linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mmcclint@codeaurora.org (Matthew McClintock)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 16/17] qcom: ipq4019: add crypto nodes to ipq4019 SoC and DK01 device tree
Date: Wed, 23 Mar 2016 17:05:11 -0500	[thread overview]
Message-ID: <1458770712-10880-17-git-send-email-mmcclint@codeaurora.org> (raw)
In-Reply-To: <1458770712-10880-1-git-send-email-mmcclint@codeaurora.org>

This adds the crypto nodes to the ipq4019 device tree, it also adds the
BAM node used by crypto as well which the driver currently requires to
operate properly

The crypto driver itself depends on some other patches to qcom_bam_dma
to function properly:

https://lkml.org/lkml/2015/12/1/113

CC: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
---
 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi |  8 ++++++++
 arch/arm/boot/dts/qcom-ipq4019.dtsi           | 25 +++++++++++++++++++++++++
 2 files changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index 21032a8..2c347ad 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -93,6 +93,14 @@
 			status = "ok";
 		};
 
+		cryptobam: dma at 8e04000 {
+			status = "ok";
+		};
+
+		crypto at 8e3a000 {
+			status = "ok";
+		};
+
 		watchdog at b017000 {
 			status = "ok";
 		};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index db48fd3..3cd42c0 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -147,6 +147,31 @@
 			status = "disabled";
 		};
 
+
+		cryptobam: dma at 8e04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x08e04000 0x20000>;
+			interrupts = <GIC_SPI 207 0>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
+		crypto at 8e3a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x08e3a000 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
                 acc0: clock-controller at b088000 {
                         compatible = "qcom,kpss-acc-v1";
                         reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  parent reply	other threads:[~2016-03-23 22:05 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1458770712-10880-1-git-send-email-mmcclint@codeaurora.org>
2016-03-23 22:05 ` [PATCH 10/17] qcom: ipq4019: add watchdog node to ipq4019 SoC and DK01 device tree Matthew McClintock
2016-03-23 22:05 ` [PATCH 11/17] qcom: ipq4019: add support for reset via qcom,ps-hold Matthew McClintock
2016-03-23 22:05 ` [PATCH 12/17] qcom: ipq4019: add spi node to ipq4019 SoC and DK01 device tree Matthew McClintock
2016-03-23 22:05 ` [PATCH 13/17] qcom: ipq4019: add i2c " Matthew McClintock
2016-03-23 22:05 ` [PATCH 15/17] qcom: ipq4019: add cpu operating points for cpufreq support Matthew McClintock
2016-03-23 22:33   ` Stephen Boyd
2017-03-22 14:10   ` [15/17] " Sven Eckelmann
2016-03-23 22:05 ` Matthew McClintock [this message]
2016-03-23 22:05 ` [PATCH 17/17] qcom: ipq4019: add DMA nodes to ipq4019 SoC and DK01 device tree Matthew McClintock

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1458770712-10880-17-git-send-email-mmcclint@codeaurora.org \
    --to=mmcclint@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).