From: ddaney.cavm@gmail.com (David Daney)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/3] phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.
Date: Fri, 11 Mar 2016 09:53:11 -0800 [thread overview]
Message-ID: <1457718791-6505-4-git-send-email-ddaney.cavm@gmail.com> (raw)
In-Reply-To: <1457718791-6505-1-git-send-email-ddaney.cavm@gmail.com>
From: David Daney <david.daney@cavium.com>
The Cavium Thunder SoCs have multiple MIDO buses that are part of a
single PCI device. To model this in the device tree we call the PCI
parent device a "cavium,thunder-8890-mdio-nexus", it has several
children, one for each MDIO bus.
The MDIO bus hardware is identical to that found in the OCTEON SoCs,
so we use that code for things that are not part of the PCI driver
probe/remove
Signed-off-by: David Daney <david.daney@cavium.com>
---
.../devicetree/bindings/net/cavium-mdio.txt | 61 +++++++-
drivers/net/phy/Kconfig | 11 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-thunder.c | 154 +++++++++++++++++++++
4 files changed, 225 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/phy/mdio-thunder.c
diff --git a/Documentation/devicetree/bindings/net/cavium-mdio.txt b/Documentation/devicetree/bindings/net/cavium-mdio.txt
index 04cb749..020df08 100644
--- a/Documentation/devicetree/bindings/net/cavium-mdio.txt
+++ b/Documentation/devicetree/bindings/net/cavium-mdio.txt
@@ -1,9 +1,12 @@
* System Management Interface (SMI) / MDIO
Properties:
-- compatible: "cavium,octeon-3860-mdio"
+- compatible: One of:
- Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+ "cavium,octeon-3860-mdio": Compatibility with all cn3XXX, cn5XXX
+ and cn6XXX SOCs.
+
+ "cavium,thunder-8890-mdio": Compatibility with all cn8XXX SOCs.
- reg: The base address of the MDIO bus controller register bank.
@@ -25,3 +28,57 @@ Example:
reg = <0>;
};
};
+
+
+* System Management Interface (SMI) / MDIO Nexus
+
+ Several mdio buses may be gathered as children of a single PCI
+ device, this PCI device is the nexus of the buses.
+
+Properties:
+
+- compatible: "cavium,thunder-8890-mdio-nexus";
+
+- reg: The PCI device and function numbers of the nexus device.
+
+- #address-cells: Must be <2>.
+
+- #size-cells: Must be <2>.
+
+- ranges: As needed for mapping of the MDIO bus device registers.
+
+- assigned-addresses: As needed for mapping of the MDIO bus device registers.
+
+Example:
+
+ mdio-nexus at 1,3 {
+ compatible = "cavium,thunder-8890-mdio-nexus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0b00 0 0 0 0>; /* DEVFN = 0x0b (1:3) */
+ assigned-addresses = <0x03000000 0x87e0 0x05000000 0x0 0x800000>;
+ ranges = <0x87e0 0x05000000 0x03000000 0x87e0 0x05000000 0x0 0x800000>;
+
+ mdio0 at 87e0,05003800 {
+ compatible = "cavium,thunder-8890-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x87e0 0x05003800 0x0 0x30>;
+
+ ethernet-phy at 0 {
+ ...
+ reg = <0>;
+ };
+ };
+ mdio0 at 87e0,05003880 {
+ compatible = "cavium,thunder-8890-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x87e0 0x05003880 0x0 0x30>;
+
+ ethernet-phy at 0 {
+ ...
+ reg = <0>;
+ };
+ };
+ };
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 40faec9..075a4cc 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -196,6 +196,17 @@ config MDIO_OCTEON
buses. It is required by the Octeon and ThunderX ethernet device
drivers on some systems.
+config MDIO_THUNDER
+ tristate "Support for MDIO buses on on ThunderX SOCs"
+ depends on 64BIT
+ depends on PCI
+ select MDIO_CAVIUM
+ help
+ This driver supports the MDIO interfaces found on Cavium
+ ThunderX SoCs when the MDIO bus device appears on as a PCI
+ device.
+
+
config MDIO_SUN4I
tristate "Allwinner sun4i MDIO interface support"
depends on ARCH_SUNXI
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 041b3d9..fcdbb92 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_DP83867_PHY) += dp83867.o
obj-$(CONFIG_STE10XP) += ste10Xp.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
+obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
obj-$(CONFIG_AT803X_PHY) += at803x.o
diff --git a/drivers/net/phy/mdio-thunder.c b/drivers/net/phy/mdio-thunder.c
new file mode 100644
index 0000000..5646169
--- /dev/null
+++ b/drivers/net/phy/mdio-thunder.c
@@ -0,0 +1,154 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009-2016 Cavium, Inc.
