* [PATCH 1/4] ARM: dts: qcom: msm8974: Add USB gadget nodes
@ 2016-03-29 1:32 Bjorn Andersson
2016-03-29 1:32 ` [PATCH 2/4] ARM: dts: msm8974: Split efs in rfsa and rmtfs Bjorn Andersson
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Bjorn Andersson @ 2016-03-29 1:32 UTC (permalink / raw)
To: linux-arm-kernel
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Add the necessary nodes for USB gadget on MSM8974 and enable these for
Honami.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
.../boot/dts/qcom-msm8974-sony-xperia-honami.dts | 8 +++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 38 ++++++++++++++++++++++
2 files changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index a0398b69f4f2..453eede25a43 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -367,6 +367,14 @@
};
};
+
+ usb-phy at f9a55000 {
+ status = "ok";
+ };
+
+ usb at f9a55000 {
+ status = "ok";
+ };
};
&spmi_bus {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index ef5330578431..927075137b76 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -489,6 +489,44 @@
#dma-cells = <1>;
qcom,ee = <0>;
};
+
+ usb1_phy: usb-phy at f9a55000 {
+ compatible = "qcom,usb-otg-snps";
+
+ reg = <0xf9a55000 0x400>;
+ interrupts-extended = <&intc 0 134 0>, <&intc 0 140 0>,
+ <&spmi_bus 0 0x9 0 0>;
+ interrupt-names = "core_irq", "async_irq", "pmic_id_irq";
+
+ vddcx-supply = <&pm8841_s2>;
+ v3p3-supply = <&pm8941_l24>;
+ v1p8-supply = <&pm8941_l6>;
+
+ dr_mode = "otg";
+ qcom,phy-init-sequence = <0x63 0x81 0xfffffff>;
+ qcom,otg-control = <1>;
+ qcom,phy-num = <0>;
+
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>;
+ reset-names = "phy", "link";
+
+ clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
+ <&gcc GCC_USB_HS_AHB_CLK>;
+ clock-names = "phy", "core", "iface";
+
+ status = "disabled";
+ };
+
+ usb at f9a55000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0xf9a55000 0x400>;
+ dr_mode = "otg";
+ interrupts = <0 134 0>, <0 140 0>;
+ interrupt-names = "core_irq", "async_irq";
+ usb-phy = <&usb1_phy>;
+
+ status = "disabled";
+ };
};
smd {
--
2.5.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 2/4] ARM: dts: msm8974: Split efs in rfsa and rmtfs
2016-03-29 1:32 [PATCH 1/4] ARM: dts: qcom: msm8974: Add USB gadget nodes Bjorn Andersson
@ 2016-03-29 1:32 ` Bjorn Andersson
2016-03-29 1:32 ` [PATCH 3/4] ARM: dts: msm8974: Add node for second i2c from blsp1 Bjorn Andersson
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2016-03-29 1:32 UTC (permalink / raw)
To: linux-arm-kernel
One part of the efs memory region is used specifically for sharing file system
buffers between the apps and modem cpus (aka rmtfs), so better reflect this
split.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 927075137b76..1afee408a923 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -49,8 +49,13 @@
no-map;
};
- efs at 0fd600000 {
- reg = <0x0fd60000 0x1a0000>;
+ rfsa at 0fd60000 {
+ reg = <0x0fd60000 0x20000>;
+ no-map;
+ };
+
+ rmtfs at 0fd80000 {
+ reg = <0x0fd80000 0x180000>;
no-map;
};
--
2.5.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 3/4] ARM: dts: msm8974: Add node for second i2c from blsp1
2016-03-29 1:32 [PATCH 1/4] ARM: dts: qcom: msm8974: Add USB gadget nodes Bjorn Andersson
2016-03-29 1:32 ` [PATCH 2/4] ARM: dts: msm8974: Split efs in rfsa and rmtfs Bjorn Andersson
@ 2016-03-29 1:32 ` Bjorn Andersson
2016-03-29 1:32 ` [PATCH 4/4] ARM: dts: msm8974: Add modem smp2p and smd nodes Bjorn Andersson
2016-03-29 3:41 ` [PATCH 1/4] ARM: dts: qcom: msm8974: Add USB gadget nodes kbuild test robot
