From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Wed, 9 Mar 2016 11:50:14 +0100 Subject: [PATCH 4/4] ARM: sun5i: chip: Add status LED In-Reply-To: <1457520614-32239-1-git-send-email-maxime.ripard@free-electrons.com> References: <1457520614-32239-1-git-send-email-maxime.ripard@free-electrons.com> Message-ID: <1457520614-32239-5-git-send-email-maxime.ripard@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The CHIP has a status LED connected to one of the AXP GPIOs. Add the gpio-leds node to be able to use the proper LED framework to control it. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-r8-chip.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index f6898c6b84d4..9a54df81ece7 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -64,6 +64,16 @@ chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + + status { + label = "chip:white:status"; + gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; }; &codec { -- 2.7.2