+ */
+
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <linux/phy.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+#include <linux/pci.h>
+
+#include "mdio-cavium.h"
+
+struct thunder_mdiobus_nexus {
+ void __iomem *bar0;
+ struct cavium_mdiobus *buses[4];
+};
+
+static int thunder_mdiobus_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct device_node *node;
+ struct fwnode_handle *fwn;
+ struct thunder_mdiobus_nexus *nexus;
+ int err;
+ int i;
+
+ nexus = devm_kzalloc(&pdev->dev, sizeof(*nexus), GFP_KERNEL);
+ if (!nexus)
+ return -ENOMEM;
+
+ pci_set_drvdata(pdev, nexus);
+
+ err = pcim_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to enable PCI device\n");
+ pci_set_drvdata(pdev, NULL);
+ return err;
+ }
+
+ err = pci_request_regions(pdev, KBUILD_MODNAME);
+ if (err) {
+ dev_err(&pdev->dev, "pci_request_regions failed\n");
+ goto err_disable_device;
+ }
+
+ nexus->bar0 = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
+ if (!nexus->bar0) {
+ err = -ENOMEM;
+ goto err_release_regions;
+ }
+
+ i = 0;
+ device_for_each_child_node(&pdev->dev, fwn) {
+ struct resource r;
+ struct mii_bus *mii_bus;
+ struct cavium_mdiobus *bus;
+ union cvmx_smix_en smi_en;
+
+ /* If it is not an OF node we cannot handle it yet, so
+ * exit the loop.
+ */
+ node = to_of_node(fwn);
+ if (!node)
+ break;
+
+ err = of_address_to_resource(node, 0, &r);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Couldn't translate address for \"%s\"\n",
+ node->name);
+ break;
+ }
+
+ mii_bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*bus));
+ if (!mii_bus)
+ break;
+ bus = mii_bus->priv;
+ bus->mii_bus = mii_bus;
+
+ nexus->buses[i] = bus;
+ i++;
+
+ bus->register_base = (u64)nexus->bar0 +
+ r.start - pci_resource_start(pdev, 0);
+
+ smi_en.u64 = 0;
+ smi_en.s.en = 1;
+ oct_mdio_writeq(smi_en.u64, bus->register_base + SMI_EN);
+ bus->mii_bus->name = KBUILD_MODNAME;
+ snprintf(bus->mii_bus->id, MII_BUS_ID_SIZE, "%llx", r.start);
+ bus->mii_bus->parent = &pdev->dev;
+ bus->mii_bus->read = cavium_mdiobus_read;
+ bus->mii_bus->write = cavium_mdiobus_write;
+
+ err = of_mdiobus_register(bus->mii_bus, node);
+ if (err)
+ dev_err(&pdev->dev, "of_mdiobus_register failed\n");
+
+ dev_info(&pdev->dev, "Added bus at %llx\n", r.start);
+ if (i >= ARRAY_SIZE(nexus->buses))
+ break;
+ }
+ return 0;
+
+err_release_regions:
+ pci_release_regions(pdev);
+
+err_disable_device:
+ pci_set_drvdata(pdev, NULL);
+ return err;
+}
+
+static void thunder_mdiobus_pci_remove(struct pci_dev *pdev)
+{
+ int i;
+ struct thunder_mdiobus_nexus *nexus = pci_get_drvdata(pdev);
+
+ for (i = 0; i < ARRAY_SIZE(nexus->buses); i++) {
+ struct cavium_mdiobus *bus = nexus->buses[i];
+
+ if (!bus)
+ continue;
+
+ mdiobus_unregister(bus->mii_bus);
+ mdiobus_free(bus->mii_bus);
+ oct_mdio_writeq(0, bus->register_base + SMI_EN);
+ }
+ pci_set_drvdata(pdev, NULL);
+}
+
+static const struct pci_device_id thunder_mdiobus_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xa02b) },
+ { 0, } /* End of table. */
+};
+MODULE_DEVICE_TABLE(pci, thunder_mdiobus_id_table);
+
+static struct pci_driver thunder_mdiobus_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = thunder_mdiobus_id_table,
+ .probe = thunder_mdiobus_pci_probe,
+ .remove = thunder_mdiobus_pci_remove,
+};
+
+module_pci_driver(thunder_mdiobus_driver);
+
+MODULE_DESCRIPTION("Cavium ThunderX MDIO bus driver");
+MODULE_LICENSE("GPL");
--
1.7.11.7
next prev parent reply other threads:[~2016-03-11 17:53 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-11 17:53 [PATCH v2 0/3] net/phy: Improvements to Cavium Thunder MDIO code David Daney
2016-03-11 17:53 ` [PATCH v2 1/3] net: thunderx: Cleanup PHY probing code David Daney
2016-03-11 17:53 ` [PATCH v2 2/3] phy: mdio-octeon: Refactor into two files/modules David Daney
2016-03-11 17:53 ` David Daney [this message]
2016-03-16 22:50 ` [PATCH v2 3/3] phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses Andreas Färber
2016-03-16 22:54 ` David Daney
2016-03-16 23:24 ` Andreas Färber
2016-03-12 0:08 ` [PATCH v2 0/3] net/phy: Improvements to Cavium Thunder MDIO code David Daney
2016-03-14 19:27 ` David Miller
2016-03-14 20:12 ` David Daney
2016-03-14 20:18 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457718791-6505-4-git-send-email-ddaney.cavm@gmail.com \
--to=ddaney.cavm@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).