linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: manabian@gmail.com (Joachim Eastwood)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/7] ARM: dts: lpc4350-hitex-eval: fix unit name warnings from dtc
Date: Wed, 30 Mar 2016 00:30:44 +0200	[thread overview]
Message-ID: <1459290646-3592-6-git-send-email-manabian@gmail.com> (raw)
In-Reply-To: <1459290646-3592-1-git-send-email-manabian@gmail.com>

Fix the following warnings from dtc by either adding or removing
the unit name from the node.

Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /soc/flash-controller at 40003000/flash at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 7 has a unit name, but no reg property

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
---
 arch/arm/boot/dts/lpc4350-hitex-eval.dts | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index 6d0c698..cb65352 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -33,7 +33,7 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory at 28000000 {
 		device_type = "memory";
 		reg = <0x28000000 0x800000>; /* 8 MB */
 	};
@@ -45,50 +45,50 @@
 		poll-interval = <100>;
 		autorepeat;
 
-		button at 0 {
+		button0 {
 			label = "joy:right";
 			linux,code = <KEY_RIGHT>;
 			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
 		};
 
-		button at 1 {
+		button1 {
 			label = "joy:up";
 			linux,code = <KEY_UP>;
 			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
 		};
 
 
-		button at 2 {
+		button2 {
 			label = "joy:enter";
 			linux,code = <KEY_ENTER>;
 			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
 		};
 
-		button at 3 {
+		button3 {
 			label = "joy:left";
 			linux,code = <KEY_LEFT>;
 			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
 		};
 
-		button at 4 {
+		button4 {
 			label = "joy:down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
 		};
 
-		button at 5 {
+		button5 {
 			label = "user:sw3";
 			linux,code = <KEY_F1>;
 			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
 		};
 
-		button at 6 {
+		button6 {
 			label = "user:sw4";
 			linux,code = <KEY_F2>;
 			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
 		};
 
-		button at 7 {
+		button7 {
 			label = "user:sw5";
 			linux,code = <KEY_F3>;
 			gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
@@ -453,7 +453,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spifi_pins>;
 
-	flash at 0 {
+	flash {
 		compatible = "jedec,spi-nor";
 		spi-rx-bus-width = <4>;
 		#address-cells = <1>;
-- 
2.7.4

  parent reply	other threads:[~2016-03-29 22:30 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-29 22:30 [PATCH 0/7] fix unit name warnings on lpc18xx Joachim Eastwood
2016-03-29 22:30 ` [PATCH 1/7] ARM: dts: armv7-m: add unit name to interrupt-controller Joachim Eastwood
2016-04-04  6:05   ` Uwe Kleine-König
2016-04-04  6:42     ` Joachim Eastwood
2016-04-04  6:51       ` Stefan Agner
2016-04-04  7:30       ` Uwe Kleine-König
2016-03-29 22:30 ` [PATCH 2/7] ARM: dts: skeleton: add unit name to memory node Joachim Eastwood
2016-03-30 10:12   ` Vladimir Zapolskiy
2016-03-30 11:06   ` Mark Rutland
2016-03-30 12:36     ` Joachim Eastwood
2016-03-30 13:06     ` Vladimir Zapolskiy
2016-03-30 13:41       ` Mark Rutland
2016-03-30 16:15         ` Joachim Eastwood
2016-03-30 17:06           ` Mark Rutland
2016-03-30 20:45             ` Joachim Eastwood
2016-03-31 10:38               ` Mark Rutland
2016-03-31 15:21                 ` Joachim Eastwood
2016-03-31 16:34                   ` Joachim Eastwood
2016-04-12 22:45                     ` Rob Herring
2016-04-12 23:03                       ` Joachim Eastwood
2016-03-31 16:27           ` Rob Herring
2016-03-31 16:31             ` Rob Herring
2016-03-31 16:33               ` Joachim Eastwood
2016-03-29 22:30 ` [PATCH 3/7] ARM: dts: lpc18xx: remove unit addresses from creg childs Joachim Eastwood
2016-03-29 22:30 ` [PATCH 4/7] ARM: dts: lpc4357-ea4357: fix unit name warnings from dtc Joachim Eastwood
2016-03-29 22:30 ` Joachim Eastwood [this message]
2016-03-29 22:30 ` [PATCH 6/7] ARM: dts: lpc4337-ciaa:: fix unit name warning " Joachim Eastwood
2016-03-29 22:30 ` [PATCH 7/7] dt-bindings: phy-lpc18xx-usb-otg: remove unit address from binding Joachim Eastwood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1459290646-3592-6-git-send-email-manabian@gmail.com \
    --to=manabian@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).