From mboxrd@z Thu Jan 1 00:00:00 1970 From: eric@anholt.net (Eric Anholt) Date: Thu, 24 Mar 2016 17:23:51 -0700 Subject: [PATCH 5/5] ARM: bcm2835: Add the DPI hardware to the device tree. In-Reply-To: <1458865431-30048-1-git-send-email-eric@anholt.net> References: <1458865431-30048-1-git-send-email-eric@anholt.net> Message-ID: <1458865431-30048-6-git-send-email-eric@anholt.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org It's currently marked disabled, as it's not useful without a panel associated with it and the GPIO pins routed to ALT2. Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm283x.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index bbe4eab..d1e6340 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -166,6 +166,17 @@ interrupts = <2 14>; /* pwa1 */ }; + dpi: dpi at 7e208000 { + compatible = "brcm,bcm2835-dpi"; + reg = <0x7e208000 0x8c>; + clocks = <&clocks BCM2835_CLOCK_VPU>, + <&clocks BCM2835_CLOCK_DPI>; + clock-names = "core", "pixel"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + aux: aux at 0x7e215000 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; -- 2.7.0