From: gary.bisson@boundarydevices.com (Gary Bisson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/9] ARM: dts: imx7d: add lcdif support
Date: Tue, 15 Mar 2016 15:04:20 +0100 [thread overview]
Message-ID: <1458050668-26748-2-git-send-email-gary.bisson@boundarydevices.com> (raw)
In-Reply-To: <1458050668-26748-1-git-send-email-gary.bisson@boundarydevices.com>
Add the device node for the i.MX7 eLCDIF interface.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
Changelog v1 -> v2:
- none
---
arch/arm/boot/dts/imx7d.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b5a50e0..a768716 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -608,6 +608,17 @@
status = "disabled";
};
+ lcdif: lcdif at 30730000 {
+ compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+ reg = <0x30730000 0x10000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "pix", "axi", "disp_axi";
+ status = "disabled";
+ };
+
pwm1: pwm at 30660000 {
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
reg = <0x30660000 0x10000>;
--
2.7.0
next prev parent reply other threads:[~2016-03-15 14:04 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-15 10:30 [PATCH 0/9] imx: add latest Boundary Devices boards support Gary Bisson
2016-03-15 10:30 ` [PATCH 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
2016-03-15 10:30 ` [PATCH 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
2016-03-15 10:30 ` [PATCH 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
2016-03-15 10:30 ` [PATCH 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
2016-03-15 10:30 ` [PATCH 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
2016-03-15 10:30 ` [PATCH 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
2016-03-15 10:53 ` Vladimir Zapolskiy
2016-03-15 10:58 ` Gary Bisson
2016-03-15 10:30 ` [PATCH 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
2016-03-15 10:30 ` [PATCH 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
2016-03-15 10:30 ` [PATCH 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
2016-03-15 14:04 ` [PATCH v2 0/9] imx: add latest Boundary Devices boards support Gary Bisson
2016-03-15 14:04 ` Gary Bisson [this message]
2016-04-02 1:29 ` [PATCH v2 1/9] ARM: dts: imx7d: add lcdif support Shawn Guo
2016-04-02 16:08 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
2016-04-02 1:31 ` Shawn Guo
2016-04-02 16:10 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
2016-03-15 14:04 ` [PATCH v2 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
2016-03-15 14:04 ` [PATCH v2 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
2016-03-15 14:04 ` [PATCH v2 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
2016-03-15 14:04 ` [PATCH v2 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
2016-03-15 14:04 ` [PATCH v2 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
2016-03-15 14:04 ` [PATCH v2 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
2016-04-02 16:25 ` [PATCH v3 0/9] imx: add latest Boundary Devices boards support Gary Bisson
2016-04-02 16:25 ` [PATCH v3 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
2016-04-06 9:06 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
2016-04-02 16:25 ` [PATCH v3 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
2016-04-02 16:25 ` [PATCH v3 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
2016-04-06 14:15 ` Shawn Guo
2016-04-07 10:07 ` Gary Bisson
2016-04-07 13:50 ` [PATCH v4] " Gary Bisson
2016-04-11 14:13 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
2016-04-06 14:25 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
2016-04-07 13:52 ` [PATCH v4] " Gary Bisson
2016-04-11 14:31 ` Shawn Guo
2016-04-11 21:01 ` [PATCH v5] " Gary Bisson
2016-04-12 0:47 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
2016-04-06 14:35 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
2016-04-02 16:25 ` [PATCH v3 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458050668-26748-2-git-send-email-gary.bisson@boundarydevices.com \
--to=gary.bisson@boundarydevices.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).