs while Cyclone5/Arria5 have exclusive IRQs.
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
v2: Split large patch into smaller patches. Add irq_flags
to the private data structure.
---
drivers/edac/altera_edac.c | 8 ++++++--
drivers/edac/altera_edac.h | 1 +
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index c28cd78..fd73a77 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -759,14 +759,16 @@ static int altr_edac_device_probe(struct platform_device *pdev)
drvdata->sb_irq = platform_get_irq(pdev, 0);
res = devm_request_irq(&pdev->dev, drvdata->sb_irq,
altr_edac_device_handler,
- 0, dev_name(&pdev->dev), dci);
+ drvdata->data->irq_flags,
+ dev_name(&pdev->dev), dci);
if (res)
goto fail1;
drvdata->db_irq = platform_get_irq(pdev, 1);
res = devm_request_irq(&pdev->dev, drvdata->db_irq,
altr_edac_device_handler,
- 0, dev_name(&pdev->dev), dci);
+ drvdata->data->irq_flags,
+ dev_name(&pdev->dev), dci);
if (res)
goto fail1;
@@ -889,6 +891,7 @@ const struct edac_device_prv_data ocramecc_data = {
.ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
.set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
.trig_alloc_sz = ALTR_TRIG_OCRAM_BYTE_SIZE,
+ .irq_flags = 0,
};
#endif /* CONFIG_EDAC_ALTERA_OCRAM */
@@ -964,6 +967,7 @@ const struct edac_device_prv_data l2ecc_data = {
.ue_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJD),
.set_err_ofst = ALTR_L2_ECC_REG_OFFSET,
.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+ .irq_flags = 0,
};
#endif /* CONFIG_EDAC_ALTERA_L2C */
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index f15b4ad..b262f74 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -235,6 +235,7 @@ struct edac_device_prv_data {
int ue_set_mask;
int set_err_ofst;
int trig_alloc_sz;
+ int irq_flags;
};
struct altr_edac_device_dev {
--
1.7.9.5
next prev parent reply other threads:[~2016-03-07 19:43 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-07 19:42 [PATCHv2 0/11] Series adding Altera Arria10 L2 Cache EDAC tthayer at opensource.altera.com
2016-03-07 19:42 ` [PATCHv2 01/11] EDAC: Altera L2 Kconfig change from select to depends upon tthayer at opensource.altera.com
2016-03-07 19:42 ` [PATCHv2 02/11] EDAC, altera: Move Device structs and defines to header file tthayer at opensource.altera.com
2016-03-07 19:42 ` [PATCHv2 03/11] EDAC, altera: Add register offset for ECC Enable tthayer at opensource.altera.com
2016-03-07 19:43 ` [PATCHv2 04/11] EDAC, altera: Add register offset for ECC Error Inject tthayer at opensource.altera.com
2016-03-07 19:43 ` [PATCHv2 05/11] EDAC, altera: Add register offset for ECC Error Clear tthayer at opensource.altera.com
2016-03-07 19:43 ` tthayer at opensource.altera.com [this message]
2016-03-07 19:43 ` [PATCHv2 07/11] EDAC, altera: Add status offset & masks tthayer at opensource.altera.com
2016-03-08 15:52 ` Thor Thayer
2016-03-07 19:43 ` [PATCHv2 08/11] Documentation: dt: socfpga: Add Altera Arria10 L2 cache binding tthayer at opensource.altera.com
2016-03-07 19:43 ` [PATCHv2 09/11] EDAC, altera: Addition of Arria10 L2 Cache ECC tthayer at opensource.altera.com
2016-03-07 19:43 ` [PATCHv2 10/11] ARM: socfpga: Enable Arria10 L2 cache ECC on startup tthayer at opensource.altera.com
2016-03-08 14:45 ` Dinh Nguyen
2016-03-07 19:43 ` [PATCHv2 11/11] ARM: dts: Add Altera Arria10 L2 Cache EDAC devicetree entry tthayer at opensource.altera.com
2016-03-08 14:50 ` Dinh Nguyen
2016-03-08 15:59 ` Thor Thayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457379787-8327-7-git-send-email-tthayer@opensource.altera.com \
--to=tthayer@opensource.altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).