From mboxrd@z Thu Jan 1 00:00:00 1970 From: fcooper@ti.com (Franklin S Cooper Jr) Date: Mon, 7 Mar 2016 13:51:58 -0600 Subject: [PATCH 5/5] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name In-Reply-To: <1457380318-15452-1-git-send-email-fcooper@ti.com> References: <1457380318-15452-1-git-send-email-fcooper@ti.com> Message-ID: <1457380318-15452-6-git-send-email-fcooper@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Now that the node name has been changed from ehrpwm to pwm the document should show this proper usage. Also change the unit address in the example from 0 to the proper physical address value that should be used. Signed-off-by: Franklin S Cooper Jr --- Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt index 9c100b2..20211ed 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt @@ -15,14 +15,14 @@ Optional properties: Example: -ehrpwm0: ehrpwm at 0 { /* EHRPWM on am33xx */ +ehrpwm0: pwm at 48300200 { /* EHRPWM on am33xx */ compatible = "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48300200 0x100>; ti,hwmods = "ehrpwm0"; }; -ehrpwm0: ehrpwm at 0 { /* EHRPWM on da850 */ +ehrpwm0: pwm at 01f00000 { /* EHRPWM on da850 */ compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x300000 0x2000>; -- 2.7.0