From mboxrd@z Thu Jan 1 00:00:00 1970 From: akshay.bhat@timesys.com (Akshay Bhat) Date: Fri, 1 Apr 2016 17:19:30 -0400 Subject: [PATCH] arm: dts: imx6q-ba16: Disable pwm2 by default Message-ID: <1459545570-16390-1-git-send-email-akshay.bhat@timesys.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Justin Waters pwm2 is provided on the BA16 Q7 module, but is not used on any of the current configurations. However, future platforms may utilize this device, so we are simply disabling the node rather than removing it completely. Signed-off-by: Justin Waters Signed-off-by: Akshay Bhat --- arch/arm/boot/dts/imx6q-ba16.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index fcc7b50..3f33a2a 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -337,7 +337,7 @@ &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; - status = "okay"; + status = "disabled"; }; &sata { -- 2.8.0