From mboxrd@z Thu Jan 1 00:00:00 1970 From: appana.durga.rao@xilinx.com (Kedareswara rao Appana) Date: Tue, 15 Mar 2016 22:53:09 +0530 Subject: [PATCH 4/7] dmaengine: xilinx_vdma: Add Support for Xilinx AXI Direct Memory Access Engine In-Reply-To: <1458062592-27981-1-git-send-email-appanad@xilinx.com> References: <1458062592-27981-1-git-send-email-appanad@xilinx.com> Message-ID: <1458062592-27981-5-git-send-email-appanad@xilinx.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch updates the device-tree binding doc for adding support for AXI DMA. Signed-off-by: Kedareswara rao Appana --- .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt index e4c4d47..3d134a5 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt @@ -3,8 +3,13 @@ It can be configured to have one channel or two channels. If configured as two channels, one is to transmit to the video device and another is to receive from the video device. +Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream +target devices. It can be configured to have one channel or two channels. +If configured as two channels, one is to transmit to the device and another +is to receive from the device. + Required properties: -- compatible: Should be "xlnx,axi-vdma-1.00.a" +- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" - #dma-cells: Should be <1>, see "dmas" property below - reg: Should contain VDMA registers location and length. - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. @@ -55,6 +60,21 @@ axi_vdma_0: axivdma at 40030000 { } ; } ; +axi_dma_0: axidma at 40400000 { + compatible = "xlnx,axi-dma-1.00.a"; + #dma_cells = <1>; + reg = < 0x40400000 0x10000 >; + dma-channel at 40400000 { + compatible = "xlnx,axi-vdma-mm2s-channel"; + interrupts = < 0 59 4 >; + xlnx,datawidth = <0x40>; + } ; + dma-channel at 40400030 { + compatible = "xlnx,axi-vdma-s2mm-channel"; + interrupts = < 0 58 4 >; + xlnx,datawidth = <0x40>; + } ; +} ; * DMA client -- 2.1.2