From: gary.bisson@boundarydevices.com (Gary Bisson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/9] imx: add latest Boundary Devices boards support
Date: Tue, 15 Mar 2016 15:04:19 +0100 [thread overview]
Message-ID: <1458050668-26748-1-git-send-email-gary.bisson@boundarydevices.com> (raw)
In-Reply-To: <1458037826-19375-1-git-send-email-gary.bisson@boundarydevices.com>
Hi all,
This series adds support for the following Boundary Devices boards:
- Nitrogen7 (i.MX7)
- Nitrogen6SX (i.MX6SoloX)
- Nitrogen6QP_MAX (i.MX6QP)
The first patches add display and CAN support to i.MX7 device tree. Those
two features have been successfully tested on the Nitrogen7. Also the support
of CKIL clock has been added in order to use it as slow clock for the WiFi
module.
Then the last 3 patches add some missing configurations in order to fully
support Boundary platforms using imx_v6_v7_defconfig.
All the patches have been applied/tested on top of Shawn's 'for-next' branch.
Here are some remarks/questions that came during testing:
- Is the pxp v4l2 driver being worked on for mainline inclusion?
- Are the ldb modifications for SoloX being worked on for mainline inclusion?
- Is the WM8960 ASoC machine driver being worked on for mainline inclusion?
- When booting the Nitrogen7, there's backtrace due to clk_pllv3_prepare, does
it happen on the sdb too? Note that it doesn't prevent the board to work.
Changelog v1 -> v2:
- Remove lines commented out from nitrogen6sx dts as suggested by Vladimir
- Disable pcie for nitrogen6qp_max dts
Regards,
Gary
Gary Bisson (9):
ARM: dts: imx7d: add lcdif support
ARM: dts: imx7d: add flexcan support
clk: imx: add ckil clock for i.MX7
ARM: dts: imx: add Boundary Devices Nitrogen7 board
ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board
ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/imx6qp-nitrogen6_max.dts | 59 +++
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 732 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d-nitrogen7.dts | 818 +++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d.dtsi | 33 ++
arch/arm/configs/imx_v6_v7_defconfig | 4 +
drivers/clk/imx/clk-imx7d.c | 3 +-
include/dt-bindings/clock/imx7d-clock.h | 3 +-
8 files changed, 1653 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
create mode 100644 arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
create mode 100644 arch/arm/boot/dts/imx7d-nitrogen7.dts
--
2.7.0
next prev parent reply other threads:[~2016-03-15 14:04 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-15 10:30 [PATCH 0/9] imx: add latest Boundary Devices boards support Gary Bisson
2016-03-15 10:30 ` [PATCH 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
2016-03-15 10:30 ` [PATCH 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
2016-03-15 10:30 ` [PATCH 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
2016-03-15 10:30 ` [PATCH 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
2016-03-15 10:30 ` [PATCH 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
2016-03-15 10:30 ` [PATCH 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
2016-03-15 10:53 ` Vladimir Zapolskiy
2016-03-15 10:58 ` Gary Bisson
2016-03-15 10:30 ` [PATCH 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
2016-03-15 10:30 ` [PATCH 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
2016-03-15 10:30 ` [PATCH 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
2016-03-15 14:04 ` Gary Bisson [this message]
2016-03-15 14:04 ` [PATCH v2 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
2016-04-02 1:29 ` Shawn Guo
2016-04-02 16:08 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
2016-04-02 1:31 ` Shawn Guo
2016-04-02 16:10 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
2016-03-15 14:04 ` [PATCH v2 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
2016-03-15 14:04 ` [PATCH v2 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
2016-03-15 14:04 ` [PATCH v2 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
2016-03-15 14:04 ` [PATCH v2 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
2016-03-15 14:04 ` [PATCH v2 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
2016-03-15 14:04 ` [PATCH v2 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
2016-04-02 16:25 ` [PATCH v3 0/9] imx: add latest Boundary Devices boards support Gary Bisson
2016-04-02 16:25 ` [PATCH v3 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
2016-04-06 9:06 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
2016-04-02 16:25 ` [PATCH v3 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
2016-04-02 16:25 ` [PATCH v3 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
2016-04-06 14:15 ` Shawn Guo
2016-04-07 10:07 ` Gary Bisson
2016-04-07 13:50 ` [PATCH v4] " Gary Bisson
2016-04-11 14:13 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
2016-04-06 14:25 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
2016-04-07 13:52 ` [PATCH v4] " Gary Bisson
2016-04-11 14:31 ` Shawn Guo
2016-04-11 21:01 ` [PATCH v5] " Gary Bisson
2016-04-12 0:47 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
2016-04-06 14:35 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
2016-04-02 16:25 ` [PATCH v3 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458050668-26748-1-git-send-email-gary.bisson@boundarydevices.com \
--to=gary.bisson@boundarydevices.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).