From mboxrd@z Thu Jan 1 00:00:00 1970 From: chf.fritz@googlemail.com (Christoph Fritz) Date: Wed, 09 Mar 2016 16:39:57 +0100 Subject: [PATCH v3 0/2] Add PCIe driver support for imx6sx In-Reply-To: <1457338819.1904.4.camel@googlemail.com> References: <1456411669-4699-1-git-send-email-chf.fritz@googlemail.com> <1457338819.1904.4.camel@googlemail.com> Message-ID: <1457537997.17531.3.camel@googlemail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, 2016-03-07 at 09:20 +0100, Christoph Fritz wrote: > On Thu, 2016-03-03 at 01:48 +0000, Richard Zhu wrote: > > > -----Original Message----- > > > From: Christoph Fritz [mailto:chf.fritz at googlemail.com] > > > Sent: Thursday, February 25, 2016 10:48 PM > > > To: Richard Zhu; Lucas Stach; Shawn Guo; Fabio Estevam; Bjorn Helgaas; Lee > > > Jones > > > Cc: linux-pci at vger.kernel.org; linux-arm-kernel at lists.infradead.org > > > Subject: [PATCH v3 0/2] Add PCIe driver support for imx6sx > > > > > > v3: > > > * adapt devicetree bindings documentation fsl,imx6q-pcie.txt > > > v2: > > > * leave out regulator handling from driver, will be done later > > > in PM subsystem > > > * use BIT() macro for MFD > > > > > > Christoph Fritz (2): > > > MFD: imx6sx: Add PCIe register definitions for iomuxc gpr > > > PCI: imx6: add initial imx6sx support > > > > > > .../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 6 +- > > > drivers/pci/host/pci-imx6.c | 130 ++++++++++++++------- > > > include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 5 + > > > 3 files changed, 101 insertions(+), 40 deletions(-) > > > > > > -- > > > 2.1.4 > > > > [Zhu hongxing] Acked-by: Richard Zhu > > Richard > > Best Regards > > @Bjorn: I suppose the PCI patch need to go through your tree. Would you > pick up this patch? *ping* Do you want me to rebase my patch to your pci/host-imx6 branch? Thanks -- Christoph