From mboxrd@z Thu Jan 1 00:00:00 1970 From: wxt@rock-chips.com (Caesar Wang) Date: Mon, 14 Mar 2016 16:02:00 +0800 Subject: [PATCH v3 9/9] ARM: dts: rockchip: add to support emac for rk3036 SoCs In-Reply-To: <1457942520-12859-1-git-send-email-wxt@rock-chips.com> References: <1457942520-12859-1-git-send-email-wxt@rock-chips.com> Message-ID: <1457942520-12859-10-git-send-email-wxt@rock-chips.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Xing Zheng This patch adds the emac device node for rk3036 SoCs. We need to let mac clock under the DPLL which is able to provide the accurate 50MHz what mac_ref need, since that will cause some unstable things if the cpufreq is working. Signed-off-by: Xing Zheng Signed-off-by: Caesar Wang Cc: linux-rockchip at lists.infradead.org Cc: Xing Zheng Cc: Heiko Stuebner Cc: linux-arm-kernel at lists.infradead.org --- Changes in v3: - rename reset-gpio to phy-reset-gpios. - change the commit. - remove the pcfg_output_high, that's really not needed for emac. - Add the Cc people. - Fixes the 'zhengxing' to 'Xing Zheng'. Changes in v2: - rename phy-reset-gpio to reset-gpios. arch/arm/boot/dts/rk3036-evb.dts | 14 ++++++++++++++ arch/arm/boot/dts/rk3036-kylin.dts | 14 ++++++++++++++ arch/arm/boot/dts/rk3036.dtsi | 39 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 67 insertions(+) diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 28a0336..b3d6ec8 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -47,6 +47,20 @@ compatible = "rockchip,rk3036-evb", "rockchip,rk3036"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; + phy = <&phy0>; + phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-duration = <10>; /* millisecond */ + + status = "okay"; + + phy0: ethernet-phy at 0 { + reg = <0>; + }; +}; + &i2c1 { status = "okay"; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index eb9c979..951f15d 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -112,6 +112,20 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; + phy = <&phy0>; + phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-duration = <10>; /* millisecond */ + + status = "okay"; + + phy0: ethernet-phy at 0 { + reg = <0>; + }; +}; + &emmc { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 90faa86..5175a2a 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -223,6 +223,27 @@ status = "disabled"; }; + emac: ethernet at 10200000 { + compatible = "rockchip,rk3036-emac", "snps,arc-emac"; + reg = <0x10200000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + rockchip,grf = <&grf>; + clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>; + clock-names = "hclk", "macref", "macclk"; + /* + * Fix the emac parent clock is DPLL instead of APLL. + * since that will cause some unstable things if the cpufreq + * is working. (e.g: the accurate 50MHz what mac_ref need) + */ + assigned-clocks = <&cru SCLK_MACPLL>; + assigned-clock-parents = <&cru PLL_DPLL>; + max-speed = <100>; + phy-mode = "rmii"; + status = "disabled"; + }; + sdmmc: dwmmc at 10214000 { compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10214000 0x4000>; @@ -628,6 +649,24 @@ }; }; + emac { + emac_xfer: emac-xfer { + rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */ + <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */ + <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */ + <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */ + <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */ + <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */ + <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */ + <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */ + }; + + emac_mdio: emac-mdio { + rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */ + <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */ + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, -- 1.9.1