From mboxrd@z Thu Jan 1 00:00:00 1970 From: narmstrong@baylibre.com (Neil Armstrong) Date: Wed, 9 Mar 2016 11:24:04 +0100 Subject: [PATCH v2 02/18] dt-bindings: timer: sp804: add timer-width property In-Reply-To: <1457519060-6038-1-git-send-email-narmstrong@baylibre.com> References: <1457005210-18485-1-git-send-email-narmstrong@baylibre.com> <1457519060-6038-1-git-send-email-narmstrong@baylibre.com> Message-ID: <1457519060-6038-3-git-send-email-narmstrong@baylibre.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add timer-width optional property to specify a different vendor specific timer counter bit-width. Signed-off-by: Neil Armstrong --- Documentation/devicetree/bindings/timer/arm,sp804.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.txt b/Documentation/devicetree/bindings/timer/arm,sp804.txt index 5cd8eee7..141e143 100644 --- a/Documentation/devicetree/bindings/timer/arm,sp804.txt +++ b/Documentation/devicetree/bindings/timer/arm,sp804.txt @@ -17,6 +17,8 @@ Optional properties: - arm,sp804-has-irq = <#>: In the case of only 1 timer irq line connected, this specifies if the irq connection is for timer 1 or timer 2. A value of 1 or 2 should be used. +- arm,timer-width: Should contain the width in number of bits of the counter, + is considered by default 32 but can be changed for vendor variants. Example: -- 1.9.1