3 siblings, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2016-03-29 1:32 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 1afee408a923..d872ddc2d190 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -445,6 +445,17 @@
interrupts = <0 208 0>;
};
+ i2c at f9924000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9924000 0x1000>;
+ interrupts = <0 96 IRQ_TYPE_NONE>;
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
blsp_i2c8: i2c at f9964000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
--
2.5.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 4/4] ARM: dts: msm8974: Add modem smp2p and smd nodes
2016-03-29 1:32 [PATCH 1/4] ARM: dts: qcom: msm8974: Add USB gadget nodes Bjorn Andersson
2016-03-29 1:32 ` [PATCH 2/4] ARM: dts: msm8974: Split efs in rfsa and rmtfs Bjorn Andersson
2016-03-29 1:32 ` [PATCH 3/4] ARM: dts: msm8974: Add node for second i2c from blsp1 Bjorn Andersson
@ 2016-03-29 1:32 ` Bjorn Andersson
2016-03-29 3:41 ` [PATCH 1/4] ARM: dts: qcom: msm8974: Add USB gadget nodes kbuild test robot
3 siblings, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2016-03-29 1:32 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d872ddc2d190..79c9cfcabf77 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -168,6 +168,31 @@
hwlocks = <&tcsr_mutex 3>;
};
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 14>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
smp2p-wcnss {
compatible = "qcom,smp2p";
qcom,smem = <451>, <431>;
@@ -548,6 +573,13 @@
smd {
compatible = "qcom,smd";
+ modem {
+ interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 12>;
+ qcom,smd-edge = <0>;
+ };
+
rpm {
interrupts = <0 168 1>;
qcom,ipc = <&apcs 8 0>;
--
2.5.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 1/4] ARM: dts: qcom: msm8974: Add USB gadget nodes
2016-03-29 1:32 [PATCH 1/4] ARM: dts: qcom: msm8974: Add USB gadget nodes Bjorn Andersson
` (2 preceding siblings ...)
2016-03-29 1:32 ` [PATCH 4/4] ARM: dts: msm8974: Add modem smp2p and smd nodes Bjorn Andersson
@ 2016-03-29 3:41 ` kbuild test robot
3 siblings, 0 replies; 5+ messages in thread
From: kbuild test robot @ 2016-03-29 3:41 UTC (permalink / raw)
To: linux-arm-kernel
Hi Bjorn,
[auto build test ERROR on v4.6-rc1]
[also build test ERROR on next-20160329]
[cannot apply to robh/for-next]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
url: https://github.com/0day-ci/linux/commits/Bjorn-Andersson/ARM-dts-qcom-msm8974-Add-USB-gadget-nodes/20160329-093758
config: arm-multi_v7_defconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=arm
All errors (new ones prefixed by >>):
>> Error: arch/arm/boot/dts/qcom-msm8974.dtsi:510.19-20 syntax error
FATAL ERROR: Unable to parse input tree
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/octet-stream
Size: 37213 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160329/9864eb77/attachment-0001.obj>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-03-29 3:41 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-03-29 1:32 [PATCH 1/4] ARM: dts: qcom: msm8974: Add USB gadget nodes Bjorn Andersson
2016-03-29 1:32 ` [PATCH 2/4] ARM: dts: msm8974: Split efs in rfsa and rmtfs Bjorn Andersson
2016-03-29 1:32 ` [PATCH 3/4] ARM: dts: msm8974: Add node for second i2c from blsp1 Bjorn Andersson
2016-03-29 1:32 ` [PATCH 4/4] ARM: dts: msm8974: Add modem smp2p and smd nodes Bjorn Andersson
2016-03-29 3:41 ` [PATCH 1/4] ARM: dts: qcom: msm8974: Add USB gadget nodes kbuild test robot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).