From mboxrd@z Thu Jan 1 00:00:00 1970 From: manabian@gmail.com (Joachim Eastwood) Date: Wed, 30 Mar 2016 00:30:44 +0200 Subject: [PATCH 5/7] ARM: dts: lpc4350-hitex-eval: fix unit name warnings from dtc In-Reply-To: <1459290646-3592-1-git-send-email-manabian@gmail.com> References: <1459290646-3592-1-git-send-email-manabian@gmail.com> Message-ID: <1459290646-3592-6-git-send-email-manabian@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Fix the following warnings from dtc by either adding or removing the unit name from the node. Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /soc/flash-controller at 40003000/flash at 0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /pca_buttons/button at 0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /pca_buttons/button at 1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /pca_buttons/button at 2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /pca_buttons/button at 3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /pca_buttons/button at 4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /pca_buttons/button at 5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /pca_buttons/button at 6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /pca_buttons/button at 7 has a unit name, but no reg property Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc4350-hitex-eval.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts index 6d0c698..cb65352 100644 --- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -33,7 +33,7 @@ stdout-path = &uart0; }; - memory { + memory at 28000000 { device_type = "memory"; reg = <0x28000000 0x800000>; /* 8 MB */ }; @@ -45,50 +45,50 @@ poll-interval = <100>; autorepeat; - button at 0 { + button0 { label = "joy:right"; linux,code = ; gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>; }; - button at 1 { + button1 { label = "joy:up"; linux,code = ; gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>; }; - button at 2 { + button2 { label = "joy:enter"; linux,code = ; gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>; }; - button at 3 { + button3 { label = "joy:left"; linux,code = ; gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>; }; - button at 4 { + button4 { label = "joy:down"; linux,code = ; gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>; }; - button at 5 { + button5 { label = "user:sw3"; linux,code = ; gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>; }; - button at 6 { + button6 { label = "user:sw4"; linux,code = ; gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>; }; - button at 7 { + button7 { label = "user:sw5"; linux,code = ; gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>; @@ -453,7 +453,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spifi_pins>; - flash at 0 { + flash { compatible = "jedec,spi-nor"; spi-rx-bus-width = <4>; #address-cells = <1>; -- 2.7.4