From mboxrd@z Thu Jan 1 00:00:00 1970 From: mcoquelin.stm32@gmail.com (Maxime Coquelin) Date: Thu, 31 Mar 2016 17:09:35 +0200 Subject: [PATCH v2 5/9] Documentation: dt-bindings: Add IRQ related properties of STM32 pinctrl In-Reply-To: <1459436979-17275-1-git-send-email-mcoquelin.stm32@gmail.com> References: <1459436979-17275-1-git-send-email-mcoquelin.stm32@gmail.com> Message-ID: <1459436979-17275-6-git-send-email-mcoquelin.stm32@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Signed-off-by: Maxime Coquelin --- Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index 7b4800cc251e..dd95becba966 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -13,6 +13,9 @@ Required properies: - #size-cells : The value of this property must be 1 - ranges : defines mapping between pin controller node (parent) to gpio-bank node (children). + - interrupt-parent: phandle of the interrupt parent to which the external + GPIO interrupts are forwarded to. + - st,syscfg: phandle of the syscfg node used for IRQ mux selection. - pins-are-numbered: Specify the subnodes are using numbered pinmux to specify pins. -- 1.9.1